/* $NetBSD: log.c,v 1.2 2017/01/28 21:31:49 christos Exp $ */ /* * Copyright (c) 1997 - 2007 Kungliga Tekniska Högskolan * (Royal Institute of Technology, Stockholm, Sweden). * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * * 3. Neither the name of the Institute nor the names of its contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE INSTITUTE AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE INSTITUTE OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. */ #include "kadm5_locl.h" #include "heim_threads.h" __RCSID("$NetBSD: log.c,v 1.2 2017/01/28 21:31:49 christos Exp $"); /* * A log consists of a sequence of records of this form: * * version number 4 bytes -\ * time in seconds 4 bytes +> preamble --+> header * operation (enum kadm_ops) 4 bytes -/ / * n, length of payload 4 bytes --------------+ * PAYLOAD DATA... n bytes * n, length of payload 4 bytes ----------------+> trailer * version number 4 bytes ->postamble ---/ * * I.e., records have a header and a trailer so that knowing the offset * of an record's start or end one can traverse the log forwards and * backwards. * * The log always starts with a nop record (uber record) that contains the * offset (8 bytes) of the first unconfirmed record (typically EOF), and the * version number and timestamp of the preceding last confirmed record: * * offset of next new record 8 bytes * last record time 4 bytes * last record version number 4 bytes * * When an iprop slave receives a complete database, it saves that version as * the last confirmed version, without writing any other records to the log. We * use that version as the basis for further updates. * * kadm5 write operations are done in this order: * * - replay unconfirmed log records * - write (append) and fsync() the log record for the kadm5 update * - update the HDB (which includes fsync() or moral equivalent) * - update the log uber record to mark the log record written as * confirmed (not fsync()ed) * * This makes it possible and safe to seek to the logical end of the log * (that is, the end of the last confirmed record) without traversing * the whole log forward from offset zero. Unconfirmed records (which * -currently- should never be more than one) can then be found (and * rolled forward) by traversing forward from the logical end of the * log. The trailers make it possible to traverse the log backwards * from the logical end. * * This also makes the log + the HDB a two-phase commit with * roll-forward system. * * HDB entry exists and HDB entry does not exist errors occurring during * replay of unconfirmed records are ignored. This is because the * corresponding HDB update might have completed. But also because a * change to add aliases to a principal can fail because we don't check * for alias conflicts before going ahead with the write operation. * * Non-sensical and incomplete log records found during roll-forward are * truncated. A log record is non-sensical if its header and trailer * don't match. * * Recovery (by rolling forward) occurs at the next read or write by a * kadm5 API reader (e.g., kadmin), but not by an hdb API reader (e.g., * the KDC). This means that, e.g., a principal rename could fail in * between the store and the delete, and recovery might not take place * until the next write operation. * * The log record payload format for create is: * * DER-encoded HDB_entry n bytes * * The log record payload format for update is: * * mask 4 bytes * DER-encoded HDB_entry n-4 bytes * * The log record payload format for delete is: * * krb5_store_principal n bytes * * The log record payload format for rename is: * * krb5_store_principal m bytes (old principal name) * DER-encoded HDB_entry n-m bytes (new record) * * The log record payload format for nop varies: * * - The zeroth record in new logs is a nop with a 16 byte payload: * * offset of end of last confirmed record 8 bytes * timestamp of last confirmed record 4 bytes * version number of last confirmed record 4 bytes * * - New non-zeroth nop records: * * nop type 4 bytes * * - Old nop records: * * version number 4 bytes * timestamp 4 bytes * * Upon initialization, the log's uber record will have version 1, and * will be followed by a nop record with version 2. The version numbers * of additional records will be monotonically increasing. * * Truncation (kadm5_log_truncate()) takes some N > 0 records from the * tail of the log and writes them to the beginning of the log after an * uber record whose version will then be one less than the first of * those records. * * On masters the log should never have more than one unconfirmed * record, but slaves append all of a master's "diffs" and then call * kadm5_log_recover() to recover. */ /* * HDB and log lock order on the master: * * 1) open and lock the HDB * 2) open and lock the log * 3) do something * 4) unlock and close the log * 5) repeat (2)..(4) if desired * 6) unlock and close the HDB * * The kadmin -l lock command can be used to hold the HDB open and * locked for multiple operations. * * HDB and log lock order on the slave: * * 1) open and lock the log * 2) open and lock the HDB * 3) replay entries * 4) unlock and close the HDB * 5) repeat (2)..(4) until signaled * 6) unlock and close the HDB * * The slave doesn't want to allow other local writers, after all, thus * the order is reversed. This means that using "kadmin -l" on a slave * will deadlock with ipropd-slave -- don't do that. */ #define LOG_HEADER_SZ ((off_t)(sizeof(uint32_t) * 4)) #define LOG_TRAILER_SZ ((off_t)(sizeof(uint32_t) * 2)) #define LOG_WRAPPER_SZ ((off_t)(LOG_HEADER_SZ + LOG_TRAILER_SZ)) #define LOG_UBER_LEN ((off_t)(sizeof(uint64_t) + sizeof(uint32_t) * 2)) #define LOG_UBER_SZ ((off_t)(LOG_WRAPPER_SZ + LOG_UBER_LEN)) #define LOG_NOPEEK 0 #define LOG_DOPEEK 1 /* * Read the header of the record starting at the current offset into sp. * * Preserves sp's offset on success if `peek', else skips the header. * * Preserves sp's offset on failure where possible. */ static kadm5_ret_t get_header(krb5_storage *sp, int peek, uint32_t *verp, uint32_t *tstampp, enum kadm_ops *opp, uint32_t *lenp) { krb5_error_code ret; uint32_t tstamp, op, len; off_t off, new_off; if (tstampp == NULL) tstampp = &tstamp; if (lenp == NULL) lenp = &len; *verp = 0; *tstampp = 0; if (opp != NULL) *opp = kadm_nop; *lenp = 0; off = krb5_storage_seek(sp, 0, SEEK_CUR); if (off < 0) return errno; ret = krb5_ret_uint32(sp, verp); if (ret == HEIM_ERR_EOF) { (void) krb5_storage_seek(sp, off, SEEK_SET); return HEIM_ERR_EOF; } if (ret) goto log_corrupt; ret = krb5_ret_uint32(sp, tstampp); if (ret) goto log_corrupt; /* Note: sizeof(*opp) might not == sizeof(op) */ ret = krb5_ret_uint32(sp, &op); if (ret) goto log_corrupt; if (opp != NULL) *opp = op; ret = krb5_ret_uint32(sp, lenp); if (ret) goto log_corrupt; /* Restore offset if requested */ if (peek == LOG_DOPEEK) { new_off = krb5_storage_seek(sp, off, SEEK_SET); if (new_off == -1) return errno; if (new_off != off) return EIO; } return 0; log_corrupt: (void) krb5_storage_seek(sp, off, SEEK_SET); return KADM5_LOG_CORRUPT; } /* * Seek to the start of the preceding record's header and returns its * offset. If sp is at offset zero this sets *verp = 0 and returns 0. * * Does not verify the header of the previous entry. * * On error returns -1, setting errno (possibly to a kadm5_ret_t or * krb5_error_code value) and preserves sp's offset where possible. */ static off_t seek_prev(krb5_storage *sp, uint32_t *verp, uint32_t *lenp) { krb5_error_code ret; uint32_t len, ver; off_t off_len; off_t off, new_off; if (lenp == NULL) lenp = &len; if (verp == NULL) verp = &ver; *verp = 0; *lenp = 0; off = krb5_storage_seek(sp, 0, SEEK_CUR); if (off < 0) return off; if (off == 0) return 0; /* Check that `off' allows for the record's header and trailer */ if (off < LOG_WRAPPER_SZ) goto log_corrupt; /* Get the previous entry's length and version from its trailer */ new_off = krb5_storage_seek(sp, -8, SEEK_CUR); if (new_off == -1) return -1; if (new_off != off - 8) { errno = EIO; return -1; } ret = krb5_ret_uint32(sp, lenp); if (ret) goto log_corrupt; /* Check for overflow/sign extension */ off_len = (off_t)*lenp; if (off_len < 0 || *lenp != (uint32_t)off_len) goto log_corrupt; ret = krb5_ret_uint32(sp, verp); if (ret) goto log_corrupt; /* Check that `off' allows for the record */ if (off < LOG_WRAPPER_SZ + off_len) goto log_corrupt; /* Seek backwards to the entry's start */ new_off = krb5_storage_seek(sp, -(LOG_WRAPPER_SZ + off_len), SEEK_CUR); if (new_off == -1) return -1; if (new_off != off - (LOG_WRAPPER_SZ + off_len)) { errno = EIO; return -1; } return new_off; log_corrupt: (void) krb5_storage_seek(sp, off, SEEK_SET); errno = KADM5_LOG_CORRUPT; return -1; } /* * Seek to the start of the next entry's header. * * On error returns -1 and preserves sp's offset. */ static off_t seek_next(krb5_storage *sp) { krb5_error_code ret; uint32_t ver, ver2, len, len2; enum kadm_ops op; uint32_t tstamp; off_t off, off_len, new_off; off = krb5_storage_seek(sp, 0, SEEK_CUR); if (off < 0) return off; errno = get_header(sp, LOG_NOPEEK, &ver, &tstamp, &op, &len); if (errno) return -1; /* Check for overflow */ off_len = len; if (off_len < 0) goto log_corrupt; new_off = krb5_storage_seek(sp, off_len, SEEK_CUR); if (new_off == -1) { (void) krb5_storage_seek(sp, off, SEEK_SET); return -1; } if (new_off != off + LOG_HEADER_SZ + off_len) goto log_corrupt; ret = krb5_ret_uint32(sp, &len2); if (ret || len2 != len) goto log_corrupt; ret = krb5_ret_uint32(sp, &ver2); if (ret || ver2 != ver) goto log_corrupt; new_off = krb5_storage_seek(sp, 0, SEEK_CUR); if (new_off == -1) { (void) krb5_storage_seek(sp, off, SEEK_SET); return -1; } if (new_off != off + off_len + LOG_WRAPPER_SZ) goto log_corrupt; return off + off_len + LOG_WRAPPER_SZ; log_corrupt: (void) krb5_storage_seek(sp, off, SEEK_SET); errno = KADM5_LOG_CORRUPT; return -1; } /* * Get the version of the entry ending at the current offset into sp. * If it is the uber record, return its nominal version instead. * * Returns HEIM_ERR_EOF if sp is at offset zero. * * Preserves sp's offset. */ static kadm5_ret_t get_version_prev(krb5_storage *sp, uint32_t *verp, uint32_t *tstampp) { krb5_error_code ret; uint32_t ver, ver2, len, len2; off_t off, prev_off, new_off; *verp = 0; if (tstampp != NULL) *tstampp = 0; off = krb5_storage_seek(sp, 0, SEEK_CUR); if (off < 0) return errno; if (off == 0) return HEIM_ERR_EOF; /* Read the trailer and seek back */ prev_off = seek_prev(sp, &ver, &len); if (prev_off == -1) return errno; /* Uber record? Return nominal version. */ if (prev_off == 0 && len == LOG_UBER_LEN && ver == 0) { /* Skip 8 byte offset and 4 byte time */ if (krb5_storage_seek(sp, LOG_HEADER_SZ + 12, SEEK_SET) != LOG_HEADER_SZ + 12) return errno; ret = krb5_ret_uint32(sp, verp); if (krb5_storage_seek(sp, 0, SEEK_SET) != 0) return errno; if (ret != 0) return ret; } else { *verp = ver; } /* Verify that the trailer matches header */ ret = get_header(sp, LOG_NOPEEK, &ver2, tstampp, NULL, &len2); if (ret || ver != ver2 || len != len2) goto log_corrupt; /* Preserve offset */ new_off = krb5_storage_seek(sp, off, SEEK_SET); if (new_off == -1) return errno; if (new_off != off) { errno = EIO; return errno; } return 0; log_corrupt: (void) krb5_storage_seek(sp, off, SEEK_SET); return KADM5_LOG_CORRUPT; } static size_t get_max_log_size(krb5_context context) { off_t n; /* Use database-label-specific lookup? No, ETOOHARD. */ /* Default to 50MB max log size */ n = krb5_config_get_int_default(context, NULL, 52428800, "kdc", "log-max-size", NULL); if (n >= 4 * (LOG_UBER_LEN + LOG_WRAPPER_SZ) && n == (size_t)n) return (size_t)n; return 0; } static kadm5_ret_t truncate_if_needed(kadm5_server_context *); static krb5_storage *log_goto_first(kadm5_server_context *, int); /* * Get the version and timestamp metadata of either the first, or last * confirmed entry in the log. * * If `which' is LOG_VERSION_UBER, then this gets the version number of the uber * uber record which must be 0, or else we need to upgrade the log. * * If `which' is LOG_VERSION_FIRST, then this gets the metadata for the * logically first entry past the uberblock, or returns HEIM_EOF if * only the uber record is present. * * If `which' is LOG_VERSION_LAST, then this gets metadata for the last * confirmed entry's version and timestamp. If only the uber record is present, * then the version will be its "nominal" version, which may differ from its * actual version (0). * * The `fd''s offset will be set to the start of the header of the entry * identified by `which'. */ kadm5_ret_t kadm5_log_get_version_fd(kadm5_server_context *server_context, int fd, int which, uint32_t *ver, uint32_t *tstamp) { kadm5_ret_t ret = 0; krb5_storage *sp; enum kadm_ops op = kadm_get; uint32_t len = 0; uint32_t tmp; if (fd == -1) return 0; /* /dev/null */ if (tstamp == NULL) tstamp = &tmp; *ver = 0; *tstamp = 0; switch (which) { case LOG_VERSION_LAST: sp = kadm5_log_goto_end(server_context, fd); if (sp == NULL) return errno; ret = get_version_prev(sp, ver, tstamp); krb5_storage_free(sp); break; case LOG_VERSION_FIRST: sp = log_goto_first(server_context, fd); if (sp == NULL) return errno; ret = get_header(sp, LOG_DOPEEK, ver, tstamp, NULL, NULL); krb5_storage_free(sp); break; case LOG_VERSION_UBER: sp = krb5_storage_from_fd(server_context->log_context.log_fd); if (sp == NULL) return errno; if (krb5_storage_seek(sp, 0, SEEK_SET) == 0) ret = get_header(sp, LOG_DOPEEK, ver, tstamp, &op, &len); else ret = errno; if (ret == 0 && (op != kadm_nop || len != LOG_UBER_LEN || *ver != 0)) ret = KADM5_LOG_NEEDS_UPGRADE; krb5_storage_free(sp); break; default: return ENOTSUP; } return ret; } /* Get the version of the last confirmed entry in the log */ kadm5_ret_t kadm5_log_get_version(kadm5_server_context *server_context, uint32_t *ver) { return kadm5_log_get_version_fd(server_context, server_context->log_context.log_fd, LOG_VERSION_LAST, ver, NULL); } /* Sets the version in the context, but NOT in the log */ kadm5_ret_t kadm5_log_set_version(kadm5_server_context *context, uint32_t vno) { kadm5_log_context *log_context = &context->log_context; log_context->version = vno; return 0; } /* * Open the log and setup server_context->log_context */ static kadm5_ret_t log_open(kadm5_server_context *server_context, int lock_mode) { int fd = -1; int lock_it = 0; int lock_nb = 0; int oflags = O_RDWR; kadm5_ret_t ret; kadm5_log_context *log_context = &server_context->log_context; if (lock_mode & LOCK_NB) { lock_mode &= ~LOCK_NB; lock_nb = LOCK_NB; } if (lock_mode == log_context->lock_mode && log_context->log_fd != -1) return 0; if (strcmp(log_context->log_file, "/dev/null") == 0) { /* log_context->log_fd should be -1 here */ return 0; } if (log_context->log_fd != -1) { /* Lock or change lock */ fd = log_context->log_fd; if (lseek(fd, 0, SEEK_SET) == -1) return errno; lock_it = (lock_mode != log_context->lock_mode); } else { /* Open and lock */ if (lock_mode != LOCK_UN) oflags |= O_CREAT; fd = open(log_context->log_file, oflags, 0600); if (fd < 0) { ret = errno; krb5_set_error_message(server_context->context, ret, "log_open: open %s", log_context->log_file); return ret; } lock_it = (lock_mode != LOCK_UN); } if (lock_it && flock(fd, lock_mode | lock_nb) < 0) { ret = errno; krb5_set_error_message(server_context->context, ret, "log_open: flock %s", log_context->log_file); if (fd != log_context->log_fd) (void) close(fd); return ret; } log_context->log_fd = fd; log_context->lock_mode = lock_mode; log_context->read_only = (lock_mode != LOCK_EX); return 0; } /* * Open the log and setup server_context->log_context */ static kadm5_ret_t log_init(kadm5_server_context *server_context, int lock_mode) { int fd; struct stat st; uint32_t vno; size_t maxbytes = get_max_log_size(server_context->context); kadm5_ret_t ret; kadm5_log_context *log_context = &server_context->log_context; if (strcmp(log_context->log_file, "/dev/null") == 0) { /* log_context->log_fd should be -1 here */ return 0; } ret = log_open(server_context, lock_mode); if (ret) return ret; fd = log_context->log_fd; if (!log_context->read_only) { if (fstat(fd, &st) == -1) ret = errno; if (ret == 0 && st.st_size == 0) { /* Write first entry */ log_context->version = 0; ret = kadm5_log_nop(server_context, kadm_nop_plain); if (ret == 0) return 0; /* no need to truncate_if_needed(): it's not */ } if (ret == 0) { ret = kadm5_log_get_version_fd(server_context, fd, LOG_VERSION_UBER, &vno, NULL); /* Upgrade the log if it was an old-style log */ if (ret == KADM5_LOG_NEEDS_UPGRADE) ret = kadm5_log_truncate(server_context, 0, maxbytes / 4); } if (ret == 0) ret = kadm5_log_recover(server_context, kadm_recover_replay); } if (ret == 0) { ret = kadm5_log_get_version_fd(server_context, fd, LOG_VERSION_LAST, &log_context->version, NULL); if (ret == HEIM_ERR_EOF) ret = 0; } if (ret == 0) ret = truncate_if_needed(server_context); if (ret != 0) (void) kadm5_log_end(server_context); return ret; } /* Open the log with an exclusive lock */ kadm5_ret_t kadm5_log_init(kadm5_server_context *server_context) { return log_init(server_context, LOCK_EX); } /* Open the log with an exclusive non-blocking lock */ kadm5_ret_t kadm5_log_init_nb(kadm5_server_context *server_context) { return log_init(server_context, LOCK_EX | LOCK_NB); } /* Open the log with no locks */ kadm5_ret_t kadm5_log_init_nolock(kadm5_server_context *server_context) { return log_init(server_context, LOCK_UN); } /* Open the log with a shared lock */ kadm5_ret_t kadm5_log_init_sharedlock(kadm5_server_context *server_context, int lock_flags) { return log_init(server_context, LOCK_SH | lock_flags); } /* * Reinitialize the log and open it */ kadm5_ret_t kadm5_log_reinit(kadm5_server_context *server_context, uint32_t vno) { int ret; kadm5_log_context *log_context = &server_context->log_context; ret = log_open(server_context, LOCK_EX); if (ret) return ret; if (log_context->log_fd != -1) { if (ftruncate(log_context->log_fd, 0) < 0) { ret = errno; return ret; } if (lseek(log_context->log_fd, 0, SEEK_SET) < 0) { ret = errno; return ret; } } /* Write uber entry and truncation nop with version `vno` */ log_context->version = vno; return kadm5_log_nop(server_context, kadm_nop_plain); } /* Close the server_context->log_context. */ kadm5_ret_t kadm5_log_end(kadm5_server_context *server_context) { kadm5_log_context *log_context = &server_context->log_context; kadm5_ret_t ret = 0; int fd = log_context->log_fd; if (fd != -1) { if (log_context->lock_mode != LOCK_UN) { if (flock(fd, LOCK_UN) == -1 && errno == EBADF) ret = errno; } if (ret != EBADF && close(fd) == -1) ret = errno; } log_context->log_fd = -1; log_context->lock_mode = LOCK_UN; return ret; } /* * Write the version, timestamp, and op for a new entry. * * Note that the sp should be a krb5_storage_emem(), not a file. * * On success the sp's offset will be where the length of the payload * should be written. */ static kadm5_ret_t kadm5_log_preamble(kadm5_server_context *context, krb5_storage *sp, enum kadm_ops op, uint32_t vno) { kadm5_log_context *log_context = &context->log_context; time_t now = time(NULL); kadm5_ret_t ret; ret = krb5_store_uint32(sp, vno); if (ret) return ret; ret = krb5_store_uint32(sp, now); if (ret) return ret; log_context->last_time = now; if (op < kadm_first || op > kadm_last) return ERANGE; return krb5_store_uint32(sp, op); } /* Writes the version part of the trailer */ static kadm5_ret_t kadm5_log_postamble(kadm5_log_context *context, krb5_storage *sp, uint32_t vno) { return krb5_store_uint32(sp, vno); } /* * Signal the ipropd-master about changes to the log. */ /* * XXX Get rid of the ifdef by having a sockaddr in log_context in both * cases. * * XXX Better yet, just connect to the master's socket that slaves * connect to, and then disconnect. The master should then check the * log on every connection accepted. Then we wouldn't need IPC to * signal the master. */ void kadm5_log_signal_master(kadm5_server_context *context) { kadm5_log_context *log_context = &context->log_context; #ifndef NO_UNIX_SOCKETS sendto(log_context->socket_fd, (void *)&log_context->version, sizeof(log_context->version), 0, (struct sockaddr *)&log_context->socket_name, sizeof(log_context->socket_name)); #else sendto(log_context->socket_fd, (void *)&log_context->version, sizeof(log_context->version), 0, log_context->socket_info->ai_addr, log_context->socket_info->ai_addrlen); #endif } /* * Write sp's contents (which must be a fully formed record, complete * with header, payload, and trailer) to the log and fsync the log. * * Does not free sp. */ static kadm5_ret_t kadm5_log_flush(kadm5_server_context *context, krb5_storage *sp) { kadm5_log_context *log_context = &context->log_context; kadm5_ret_t ret; krb5_data data; size_t len; krb5_ssize_t bytes; uint32_t new_ver, prev_ver; off_t off, end; if (strcmp(log_context->log_file, "/dev/null") == 0) return 0; if (log_context->read_only) return EROFS; if (krb5_storage_seek(sp, 0, SEEK_SET) == -1) return errno; ret = get_header(sp, LOG_DOPEEK, &new_ver, NULL, NULL, NULL); if (ret) return ret; ret = krb5_storage_to_data(sp, &data); if (ret) return ret; /* Abandon the emem storage reference */ sp = krb5_storage_from_fd(log_context->log_fd); if (sp == NULL) { krb5_data_free(&data); return ENOMEM; } /* Check that we are at the end of the log and fail if not */ off = krb5_storage_seek(sp, 0, SEEK_CUR); if (off == -1) { krb5_data_free(&data); krb5_storage_free(sp); return errno; } end = krb5_storage_seek(sp, 0, SEEK_END); if (end == -1) { krb5_data_free(&data); krb5_storage_free(sp); return errno; } if (end != off) { krb5_data_free(&data); krb5_storage_free(sp); return KADM5_LOG_CORRUPT; } /* Enforce monotonically incremented versioning of records */ if (seek_prev(sp, &prev_ver, NULL) == -1 || krb5_storage_seek(sp, end, SEEK_SET) == -1) { ret = errno; krb5_data_free(&data); krb5_storage_free(sp); return ret; } if (prev_ver != 0 && prev_ver != log_context->version) return EINVAL; /* Internal error, really; just a consistency check */ if (prev_ver != 0 && new_ver != prev_ver + 1) { krb5_warnx(context->context, "refusing to write a log record " "with non-monotonic version (new: %u, old: %u)", new_ver, prev_ver); return KADM5_LOG_CORRUPT; } len = data.length; bytes = krb5_storage_write(sp, data.data, len); krb5_data_free(&data); if (bytes < 0) { krb5_storage_free(sp); return errno; } if (bytes != (krb5_ssize_t)len) { krb5_storage_free(sp); return EIO; } ret = krb5_storage_fsync(sp); krb5_storage_free(sp); if (ret) return ret; /* Retain the nominal database version when flushing the uber record */ if (new_ver != 0) log_context->version = new_ver; return 0; } /* * Add a `create' operation to the log and perform the create against the HDB. */ kadm5_ret_t kadm5_log_create(kadm5_server_context *context, hdb_entry *entry) { krb5_storage *sp; kadm5_ret_t ret; krb5_data value; hdb_entry_ex ent; kadm5_log_context *log_context = &context->log_context; memset(&ent, 0, sizeof(ent)); ent.ctx = 0; ent.free_entry = 0; ent.entry = *entry; /* * If we're not logging then we can't recover-to-perform, so just * perform. */ if (strcmp(log_context->log_file, "/dev/null") == 0) return context->db->hdb_store(context->context, context->db, 0, &ent); /* * Test for any conflicting entries before writing the log. If we commit * to the log we'll end-up rolling forward on recovery, but that would be * wrong if the initial create is rejected. */ ret = context->db->hdb_store(context->context, context->db, HDB_F_PRECHECK, &ent); if (ret == 0) ret = hdb_entry2value(context->context, entry, &value); if (ret) return ret; sp = krb5_storage_emem(); if (sp == NULL) ret = ENOMEM; if (ret == 0) ret = kadm5_log_preamble(context, sp, kadm_create, log_context->version + 1); if (ret == 0) ret = krb5_store_uint32(sp, value.length); if (ret == 0) { if (krb5_storage_write(sp, value.data, value.length) != (krb5_ssize_t)value.length) ret = errno; } if (ret == 0) ret = krb5_store_uint32(sp, value.length); if (ret == 0) ret = kadm5_log_postamble(log_context, sp, log_context->version + 1); if (ret == 0) ret = kadm5_log_flush(context, sp); krb5_storage_free(sp); krb5_data_free(&value); if (ret == 0) ret = kadm5_log_recover(context, kadm_recover_commit); return ret; } /* * Read the data of a create log record from `sp' and change the * database. */ static kadm5_ret_t kadm5_log_replay_create(kadm5_server_context *context, uint32_t ver, uint32_t len, krb5_storage *sp) { krb5_error_code ret; krb5_data data; hdb_entry_ex ent; memset(&ent, 0, sizeof(ent)); ret = krb5_data_alloc(&data, len); if (ret) { krb5_set_error_message(context->context, ret, "out of memory"); return ret; } krb5_storage_read(sp, data.data, len); ret = hdb_value2entry(context->context, &data, &ent.entry); krb5_data_free(&data); if (ret) { krb5_set_error_message(context->context, ret, "Unmarshaling hdb entry in log failed, " "version: %ld", (long)ver); return ret; } ret = context->db->hdb_store(context->context, context->db, 0, &ent); hdb_free_entry(context->context, &ent); return ret; } /* * Add a `delete' operation to the log. */ kadm5_ret_t kadm5_log_delete(kadm5_server_context *context, krb5_principal princ) { kadm5_ret_t ret; kadm5_log_context *log_context = &context->log_context; krb5_storage *sp; uint32_t len = 0; /* So dumb compilers don't warn */ off_t end_off = 0; /* Ditto; this allows de-indentation by two levels */ off_t off; if (strcmp(log_context->log_file, "/dev/null") == 0) return context->db->hdb_remove(context->context, context->db, 0, princ); ret = context->db->hdb_remove(context->context, context->db, HDB_F_PRECHECK, princ); if (ret) return ret; sp = krb5_storage_emem(); if (sp == NULL) ret = ENOMEM; if (ret == 0) ret = kadm5_log_preamble(context, sp, kadm_delete, log_context->version + 1); if (ret) { krb5_storage_free(sp); return ret; } /* * Write a 0 length which we overwrite once we know the length of * the principal name payload. */ off = krb5_storage_seek(sp, 0, SEEK_CUR); if (off == -1) ret = errno; if (ret == 0) ret = krb5_store_uint32(sp, 0); if (ret == 0) ret = krb5_store_principal(sp, princ); if (ret == 0) { end_off = krb5_storage_seek(sp, 0, SEEK_CUR); if (end_off == -1) ret = errno; else if (end_off < off) ret = KADM5_LOG_CORRUPT; } if (ret == 0) { /* We wrote sizeof(uint32_t) + payload length bytes */ len = (uint32_t)(end_off - off); if (end_off - off != len || len < sizeof(len)) ret = KADM5_LOG_CORRUPT; else len -= sizeof(len); } if (ret == 0 && krb5_storage_seek(sp, off, SEEK_SET) == -1) ret = errno; if (ret == 0) ret = krb5_store_uint32(sp, len); if (ret == 0 && krb5_storage_seek(sp, end_off, SEEK_SET) == -1) ret = errno; if (ret == 0) ret = krb5_store_uint32(sp, len); if (ret == 0) ret = kadm5_log_postamble(log_context, sp, log_context->version + 1); if (ret == 0) ret = kadm5_log_flush(context, sp); if (ret == 0) ret = kadm5_log_recover(context, kadm_recover_commit); krb5_storage_free(sp); return ret; } /* * Read a `delete' log operation from `sp' and apply it. */ static kadm5_ret_t kadm5_log_replay_delete(kadm5_server_context *context, uint32_t ver, uint32_t len, krb5_storage *sp) { krb5_error_code ret; krb5_principal principal; ret = krb5_ret_principal(sp, &principal); if (ret) { krb5_set_error_message(context->context, ret, "Failed to read deleted " "principal from log version: %ld", (long)ver); return ret; } ret = context->db->hdb_remove(context->context, context->db, 0, principal); krb5_free_principal(context->context, principal); return ret; } static kadm5_ret_t kadm5_log_replay_rename(kadm5_server_context *, uint32_t, uint32_t, krb5_storage *); /* * Add a `rename' operation to the log. */ kadm5_ret_t kadm5_log_rename(kadm5_server_context *context, krb5_principal source, hdb_entry *entry) { krb5_storage *sp; kadm5_ret_t ret; uint32_t len = 0; /* So dumb compilers don't warn */ off_t end_off = 0; /* Ditto; this allows de-indentation by two levels */ off_t off; krb5_data value; hdb_entry_ex ent; kadm5_log_context *log_context = &context->log_context; memset(&ent, 0, sizeof(ent)); ent.ctx = 0; ent.free_entry = 0; ent.entry = *entry; if (strcmp(log_context->log_file, "/dev/null") == 0) { ret = context->db->hdb_store(context->context, context->db, 0, &ent); if (ret == 0) return context->db->hdb_remove(context->context, context->db, 0, source); return ret; } /* * Pre-check that the transaction will succeed. * * Note that rename doesn't work to swap a principal's canonical * name with one of its aliases. To make that work would require * adding an hdb_rename() method for renaming principals (there's an * hdb_rename() method already, but for renaming the HDB), which is * ETOOMUCHWORK for the time being. */ ret = context->db->hdb_store(context->context, context->db, HDB_F_PRECHECK, &ent); if (ret == 0) ret = context->db->hdb_remove(context->context, context->db, HDB_F_PRECHECK, source); if (ret) return ret; sp = krb5_storage_emem(); krb5_data_zero(&value); if (sp == NULL) ret = ENOMEM; if (ret == 0) ret = kadm5_log_preamble(context, sp, kadm_rename, log_context->version + 1); if (ret == 0) ret = hdb_entry2value(context->context, entry, &value); if (ret) { krb5_data_free(&value); krb5_storage_free(sp); return ret; } /* * Write a zero length which we'll overwrite once we know the length of the * payload. */ off = krb5_storage_seek(sp, 0, SEEK_CUR); if (off == -1) ret = errno; if (ret == 0) ret = krb5_store_uint32(sp, 0); if (ret == 0) ret = krb5_store_principal(sp, source); if (ret == 0) { errno = 0; if (krb5_storage_write(sp, value.data, value.length) != (krb5_ssize_t)value.length) ret = errno ? errno : EIO; } if (ret == 0) { end_off = krb5_storage_seek(sp, 0, SEEK_CUR); if (end_off == -1) ret = errno; else if (end_off < off) ret = KADM5_LOG_CORRUPT; } if (ret == 0) { /* We wrote sizeof(uint32_t) + payload length bytes */ len = (uint32_t)(end_off - off); if (end_off - off != len || len < sizeof(len)) ret = KADM5_LOG_CORRUPT; else len -= sizeof(len); if (ret == 0 && krb5_storage_seek(sp, off, SEEK_SET) == -1) ret = errno; if (ret == 0) ret = krb5_store_uint32(sp, len); if (ret == 0 && krb5_storage_seek(sp, end_off, SEEK_SET) == -1) ret = errno; if (ret == 0) ret = krb5_store_uint32(sp, len); if (ret == 0) ret = kadm5_log_postamble(log_context, sp, log_context->version + 1); if (ret == 0) ret = kadm5_log_flush(context, sp); if (ret == 0) ret = kadm5_log_recover(context, kadm_recover_commit); } krb5_data_free(&value); krb5_storage_free(sp); return ret; } /* * Read a `rename' log operation from `sp' and apply it. */ static kadm5_ret_t kadm5_log_replay_rename(kadm5_server_context *context, uint32_t ver, uint32_t len, krb5_storage *sp) { krb5_error_code ret; krb5_principal source; hdb_entry_ex target_ent; krb5_data value; off_t off; size_t princ_len, data_len; memset(&target_ent, 0, sizeof(target_ent)); off = krb5_storage_seek(sp, 0, SEEK_CUR); ret = krb5_ret_principal(sp, &source); if (ret) { krb5_set_error_message(context->context, ret, "Failed to read renamed " "principal in log, version: %ld", (long)ver); return ret; } princ_len = krb5_storage_seek(sp, 0, SEEK_CUR) - off; data_len = len - princ_len; ret = krb5_data_alloc(&value, data_len); if (ret) { krb5_free_principal (context->context, source); return ret; } krb5_storage_read(sp, value.data, data_len); ret = hdb_value2entry(context->context, &value, &target_ent.entry); krb5_data_free(&value); if (ret) { krb5_free_principal(context->context, source); return ret; } ret = context->db->hdb_store(context->context, context->db, 0, &target_ent); hdb_free_entry(context->context, &target_ent); if (ret) { krb5_free_principal(context->context, source); return ret; } ret = context->db->hdb_remove(context->context, context->db, 0, source); krb5_free_principal(context->context, source); return ret; } /* * Add a `modify' operation to the log. */ kadm5_ret_t kadm5_log_modify(kadm5_server_context *context, hdb_entry *entry, uint32_t mask) { krb5_storage *sp; kadm5_ret_t ret; krb5_data value; uint32_t len; hdb_entry_ex ent; kadm5_log_context *log_context = &context->log_context; memset(&ent, 0, sizeof(ent)); ent.ctx = 0; ent.free_entry = 0; ent.entry = *entry; if (strcmp(log_context->log_file, "/dev/null") == 0) return context->db->hdb_store(context->context, context->db, HDB_F_REPLACE, &ent); ret = context->db->hdb_store(context->context, context->db, HDB_F_PRECHECK | HDB_F_REPLACE, &ent); if (ret) return ret; sp = krb5_storage_emem(); krb5_data_zero(&value); if (sp == NULL) ret = ENOMEM; if (ret == 0) ret = hdb_entry2value(context->context, entry, &value); if (ret) { krb5_data_free(&value); krb5_storage_free(sp); return ret; } len = value.length + sizeof(len); if (value.length > len || len > INT32_MAX) ret = E2BIG; if (ret == 0) ret = kadm5_log_preamble(context, sp, kadm_modify, log_context->version + 1); if (ret == 0) ret = krb5_store_uint32(sp, len); if (ret == 0) ret = krb5_store_uint32(sp, mask); if (ret == 0) { if (krb5_storage_write(sp, value.data, value.length) != (krb5_ssize_t)value.length) ret = errno; } if (ret == 0) ret = krb5_store_uint32(sp, len); if (ret == 0) ret = kadm5_log_postamble(log_context, sp, log_context->version + 1); if (ret == 0) ret = kadm5_log_flush(context, sp); if (ret == 0) ret = kadm5_log_recover(context, kadm_recover_commit); krb5_data_free(&value); krb5_storage_free(sp); return ret; } /* * Read a `modify' log operation from `sp' and apply it. */ static kadm5_ret_t kadm5_log_replay_modify(kadm5_server_context *context, uint32_t ver, uint32_t len, krb5_storage *sp) { krb5_error_code ret; uint32_t mask; krb5_data value; hdb_entry_ex ent, log_ent; memset(&log_ent, 0, sizeof(log_ent)); ret = krb5_ret_uint32(sp, &mask); if (ret) return ret; len -= 4; ret = krb5_data_alloc (&value, len); if (ret) { krb5_set_error_message(context->context, ret, "out of memory"); return ret; } errno = 0; if (krb5_storage_read (sp, value.data, len) != (krb5_ssize_t)len) { ret = errno ? errno : EIO; return ret; } ret = hdb_value2entry (context->context, &value, &log_ent.entry); krb5_data_free(&value); if (ret) return ret; memset(&ent, 0, sizeof(ent)); ret = context->db->hdb_fetch_kvno(context->context, context->db, log_ent.entry.principal, HDB_F_DECRYPT|HDB_F_ALL_KVNOS| HDB_F_GET_ANY|HDB_F_ADMIN_DATA, 0, &ent); if (ret) goto out; if (mask & KADM5_PRINC_EXPIRE_TIME) { if (log_ent.entry.valid_end == NULL) { ent.entry.valid_end = NULL; } else { if (ent.entry.valid_end == NULL) { ent.entry.valid_end = malloc(sizeof(*ent.entry.valid_end)); if (ent.entry.valid_end == NULL) { ret = ENOMEM; krb5_set_error_message(context->context, ret, "out of memory"); goto out; } } *ent.entry.valid_end = *log_ent.entry.valid_end; } } if (mask & KADM5_PW_EXPIRATION) { if (log_ent.entry.pw_end == NULL) { ent.entry.pw_end = NULL; } else { if (ent.entry.pw_end == NULL) { ent.entry.pw_end = malloc(sizeof(*ent.entry.pw_end)); if (ent.entry.pw_end == NULL) { ret = ENOMEM; krb5_set_error_message(context->context, ret, "out of memory"); goto out; } } *ent.entry.pw_end = *log_ent.entry.pw_end; } } if (mask & KADM5_LAST_PWD_CHANGE) { krb5_warnx (context->context, "Unimplemented mask KADM5_LAST_PWD_CHANGE"); } if (mask & KADM5_ATTRIBUTES) { ent.entry.flags = log_ent.entry.flags; } if (mask & KADM5_MAX_LIFE) { if (log_ent.entry.max_life == NULL) { ent.entry.max_life = NULL; } else { if (ent.entry.max_life == NULL) { ent.entry.max_life = malloc (sizeof(*ent.entry.max_life)); if (ent.entry.max_life == NULL) { ret = ENOMEM; krb5_set_error_message(context->context, ret, "out of memory"); goto out; } } *ent.entry.max_life = *log_ent.entry.max_life; } } if ((mask & KADM5_MOD_TIME) && (mask & KADM5_MOD_NAME)) { if (ent.entry.modified_by == NULL) { ent.entry.modified_by = malloc(sizeof(*ent.entry.modified_by)); if (ent.entry.modified_by == NULL) { ret = ENOMEM; krb5_set_error_message(context->context, ret, "out of memory"); goto out; } } else free_Event(ent.entry.modified_by); ret = copy_Event(log_ent.entry.modified_by, ent.entry.modified_by); if (ret) { krb5_set_error_message(context->context, ret, "out of memory"); goto out; } } if (mask & KADM5_KVNO) { ent.entry.kvno = log_ent.entry.kvno; } if (mask & KADM5_MKVNO) { krb5_warnx(context->context, "Unimplemented mask KADM5_KVNO"); } if (mask & KADM5_AUX_ATTRIBUTES) { krb5_warnx(context->context, "Unimplemented mask KADM5_AUX_ATTRIBUTES"); } if (mask & KADM5_POLICY_CLR) { krb5_warnx(context->context, "Unimplemented mask KADM5_POLICY_CLR"); } if (mask & KADM5_MAX_RLIFE) { if (log_ent.entry.max_renew == NULL) { ent.entry.max_renew = NULL; } else { if (ent.entry.max_renew == NULL) { ent.entry.max_renew = malloc (sizeof(*ent.entry.max_renew)); if (ent.entry.max_renew == NULL) { ret = ENOMEM; krb5_set_error_message(context->context, ret, "out of memory"); goto out; } } *ent.entry.max_renew = *log_ent.entry.max_renew; } } if (mask & KADM5_LAST_SUCCESS) { krb5_warnx(context->context, "Unimplemented mask KADM5_LAST_SUCCESS"); } if (mask & KADM5_LAST_FAILED) { krb5_warnx(context->context, "Unimplemented mask KADM5_LAST_FAILED"); } if (mask & KADM5_FAIL_AUTH_COUNT) { krb5_warnx(context->context, "Unimplemented mask KADM5_FAIL_AUTH_COUNT"); } if (mask & KADM5_KEY_DATA) { size_t num; size_t i; /* * We don't need to do anything about key history here because * the log entry contains a complete entry, including hdb * extensions. We do need to make sure that KADM5_TL_DATA is in * the mask though, since that's what it takes to update the * extensions (see below). */ mask |= KADM5_TL_DATA; for (i = 0; i < ent.entry.keys.len; ++i) free_Key(&ent.entry.keys.val[i]); free (ent.entry.keys.val); num = log_ent.entry.keys.len; ent.entry.keys.len = num; ent.entry.keys.val = malloc(len * sizeof(*ent.entry.keys.val)); if (ent.entry.keys.val == NULL) { krb5_set_error_message(context->context, ENOMEM, "out of memory"); ret = ENOMEM; goto out; } for (i = 0; i < ent.entry.keys.len; ++i) { ret = copy_Key(&log_ent.entry.keys.val[i], &ent.entry.keys.val[i]); if (ret) { krb5_set_error_message(context->context, ret, "out of memory"); goto out; } } } if ((mask & KADM5_TL_DATA) && log_ent.entry.extensions) { HDB_extensions *es = ent.entry.extensions; ent.entry.extensions = calloc(1, sizeof(*ent.entry.extensions)); if (ent.entry.extensions == NULL) goto out; ret = copy_HDB_extensions(log_ent.entry.extensions, ent.entry.extensions); if (ret) { krb5_set_error_message(context->context, ret, "out of memory"); free(ent.entry.extensions); ent.entry.extensions = es; goto out; } if (es) { free_HDB_extensions(es); free(es); } } ret = context->db->hdb_store(context->context, context->db, HDB_F_REPLACE, &ent); out: hdb_free_entry(context->context, &ent); hdb_free_entry(context->context, &log_ent); return ret; } /* * Update the first entry (which should be a `nop'), the "uber-entry". */ static kadm5_ret_t log_update_uber(kadm5_server_context *context, off_t off) { kadm5_log_context *log_context = &context->log_context; kadm5_ret_t ret = 0; krb5_storage *sp, *mem_sp; krb5_data data; uint32_t op, len; ssize_t bytes; if (strcmp(log_context->log_file, "/dev/null") == 0) return 0; if (log_context->read_only) return EROFS; krb5_data_zero(&data); mem_sp = krb5_storage_emem(); if (mem_sp == NULL) return ENOMEM; sp = krb5_storage_from_fd(log_context->log_fd); if (sp == NULL) { krb5_storage_free(mem_sp); return ENOMEM; } /* Skip first entry's version and timestamp */ if (krb5_storage_seek(sp, 8, SEEK_SET) == -1) { ret = errno; goto out; } /* If the first entry is not a nop, there's nothing we can do here */ ret = krb5_ret_uint32(sp, &op); if (ret || op != kadm_nop) goto out; /* If the first entry is not a 16-byte nop, ditto */ ret = krb5_ret_uint32(sp, &len); if (ret || len != LOG_UBER_LEN) goto out; /* * Try to make the writes here as close to atomic as possible: a * single write() call. */ ret = krb5_store_uint64(mem_sp, off); if (ret) goto out; ret = krb5_store_uint32(mem_sp, log_context->last_time); if (ret) goto out; ret = krb5_store_uint32(mem_sp, log_context->version); if (ret) goto out; krb5_storage_to_data(mem_sp, &data); bytes = krb5_storage_write(sp, data.data, data.length); if (bytes < 0) ret = errno; else if (bytes != data.length) ret = EIO; /* * We don't fsync() this write because we can recover if the write * doesn't complete, though for now we don't have code for properly * dealing with the offset not getting written completely. * * We should probably have two copies of the offset so we can use * one copy to verify the other, and when they don't match we could * traverse the whole log forwards, replaying just the last entry. */ out: if (ret == 0) kadm5_log_signal_master(context); krb5_data_free(&data); krb5_storage_free(sp); krb5_storage_free(mem_sp); if (lseek(log_context->log_fd, off, SEEK_SET) == -1) ret = ret ? ret : errno; return ret; } /* * Add a `nop' operation to the log. Does not close the log. */ kadm5_ret_t kadm5_log_nop(kadm5_server_context *context, enum kadm_nop_type nop_type) { krb5_storage *sp; kadm5_ret_t ret; kadm5_log_context *log_context = &context->log_context; off_t off; uint32_t vno = log_context->version; if (strcmp(log_context->log_file, "/dev/null") == 0) return 0; off = lseek(log_context->log_fd, 0, SEEK_CUR); if (off == -1) return errno; sp = krb5_storage_emem(); ret = kadm5_log_preamble(context, sp, kadm_nop, off == 0 ? 0 : vno + 1); if (ret) goto out; if (off == 0) { /* * First entry (uber-entry) gets room for offset of next new * entry and time and version of last entry. */ ret = krb5_store_uint32(sp, LOG_UBER_LEN); /* These get overwritten with the same values below */ if (ret == 0) ret = krb5_store_uint64(sp, LOG_UBER_SZ); if (ret == 0) ret = krb5_store_uint32(sp, log_context->last_time); if (ret == 0) ret = krb5_store_uint32(sp, vno); if (ret == 0) ret = krb5_store_uint32(sp, LOG_UBER_LEN); } else if (nop_type == kadm_nop_plain) { ret = krb5_store_uint32(sp, 0); if (ret == 0) ret = krb5_store_uint32(sp, 0); } else { ret = krb5_store_uint32(sp, sizeof(uint32_t)); if (ret == 0) ret = krb5_store_uint32(sp, nop_type); if (ret == 0) ret = krb5_store_uint32(sp, sizeof(uint32_t)); } if (ret == 0) ret = kadm5_log_postamble(log_context, sp, off == 0 ? 0 : vno + 1); if (ret == 0) ret = kadm5_log_flush(context, sp); if (ret == 0 && off == 0 && nop_type != kadm_nop_plain) ret = kadm5_log_nop(context, nop_type); if (ret == 0 && off != 0) ret = kadm5_log_recover(context, kadm_recover_commit); out: krb5_storage_free(sp); return ret; } /* * Read a `nop' log operation from `sp' and "apply" it (there's nothing * to do). * * FIXME Actually, if the nop payload is 4 bytes and contains an enum * kadm_nop_type value of kadm_nop_trunc then we should truncate the * log, and if it contains a kadm_nop_close then we should rename a new * log into place. However, this is not implemented yet. */ static kadm5_ret_t kadm5_log_replay_nop(kadm5_server_context *context, uint32_t ver, uint32_t len, krb5_storage *sp) { return 0; } struct replay_cb_data { size_t count; uint32_t ver; enum kadm_recover_mode mode; }; /* * Recover or perform the initial commit of an unconfirmed log entry */ static kadm5_ret_t recover_replay(kadm5_server_context *context, uint32_t ver, time_t timestamp, enum kadm_ops op, uint32_t len, krb5_storage *sp, void *ctx) { struct replay_cb_data *data = ctx; kadm5_ret_t ret; off_t off; /* On initial commit there must be just one pending unconfirmed entry */ if (data->count > 0 && data->mode == kadm_recover_commit) return KADM5_LOG_CORRUPT; /* We're at the start of the payload; compute end of entry offset */ off = krb5_storage_seek(sp, 0, SEEK_CUR) + len + LOG_TRAILER_SZ; /* We cannot perform log recovery on LDAP and such backends */ if (data->mode == kadm_recover_replay && (context->db->hdb_capability_flags & HDB_CAP_F_SHARED_DIRECTORY)) ret = 0; else ret = kadm5_log_replay(context, op, ver, len, sp); switch (ret) { case HDB_ERR_NOENTRY: case HDB_ERR_EXISTS: if (data->mode != kadm_recover_replay) return ret; case 0: break; case KADM5_LOG_CORRUPT: return -1; default: krb5_warn(context->context, ret, "unexpected error while replaying"); return -1; } data->count++; data->ver = ver; /* * With replay we may be making multiple HDB changes. We must sync the * confirmation of each one before moving on to the next. Otherwise, we * might attempt to replay multiple already applied updates, and this may * introduce unintended intermediate states or fail to yield the same final * result. */ kadm5_log_set_version(context, ver); ret = log_update_uber(context, off); if (ret == 0 && data->mode != kadm_recover_commit) ret = krb5_storage_fsync(sp); return ret; } kadm5_ret_t kadm5_log_recover(kadm5_server_context *context, enum kadm_recover_mode mode) { kadm5_ret_t ret; krb5_storage *sp; struct replay_cb_data replay_data; replay_data.count = 0; replay_data.ver = 0; replay_data.mode = mode; sp = kadm5_log_goto_end(context, context->log_context.log_fd); if (sp == NULL) return errno ? errno : EIO; ret = kadm5_log_foreach(context, kadm_forward | kadm_unconfirmed, NULL, recover_replay, &replay_data); if (ret == 0 && mode == kadm_recover_commit && replay_data.count != 1) ret = KADM5_LOG_CORRUPT; krb5_storage_free(sp); return ret; } /* * Call `func' for each log record in the log in `context'. * * `func' is optional. * * If `func' returns -1 then log traversal terminates and this returns 0. * Otherwise `func''s return is returned if there are no other errors. */ kadm5_ret_t kadm5_log_foreach(kadm5_server_context *context, enum kadm_iter_opts iter_opts, off_t *off_lastp, kadm5_ret_t (*func)(kadm5_server_context *server_context, uint32_t ver, time_t timestamp, enum kadm_ops op, uint32_t len, krb5_storage *sp, void *ctx), void *ctx) { kadm5_ret_t ret = 0; int fd = context->log_context.log_fd; krb5_storage *sp; off_t off_last; off_t this_entry = 0; off_t log_end = 0; if (strcmp(context->log_context.log_file, "/dev/null") == 0) return 0; if (off_lastp == NULL) off_lastp = &off_last; *off_lastp = -1; if (((iter_opts & kadm_forward) && (iter_opts & kadm_backward)) || (!(iter_opts & kadm_confirmed) && !(iter_opts & kadm_unconfirmed))) return EINVAL; if ((iter_opts & kadm_forward) && (iter_opts & kadm_confirmed) && (iter_opts & kadm_unconfirmed)) { /* * We want to traverse all log entries, confirmed or not, from * the start, then there's no need to kadm5_log_goto_end() * -- no reason to try to find the end. */ sp = krb5_storage_from_fd(fd); if (sp == NULL) return errno; log_end = krb5_storage_seek(sp, 0, SEEK_END); if (log_end == -1 || krb5_storage_seek(sp, 0, SEEK_SET) == -1) { ret = errno; krb5_storage_free(sp); return ret; } } else { /* Get the end of the log based on the uber entry */ sp = kadm5_log_goto_end(context, fd); if (sp == NULL) return errno; log_end = krb5_storage_seek(sp, 0, SEEK_CUR); } *off_lastp = log_end; if ((iter_opts & kadm_forward) && (iter_opts & kadm_confirmed)) { /* Start at the beginning */ if (krb5_storage_seek(sp, 0, SEEK_SET) == -1) { ret = errno; krb5_storage_free(sp); return ret; } } else if ((iter_opts & kadm_backward) && (iter_opts & kadm_unconfirmed)) { /* * We're at the confirmed end but need to be at the unconfirmed * end. Skip forward to the real end, re-entering to do it. */ ret = kadm5_log_foreach(context, kadm_forward | kadm_unconfirmed, &log_end, NULL, NULL); if (ret) return ret; if (krb5_storage_seek(sp, log_end, SEEK_SET) == -1) { ret = errno; krb5_storage_free(sp); return ret; } } for (;;) { uint32_t ver, ver2, len, len2; uint32_t tstamp; time_t timestamp; enum kadm_ops op; if ((iter_opts & kadm_backward)) { off_t o; o = krb5_storage_seek(sp, 0, SEEK_CUR); if (o == 0 || ((iter_opts & kadm_unconfirmed) && o <= *off_lastp)) break; ret = kadm5_log_previous(context->context, sp, &ver, ×tamp, &op, &len); if (ret) break; /* Offset is now at payload of current entry */ o = krb5_storage_seek(sp, 0, SEEK_CUR); if (o == -1) { ret = errno; break; } this_entry = o - LOG_HEADER_SZ; if (this_entry < 0) { ret = KADM5_LOG_CORRUPT; break; } } else { /* Offset is now at start of current entry, read header */ this_entry = krb5_storage_seek(sp, 0, SEEK_CUR); if (!(iter_opts & kadm_unconfirmed) && this_entry == log_end) break; ret = get_header(sp, LOG_NOPEEK, &ver, &tstamp, &op, &len); if (ret == HEIM_ERR_EOF) { ret = 0; break; } timestamp = tstamp; if (ret) break; /* Offset is now at payload of current entry */ } /* Validate trailer before calling the callback */ if (krb5_storage_seek(sp, len, SEEK_CUR) == -1) { ret = errno; break; } ret = krb5_ret_uint32(sp, &len2); if (ret) break; ret = krb5_ret_uint32(sp, &ver2); if (ret) break; if (len != len2 || ver != ver2) { ret = KADM5_LOG_CORRUPT; break; } /* Rewind to start of payload and call callback if we have one */ if (krb5_storage_seek(sp, this_entry + LOG_HEADER_SZ, SEEK_SET) == -1) { ret = errno; break; } if (func != NULL) { ret = (*func)(context, ver, timestamp, op, len, sp, ctx); if (ret) { /* Callback signals desire to stop by returning -1 */ if (ret == -1) ret = 0; break; } } if ((iter_opts & kadm_forward)) { off_t o; o = krb5_storage_seek(sp, this_entry+LOG_WRAPPER_SZ+len, SEEK_SET); if (o == -1) { ret = errno; break; } if (o > log_end) *off_lastp = o; } else if ((iter_opts & kadm_backward)) { /* * Rewind to the start of this entry so kadm5_log_previous() * can find the previous one. */ if (krb5_storage_seek(sp, this_entry, SEEK_SET) == -1) { ret = errno; break; } } } if ((ret == HEIM_ERR_EOF || ret == KADM5_LOG_CORRUPT) && (iter_opts & kadm_forward) && context->log_context.lock_mode == LOCK_EX) { /* * Truncate partially written last log entry so we can write * again. */ ret = krb5_storage_truncate(sp, this_entry); if (ret == 0 && krb5_storage_seek(sp, this_entry, SEEK_SET) == -1) ret = errno; krb5_warnx(context->context, "Truncating log at partial or " "corrupt %s entry", this_entry > log_end ? "unconfirmed" : "confirmed"); } krb5_storage_free(sp); return ret; } /* * Go to the second record, which, if we have an uber record, will be * the first record. */ static krb5_storage * log_goto_first(kadm5_server_context *server_context, int fd) { krb5_storage *sp; enum kadm_ops op; uint32_t ver, len; kadm5_ret_t ret; if (fd == -1) { errno = EINVAL; return NULL; } sp = krb5_storage_from_fd(fd); if (sp == NULL) return NULL; if (krb5_storage_seek(sp, 0, SEEK_SET) == -1) return NULL; ret = get_header(sp, LOG_DOPEEK, &ver, NULL, &op, &len); if (ret) { krb5_storage_free(sp); errno = ret; return NULL; } if (op == kadm_nop && len == LOG_UBER_LEN && seek_next(sp) == -1) { krb5_storage_free(sp); return NULL; } return sp; } /* * Go to end of log. * * XXX This really needs to return a kadm5_ret_t and either output a * krb5_storage * via an argument, or take one as input. */ krb5_storage * kadm5_log_goto_end(kadm5_server_context *server_context, int fd) { krb5_error_code ret = 0; krb5_storage *sp; enum kadm_ops op; uint32_t ver, len; uint32_t tstamp; uint64_t off; if (fd == -1) { errno = EINVAL; return NULL; } sp = krb5_storage_from_fd(fd); if (sp == NULL) return NULL; if (krb5_storage_seek(sp, 0, SEEK_SET) == -1) { ret = errno; goto fail; } ret = get_header(sp, LOG_NOPEEK, &ver, &tstamp, &op, &len); if (ret == HEIM_ERR_EOF) { (void) krb5_storage_seek(sp, 0, SEEK_SET); return sp; } if (ret == KADM5_LOG_CORRUPT) goto truncate; if (ret) goto fail; if (op == kadm_nop && len == LOG_UBER_LEN) { /* New style log */ ret = krb5_ret_uint64(sp, &off); if (ret) goto truncate; if (krb5_storage_seek(sp, off, SEEK_SET) == -1) goto fail; if (off >= LOG_UBER_SZ) { ret = get_version_prev(sp, &ver, NULL); if (ret == 0) return sp; } /* Invalid offset in uber entry */ goto truncate; } /* Old log with no uber entry */ if (krb5_storage_seek(sp, 0, SEEK_END) == -1) { static int warned = 0; if (!warned) { warned = 1; krb5_warnx(server_context->context, "Old log found; truncate it to upgrade"); } } ret = get_version_prev(sp, &ver, NULL); if (ret) goto truncate; return sp; truncate: /* If we can, truncate */ if (server_context->log_context.lock_mode == LOCK_EX) { ret = kadm5_log_reinit(server_context, 0); if (ret == 0) { krb5_warn(server_context->context, ret, "Invalid log; truncating to recover"); if (krb5_storage_seek(sp, 0, SEEK_END) == -1) return NULL; return sp; } } krb5_warn(server_context->context, ret, "Invalid log; truncate to recover"); fail: errno = ret; krb5_storage_free(sp); return NULL; } /* * Return previous log entry. * * The pointer in `sp' is assumed to be at the top of the entry after * previous entry (e.g., at EOF). On success, the `sp' pointer is set to * data portion of previous entry. In case of error, it's not changed * at all. */ kadm5_ret_t kadm5_log_previous(krb5_context context, krb5_storage *sp, uint32_t *verp, time_t *tstampp, enum kadm_ops *opp, uint32_t *lenp) { krb5_error_code ret; off_t oldoff; uint32_t ver2, len2; uint32_t tstamp; oldoff = krb5_storage_seek(sp, 0, SEEK_CUR); if (oldoff == -1) goto log_corrupt; /* This reads the physical version of the uber record */ if (seek_prev(sp, verp, lenp) == -1) goto log_corrupt; ret = get_header(sp, LOG_NOPEEK, &ver2, &tstamp, opp, &len2); if (ret) { (void) krb5_storage_seek(sp, oldoff, SEEK_SET); return ret; } if (tstampp) *tstampp = tstamp; if (ver2 != *verp || len2 != *lenp) goto log_corrupt; return 0; log_corrupt: (void) krb5_storage_seek(sp, oldoff, SEEK_SET); return KADM5_LOG_CORRUPT; } /* * Replay a record from the log */ kadm5_ret_t kadm5_log_replay(kadm5_server_context *context, enum kadm_ops op, uint32_t ver, uint32_t len, krb5_storage *sp) { switch (op) { case kadm_create : return kadm5_log_replay_create(context, ver, len, sp); case kadm_delete : return kadm5_log_replay_delete(context, ver, len, sp); case kadm_rename : return kadm5_log_replay_rename(context, ver, len, sp); case kadm_modify : return kadm5_log_replay_modify(context, ver, len, sp); case kadm_nop : return kadm5_log_replay_nop(context, ver, len, sp); default : /* * FIXME This default arm makes it difficult to add new kadm_ops * values. */ krb5_set_error_message(context->context, KADM5_FAILURE, "Unsupported replay op %d", (int)op); (void) krb5_storage_seek(sp, len, SEEK_CUR); return KADM5_FAILURE; } } struct load_entries_data { krb5_data *entries; unsigned char *p; uint32_t first; uint32_t last; size_t bytes; size_t nentries; size_t maxbytes; size_t maxentries; }; /* * Prepend one entry with header and trailer to the entry buffer, stopping when * we've reached either of the byte or entry-count limits (if non-zero). * * This is a two-pass algorithm: * * In the first pass, when entries->entries == NULL, we compute the space * required, and count the entries that fit up from zero. * * In the second pass we fill the buffer, and count the entries back down to * zero. The space used must be an exact fit, and the number of entries must * reach zero at that point or an error is returned. * * The caller MUST check that entries->nentries == 0 at the end of the second * pass. */ static kadm5_ret_t load_entries_cb(kadm5_server_context *server_context, uint32_t ver, time_t timestamp, enum kadm_ops op, uint32_t len, krb5_storage *sp, void *ctx) { struct load_entries_data *entries = ctx; kadm5_ret_t ret; ssize_t bytes; size_t entry_len = len + LOG_WRAPPER_SZ; unsigned char *base; if (entries->entries == NULL) { size_t total = entries->bytes + entry_len; /* * First run: find the size of krb5_data buffer needed. * * If the log was huge we'd have to perhaps open a temp file for this. * For now KISS. */ if ((op == kadm_nop && entry_len == LOG_UBER_SZ) || entry_len < len /*overflow?*/ || (entries->maxbytes > 0 && total > entries->maxbytes) || total < entries->bytes /*overflow?*/ || (entries->maxentries > 0 && entries->nentries == entries->maxentries)) return -1; /* stop iteration */ entries->bytes = total; entries->first = ver; if (entries->nentries++ == 0) entries->last = ver; return 0; } /* Second run: load the data into memory */ base = (unsigned char *)entries->entries->data; if (entries->p - base < entry_len && entries->p != base) { /* * This can't happen normally: we stop the log record iteration * above before we get here. This could happen if someone wrote * garbage to the log while we were traversing it. We return an * error instead of asserting. */ return KADM5_LOG_CORRUPT; } /* * sp here is a krb5_storage_from_fd() of the log file, and the * offset pointer points at the current log record payload. * * Seek back to the start of the record poayload so we can read the * whole record. */ if (krb5_storage_seek(sp, -LOG_HEADER_SZ, SEEK_CUR) == -1) return errno; /* * We read the header, payload, and trailer into the buffer we have, that * many bytes before the previous record we read. */ errno = 0; bytes = krb5_storage_read(sp, entries->p - entry_len, entry_len); ret = errno; if (bytes < 0 || bytes != entry_len) return ret ? ret : EIO; entries->first = ver; --entries->nentries; entries->p -= entry_len; return (entries->p == base) ? -1 : 0; } /* * Serialize a tail fragment of the log as a krb5_data, this is constrained to * at most `maxbytes' bytes and to at most `maxentries' entries if not zero. */ static kadm5_ret_t load_entries(kadm5_server_context *context, krb5_data *p, size_t maxentries, size_t maxbytes, uint32_t *first, uint32_t *last) { struct load_entries_data entries; kadm5_ret_t ret; unsigned char *base; krb5_data_zero(p); *first = 0; memset(&entries, 0, sizeof(entries)); entries.entries = NULL; entries.p = NULL; entries.maxentries = maxentries; entries.maxbytes = maxbytes; /* Figure out how many bytes it will take */ ret = kadm5_log_foreach(context, kadm_backward | kadm_confirmed, NULL, load_entries_cb, &entries); if (ret) return ret; /* * If no entries fit our limits, we do not truncate, instead the caller can * call kadm5_log_reinit() if desired. */ if (entries.bytes == 0) return 0; ret = krb5_data_alloc(p, entries.bytes); if (ret) return ret; *first = entries.first; *last = entries.last; entries.entries = p; base = (unsigned char *)entries.entries->data; entries.p = base + entries.bytes; ret = kadm5_log_foreach(context, kadm_backward | kadm_confirmed, NULL, load_entries_cb, &entries); if (ret == 0 && (entries.nentries || entries.p != base || entries.first != *first)) ret = KADM5_LOG_CORRUPT; if (ret) krb5_data_free(p); return ret; } /* * Truncate the log, retaining at most `keep' entries and at most `maxbytes'. * If `maxbytes' is zero, keep at most the default log size limit. */ kadm5_ret_t kadm5_log_truncate(kadm5_server_context *context, size_t keep, size_t maxbytes) { kadm5_ret_t ret; uint32_t first, last, last_tstamp; time_t now = time(NULL); krb5_data entries; krb5_storage *sp; ssize_t bytes; uint64_t sz; off_t off; if (maxbytes == 0) maxbytes = get_max_log_size(context->context); if (strcmp(context->log_context.log_file, "/dev/null") == 0) return 0; if (context->log_context.read_only) return EROFS; /* Get the desired records. */ krb5_data_zero(&entries); ret = load_entries(context, &entries, keep, maxbytes, &first, &last); if (ret) return ret; if (first == 0) { /* * No records found/fit within resource limits. The caller should call * kadm5_log_reinit(context) to truly truncate and reset the log to * version 0, else call again with better limits. */ krb5_data_free(&entries); return EINVAL; } /* Check that entries.length won't overflow off_t */ sz = LOG_UBER_SZ + entries.length; off = (off_t)sz; if (off < 0 || off != sz || sz < entries.length) { krb5_data_free(&entries); return EOVERFLOW; /* caller should ask for fewer entries */ } /* Truncate to zero size and seek to zero offset */ if (ftruncate(context->log_context.log_fd, 0) < 0 || lseek(context->log_context.log_fd, 0, SEEK_SET) < 0) { krb5_data_free(&entries); return errno; } /* * Write the uber record and then the records loaded. Confirm the entries * after writing them. * * If we crash then the log may not have all the entries we want, and * replaying only some of the entries will leave us in a bad state. * Additionally, we don't have mathematical proof that replaying the last * N>1 entries is always idempotent. And though we believe we can make * such replays idempotent, they would still leave the HDB with * intermediate states that would not have occurred on the master. * * By initially setting the offset in the uber record to 0, the log will be * seen as invalid should we crash here, thus the only * harm will be that we'll reinitialize the log and force full props. * * We can't use the normal kadm5_log_*() machinery for this because * we must set specific version numbers and timestamps. To keep * things simple we don't try to do a single atomic write here as we * do in kadm5_log_flush(). * * We really do want to keep the new first entry's version and * timestamp so we don't trip up iprop. * * Keep this in sync with kadm5_log_nop(). */ sp = krb5_storage_from_fd(context->log_context.log_fd); if (sp == NULL) { ret = errno; krb5_warn(context->context, ret, "Unable to keep entries"); krb5_data_free(&entries); return errno; } ret = krb5_store_uint32(sp, 0); if (ret == 0) ret = krb5_store_uint32(sp, now); if (ret == 0) ret = krb5_store_uint32(sp, kadm_nop); /* end of preamble */ if (ret == 0) ret = krb5_store_uint32(sp, LOG_UBER_LEN); /* end of header */ if (ret == 0) ret = krb5_store_uint64(sp, LOG_UBER_SZ); if (ret == 0) ret = krb5_store_uint32(sp, now); if (ret == 0) ret = krb5_store_uint32(sp, last); if (ret == 0) ret = krb5_store_uint32(sp, LOG_UBER_LEN); if (ret == 0) ret = krb5_store_uint32(sp, 0); /* end of trailer */ if (ret == 0) { bytes = krb5_storage_write(sp, entries.data, entries.length); if (bytes == -1) ret = errno; } if (ret == 0) ret = krb5_storage_fsync(sp); /* Confirm all the records now */ if (ret == 0) { if (krb5_storage_seek(sp, LOG_HEADER_SZ, SEEK_SET) == -1) ret = errno; } if (ret == 0) ret = krb5_store_uint64(sp, off); krb5_data_free(&entries); krb5_storage_free(sp); if (ret) { krb5_warn(context->context, ret, "Unable to keep entries"); (void) ftruncate(context->log_context.log_fd, LOG_UBER_SZ); (void) lseek(context->log_context.log_fd, 0, SEEK_SET); return ret; } /* Done. Now rebuild the log_context state. */ (void) lseek(context->log_context.log_fd, off, SEEK_SET); sp = kadm5_log_goto_end(context, context->log_context.log_fd); if (sp == NULL) return ENOMEM; ret = get_version_prev(sp, &context->log_context.version, &last_tstamp); context->log_context.last_time = last_tstamp; krb5_storage_free(sp); return ret; } /* * "Truncate" the log if not read only and over the desired maximum size. We * attempt to retain 1/4 of the existing storage. * * Called after successful log recovery, so at this point we must have no * unconfirmed entries in the log. */ static kadm5_ret_t truncate_if_needed(kadm5_server_context *context) { kadm5_ret_t ret = 0; kadm5_log_context *log_context = &context->log_context; size_t maxbytes; struct stat st; if (log_context->log_fd == -1 || log_context->read_only) return 0; if (strcmp(context->log_context.log_file, "/dev/null") == 0) return 0; maxbytes = get_max_log_size(context->context); if (maxbytes <= 0) return 0; if (fstat(log_context->log_fd, &st) == -1) return errno; if (st.st_size == (size_t)st.st_size && (size_t)st.st_size <= maxbytes) return 0; /* Shrink the log by a factor of 4 */ ret = kadm5_log_truncate(context, 0, maxbytes/4); return ret == EINVAL ? 0 : ret; } #ifndef NO_UNIX_SOCKETS static char *default_signal = NULL; static HEIMDAL_MUTEX signal_mutex = HEIMDAL_MUTEX_INITIALIZER; const char * kadm5_log_signal_socket(krb5_context context) { int ret = 0; HEIMDAL_MUTEX_lock(&signal_mutex); if (!default_signal) ret = asprintf(&default_signal, "%s/signal", hdb_db_dir(context)); if (ret == -1) default_signal = NULL; HEIMDAL_MUTEX_unlock(&signal_mutex); return krb5_config_get_string_default(context, NULL, default_signal, "kdc", "signal_socket", NULL); } #else /* NO_UNIX_SOCKETS */ #define SIGNAL_SOCKET_HOST "127.0.0.1" #define SIGNAL_SOCKET_PORT "12701" kadm5_ret_t kadm5_log_signal_socket_info(krb5_context context, int server_end, struct addrinfo **ret_addrs) { struct addrinfo hints; struct addrinfo *addrs = NULL; kadm5_ret_t ret = KADM5_FAILURE; int wsret; memset(&hints, 0, sizeof(hints)); hints.ai_flags = AI_NUMERICHOST; if (server_end) hints.ai_flags |= AI_PASSIVE; hints.ai_family = AF_INET; hints.ai_socktype = SOCK_STREAM; hints.ai_protocol = IPPROTO_TCP; wsret = getaddrinfo(SIGNAL_SOCKET_HOST, SIGNAL_SOCKET_PORT, &hints, &addrs); if (wsret != 0) { krb5_set_error_message(context, KADM5_FAILURE, "%s", gai_strerror(wsret)); goto done; } if (addrs == NULL) { krb5_set_error_message(context, KADM5_FAILURE, "getaddrinfo() failed to return address list"); goto done; } *ret_addrs = addrs; addrs = NULL; ret = 0; done: if (addrs) freeaddrinfo(addrs); return ret; } #endif