/* $Id: imx23_icoll.c,v 1.3 2014/02/25 08:39:39 martin Exp $ */ /* * Copyright (c) 2012 The NetBSD Foundation, Inc. * All rights reserved. * * This code is derived from software contributed to The NetBSD Foundation * by Petri Laakso. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE * POSSIBILITY OF SUCH DAMAGE. */ #include #include #include #include #include #include #include #define _INTR_PRIVATE #include #include #include #define ICOLL_SOFT_RST_LOOP 455 /* At least 1 us ... */ #define ICOLL_READ(sc, reg) \ bus_space_read_4(sc->sc_iot, sc->sc_hdl, (reg)) #define ICOLL_WRITE(sc, reg, val) \ bus_space_write_4(sc->sc_iot, sc->sc_hdl, (reg), (val)) #define ICOLL_IRQ_REG_SIZE 0x10 #define ICOLL_CLR_IRQ(sc, irq) \ ICOLL_WRITE(sc, HW_ICOLL_INTERRUPT0_CLR + \ (irq) * ICOLL_IRQ_REG_SIZE, \ HW_ICOLL_INTERRUPT_ENABLE) #define ICOLL_SET_IRQ(sc, irq) \ ICOLL_WRITE(sc, HW_ICOLL_INTERRUPT0_SET + \ (irq) * ICOLL_IRQ_REG_SIZE, \ HW_ICOLL_INTERRUPT_ENABLE) #define ICOLL_GET_PRIO(sc, irq) \ __SHIFTOUT(ICOLL_READ(sc, HW_ICOLL_INTERRUPT0 + \ (irq) * ICOLL_IRQ_REG_SIZE), \ HW_ICOLL_INTERRUPT_PRIORITY) #define PICTOSOFTC(pic) \ ((struct icoll_softc *)((char *)(pic) - \ offsetof(struct icoll_softc, sc_pic))) /* * pic callbacks. */ static void icoll_unblock_irqs(struct pic_softc *, size_t, uint32_t); static void icoll_block_irqs(struct pic_softc *, size_t, uint32_t); static int icoll_find_pending_irqs(struct pic_softc *); static void icoll_establish_irq(struct pic_softc *, struct intrsource *); static void icoll_source_name(struct pic_softc *, int, char *, size_t); static void icoll_set_priority(struct pic_softc *, int); /* * autoconf(9) callbacks. */ static int icoll_match(device_t, cfdata_t, void *); static void icoll_attach(device_t, device_t, void *); static int icoll_activate(device_t, enum devact); /* * ARM interrupt handler. */ void imx23_intr_dispatch(struct clockframe *); const static struct pic_ops icoll_pic_ops = { .pic_unblock_irqs = icoll_unblock_irqs, .pic_block_irqs = icoll_block_irqs, .pic_find_pending_irqs = icoll_find_pending_irqs, .pic_establish_irq = icoll_establish_irq, .pic_source_name = icoll_source_name, .pic_set_priority = icoll_set_priority }; struct icoll_softc { device_t sc_dev; struct pic_softc sc_pic; bus_space_tag_t sc_iot; bus_space_handle_t sc_hdl; }; /* For IRQ handler. */ static struct icoll_softc *icoll_sc; /* * Private to driver. */ static void icoll_reset(struct icoll_softc *); CFATTACH_DECL3_NEW(icoll, sizeof(struct icoll_softc), icoll_match, icoll_attach, NULL, icoll_activate, NULL, NULL, 0); /* * ARM interrupt handler. */ void imx23_intr_dispatch(struct clockframe *frame) { struct cpu_info * const ci = curcpu(); struct pic_softc *pic_sc; int saved_spl; uint8_t irq; uint8_t prio; pic_sc = &icoll_sc->sc_pic; ci->ci_data.cpu_nintr++; /* Save current spl. */ saved_spl = curcpl(); /* IRQ to be handled. */ irq = __SHIFTOUT(ICOLL_READ(icoll_sc, HW_ICOLL_STAT), HW_ICOLL_STAT_VECTOR_NUMBER); /* Save IRQ's priority. Acknowledge it later. */ prio = ICOLL_GET_PRIO(icoll_sc, irq); /* * Notify ICOLL to deassert IRQ before re-enabling the IRQ's. * This is done by writing anything to HW_ICOLL_VECTOR. */ ICOLL_WRITE(icoll_sc, HW_ICOLL_VECTOR, __SHIFTIN(0x3fffffff, HW_ICOLL_VECTOR_IRQVECTOR)); /* Bogus IRQ. */ if (irq == 0x7f) { cpsie(I32_bit); ICOLL_WRITE(icoll_sc, HW_ICOLL_LEVELACK, (1<pic_sources[irq]->is_ipl > ci->ci_cpl) saved_spl = _splraise(pic_sc->pic_sources[irq]->is_ipl); /* Call the handler registered for the IRQ. */ cpsie(I32_bit); pic_dispatch(pic_sc->pic_sources[irq], frame); /* * Acknowledge the IRQ by writing its priority to HW_ICOLL_LEVELACK. * Interrupts should be enabled. */ ICOLL_WRITE(icoll_sc, HW_ICOLL_LEVELACK, (1<pic_maxsources; i++) { is = pic->pic_sources[i]; if (is == NULL) continue; if (is->is_ipl > newipl) ICOLL_SET_IRQ(sc, pic->pic_irqbase + is->is_irq); else ICOLL_CLR_IRQ(sc, pic->pic_irqbase + is->is_irq); } } /* * autoconf(9) callbacks. */ static int icoll_match(device_t parent, cfdata_t match, void *aux) { struct apb_attach_args *aa = aux; if ((aa->aa_addr == HW_ICOLL_BASE) && (aa->aa_size == HW_ICOLL_SIZE)) return 1; return 0; } static void icoll_attach(device_t parent, device_t self, void *aux) { static int icoll_attached = 0; struct icoll_softc *sc = device_private(self); struct apb_attach_args *aa = aux; if (icoll_attached) return; icoll_sc = sc; sc->sc_dev = self; sc->sc_iot = aa->aa_iot; sc->sc_pic.pic_maxsources = IRQ_LAST + 1; sc->sc_pic.pic_ops = &icoll_pic_ops; strlcpy(sc->sc_pic.pic_name, device_xname(self), sizeof(sc->sc_pic.pic_name)); if (bus_space_map(sc->sc_iot, aa->aa_addr, aa->aa_size, 0, &(sc->sc_hdl))) { aprint_error_dev(sc->sc_dev, "unable to map bus space\n"); return; } icoll_reset(sc); pic_add(&sc->sc_pic, 0); aprint_normal("\n"); icoll_attached = 1; return; } static int icoll_activate(device_t self, enum devact act) { return EOPNOTSUPP; } /* * Reset the ICOLL block. * * Inspired by i.MX23 RM "39.3.10 Correct Way to Soft Reset a Block" */ static void icoll_reset(struct icoll_softc *sc) { unsigned int loop; /* * Prepare for soft-reset by making sure that SFTRST is not currently * asserted. Also clear CLKGATE so we can wait for its assertion below. */ ICOLL_WRITE(sc, HW_ICOLL_CTRL_CLR, HW_ICOLL_CTRL_SFTRST); /* Wait at least a microsecond for SFTRST to deassert. */ loop = 0; while ((ICOLL_READ(sc, HW_ICOLL_CTRL) & HW_ICOLL_CTRL_SFTRST) || (loop < ICOLL_SOFT_RST_LOOP)) { loop++; } /* Clear CLKGATE so we can wait for its assertion below. */ ICOLL_WRITE(sc, HW_ICOLL_CTRL_CLR, HW_ICOLL_CTRL_CLKGATE); /* Soft-reset the block. */ ICOLL_WRITE(sc, HW_ICOLL_CTRL_SET, HW_ICOLL_CTRL_SFTRST); /* Wait until clock is in the gated state. */ while (!(ICOLL_READ(sc, HW_ICOLL_CTRL) & HW_ICOLL_CTRL_CLKGATE)); /* Bring block out of reset. */ ICOLL_WRITE(sc, HW_ICOLL_CTRL_CLR, HW_ICOLL_CTRL_SFTRST); loop = 0; while ((ICOLL_READ(sc, HW_ICOLL_CTRL) & HW_ICOLL_CTRL_SFTRST) || (loop < ICOLL_SOFT_RST_LOOP)) { loop++; } ICOLL_WRITE(sc, HW_ICOLL_CTRL_CLR, HW_ICOLL_CTRL_CLKGATE); /* Wait until clock is in the NON-gated state. */ while (ICOLL_READ(sc, HW_ICOLL_CTRL) & HW_ICOLL_CTRL_CLKGATE); return; }