/* $NetBSD: omap3_usbtllreg.h,v 1.2 2014/03/29 23:32:41 matt Exp $ */ /*- * Copyright (c) 2010 Jared D. McNeill * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. The name of the author may not be used to endorse or promote products * derived from this software without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. */ #ifndef _OMAP3_USBTLLREG_H #define _OMAP3_USBTLLREG_H /* 32-bit */ #define USBTLL_REVISION 0x00 #define USBTLL_REVISION_MAJOR(x) (((x) >> 4) & 0xf) #define USBTLL_REVISION_MINOR(x) ((x) & 0xf) #define USBTLL_HWINFO 0x04 #define USBTLL_HWINFO_SAR_CNTX_SIZE __BITS(7,0) #define USBTLL_SYSCONFIG 0x10 #define USBTLL_SYSCONFIG_CLOCKACTIVITY 0x00000100 #define USBTLL_SYSCONFIG_SIDLEMODE 0x00000018 #define USBTLL_SYSCONFIG_ENAWAKEUP 0x00000004 #define USBTLL_SYSCONFIG_SOFTRESET 0x00000002 #define USBTLL_SYSCONFIG_AUTOIDLE 0x00000001 #define USBTLL_SYSSTATUS 0x14 #define USBTLL_SYSSTATUS_RESETDONE 0x00000001 #define USBTLL_IRQSTATUS 0x18 #define USBTLL_IRQSTATUS_ACCESS_ERROR 0x00000004 #define USBTLL_IRQSTATUS_FCLK_END 0x00000002 #define USBTLL_IRQSTATUS_FCLK_START 0x00000001 #define USBTLL_IRQENABLE 0x1c #define USBTLL_IRQENABLE_ACCESS_ERROR_EN 0x00000004 #define USBTLL_IRQENABLE_FCLK_END_EN 0x00000002 #define USBTLL_IRQENABLE_FCLK_START_EN 0x00000001 #define USBTLL_SHARED_CONF 0x30 #define USBTLL_SHARED_CONF_USB_90D_DDR_EN 0x00000040 #define USBTLL_SHARED_CONF_USB_180D_SDR_EN 0x00000020 #define USBTLL_SHARED_CONF_USB_DIVRATIO 0x0000001c #define USBTLL_SHARED_CONF_FCLK_REQ 0x00000002 #define USBTLL_SHARED_CONF_FCLK_IS_ON 0x00000001 #define USBTLL_CHANNEL_CONF(i) (0x40 + (0x04 * (i))) #define USBTLL_CHANNEL_CONF_FSLSLINESTATE 0x30000000 #define USBTLL_CHANNEL_CONF_FSLSMODE 0x0f000000 #define USBTLL_CHANNEL_CONF_TESTTXSE0 0x00100000 #define USBTLL_CHANNEL_CONF_TESTTXDAT 0x00080000 #define USBTLL_CHANNEL_CONF_TESTTXEN 0x00040000 #define USBTLL_CHANNEL_CONF_TESTEN 0x00020000 #define USBTLL_CHANNEL_CONF_DRVVBUS 0x00010000 #define USBTLL_CHANNEL_CONF_CHRGVBUS 0x00008000 #define USBTLL_CHANNEL_CONF_ULPINOBITSTUFF 0x00000800 #define USBTLL_CHANNEL_CONF_ULPIAUTOIDLE 0x00000400 #define USBTLL_CHANNEL_CONF_UTMIAUTOIDLE 0x00000200 #define USBTLL_CHANNEL_CONF_ULPIDDRMODE 0x00000100 #define USBTLL_CHANNEL_CONF_ULPIOUTCLKMODE 0x00000080 #define USBTLL_CHANNEL_CONF_TLLFULLSPEED 0x00000040 #define USBTLL_CHANNEL_CONF_TLLCONNECT 0x00000020 #define USBTLL_CHANNEL_CONF_TLLATTACH 0x00000010 #define USBTLL_CHANNEL_CONF_UTMIISADEV 0x00000008 #define USBTLL_CHANNEL_CONF_CHANMODE 0x00000006 #define USBTLL_CHANNEL_CONF_CHANEN 0x00000001 #define USBTLL_SAR_CNTX(i) (0x400 + (0x04 * (i))) /* 8-bit */ #define ULPI_VENDOR_ID_LO(i) (0x100 * (i) + 0) #define ULPI_VENDOR_ID_HI(i) (0x100 * (i) + 1) #define ULPI_PRODUCT_ID_LO(i) (0x100 * (i) + 2) #define ULPI_PRODUCT_ID_HI(i) (0x100 * (i) + 3) #define ULPI_FUNCTION_CTRL(i) (0x100 * (i) + 4) #define ULPI_FUNCTION_CTRL_SET(i) (0x100 * (i) + 5) #define ULPI_FUNCTION_CTRL_CLR(i) (0x100 * (i) + 6) #define ULPI_FUNCTION_CTRL_SUSPENDM 0x40 #define ULPI_FUNCTION_CTRL_RESET 0x20 #define ULPI_FUNCTION_CTRL_OPMODE 0x18 #define ULPI_FUNCTION_CTRL_TERMSELECT 0x04 #define ULPI_FUNCTION_CTRL_XCVRSELECT 0x03 #define ULPI_INTERFACE_CTRL(i) (0x100 * (i) + 7) #define ULPI_INTERFACE_CTRL_SET(i) (0x100 * (i) + 8) #define ULPI_INTERFACE_CTRL_CLR(i) (0x100 * (i) + 9) #define ULPI_INTERFACE_CTRL_INTERFACE_PROTECT_DISABLE 0x80 #define ULPI_INTERFACE_CTRL_AUTORESUME 0x10 #define ULPI_INTERFACE_CTRL_CLOCKSUSPENDM 0x08 #define ULPI_INTERFACE_CTRL_FSLSSERIALMODE_3PIN 0x02 #define ULPI_INTERFACE_CTRL_FSLSSERIALMODE_6PIN 0x01 #define ULPI_OTG_CTRL(i) (0x100 * (i) + 10) #define ULPI_OTG_CTRL_SET(i) (0x100 * (i) + 11) #define ULPI_OTG_CTRL_CLR(i) (0x100 * (i) + 12) #define ULPI_OTG_CTRL_DRVVBUS 0x20 #define ULPI_OTG_CTRL_CHRGVBUS 0x10 #define ULPI_OTG_CTRL_DISCHRGVBUS 0x08 #define ULPI_OTG_CTRL_DMPULLDOWN 0x04 #define ULPI_OTG_CTRL_DPPULLDOWN 0x02 #define ULPI_OTG_CTRL_IDPULLUP 0x01 #define ULPI_USB_INT_EN_RISE(i) (0x100 * (i) + 13) #define ULPI_USB_INT_EN_RISE_SET(i) (0x100 * (i) + 14) #define ULPI_USB_INT_EN_RISE_CLR(i) (0x100 * (i) + 15) #define ULPI_USB_INT_EN_FALL(i) (0x100 * (i) + 16) #define ULPI_USB_INT_EN_FALL_SET(i) (0x100 * (i) + 17) #define ULPI_USB_INT_EN_FALL_CLR(i) (0x100 * (i) + 18) #define ULPI_USB_INT_STATUS(i) (0x100 * (i) + 19) #define ULPI_USB_INT_LATCH(i) (0x100 * (i) + 20) #define ULPI_USB_INT_IDGND 0x10 #define ULPI_USB_INT_SESSEND 0x08 #define ULPI_USB_INT_SESSVALID 0x04 #define ULPI_USB_INT_VBUSVALID 0x02 #define ULPI_USB_INT_HOSTDISCONNECT 0x01 #define ULPI_DEBUG(i) (0x100 * (i) + 21) #define ULPI_DEBUG_LINESTATE 0x03 #define ULPI_SCRATCH_REGISTER(i) (0x100 * (i) + 22) #define ULPI_SCRATCH_REGISTER_SET(i) (0x100 * (i) + 23) #define ULPI_SCRATCH_REGISTER_CLR(i) (0x100 * (i) + 24) #define ULPI_EXTENDED_SET_ACCESS(i) (0x100 * (i) + 47) #define ULPI_UTMI_VCONTROL_EN(i) (0x100 * (i) + 48) #define ULPI_UTMI_VCONTROL_EN_SET(i) (0x100 * (i) + 49) #define ULPI_UTMI_VCONTROL_EN_CLR(i) (0x100 * (i) + 50) #define ULPI_UTMI_VCONTROL_STATUS(i) (0x100 * (i) + 51) #define ULPI_UTMI_VCONTROL_LATCH(i) (0x100 * (i) + 52) #define ULPI_UTMI_VC(n) (1 << (n)) #define ULPI_UTMI_VSTATUS(i) (0x100 * (i) + 53) #define ULPI_UTMI_VSTATUS_SET(i) (0x100 * (i) + 54) #define ULPI_UTMI_VSTATUS_CLR(i) (0x100 * (i) + 55) #define ULPI_USB_INT_LATCH_NOCLR(i) (0x100 * (i) + 56) /* use ULPI_USB_INT_* */ #define ULPI_VENDOR_INT_EN(i) (0x100 * (i) + 59) #define ULPI_VENDOR_INT_EN_SET(i) (0x100 * (i) + 60) #define ULPI_VENDOR_INT_EN_CLR(i) (0x100 * (i) + 61) #define ULPI_VENDOR_INT_EN_P2P_EN 0x01 #define ULPI_VENDOR_INT_STATUS(i) (0x100 * (i) + 62) #define ULPI_VENDOR_INT_STATUS_UTMI_SUSPENDM 0x01 #define ULPI_VENDOR_INT_LATCH(i) (0x100 * (i) + 62) #define ULPI_VENDOR_INT_STATUS_P2P_LATCH 0x01 #endif /* !_OMAP3_USBTLLREG_H */