/* $NetBSD: s3c24x0_clk.c,v 1.14 2012/02/10 09:17:49 nisimura Exp $ */ /* * Copyright (c) 2003 Genetec corporation. All rights reserved. * Written by Hiroyuki Bessho for Genetec corporation. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. The name of Genetec corporation may not be used to endorse * or promote products derived from this software without specific prior * written permission. * * THIS SOFTWARE IS PROVIDED BY GENETEC CORP. ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL GENETEC CORP. * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE * POSSIBILITY OF SUCH DAMAGE. */ #include __KERNEL_RCSID(0, "$NetBSD: s3c24x0_clk.c,v 1.14 2012/02/10 09:17:49 nisimura Exp $"); #include #include #include #include #include #include #include #include #include #include #include #ifndef STATHZ #define STATHZ 64 #endif #define TIMER_FREQUENCY(pclk) ((pclk)/16) /* divider=1/16 */ static uint32_t timer4_reload_value; static uint32_t timer4_prescaler; static uint32_t timer4_mseccount; #define usec_to_counter(t) \ ((timer4_mseccount*(t))/1000) #define counter_to_usec(c,pclk) \ (((c)*timer4_prescaler*1000)/(TIMER_FREQUENCY(pclk)/1000)) static u_int s3c24x0_get_timecount(struct timecounter *); static struct timecounter s3c24x0_timecounter = { s3c24x0_get_timecount, /* get_timecount */ 0, /* no poll_pps */ 0xffffffff, /* counter_mask */ 0, /* frequency */ "s3c24x0", /* name */ 100, /* quality */ NULL, /* prev */ NULL, /* next */ }; static volatile uint32_t s3c24x0_base; static u_int s3c24x0_get_timecount(struct timecounter *tc) { struct s3c24x0_softc *sc = (struct s3c24x0_softc *) s3c2xx0_softc; int save, int_pend0, int_pend1, count; int int_pend; save = disable_interrupts(I32_bit); again: int_pend = bus_space_read_4(sc->sc_sx.sc_iot, sc->sc_sx.sc_intctl_ioh, INTCTL_SRCPND); int_pend0 = (1<sc_sx.sc_iot, sc->sc_timer_ioh, TIMER_TCNTO(4)); for (;;) { int_pend1 = bus_space_read_4(sc->sc_sx.sc_iot, sc->sc_sx.sc_intctl_ioh, INTCTL_SRCPND); int_pend1 &= (1<sc_sx.sc_iot, sc->sc_timer_ioh, TIMER_TCNTO(4)); } if (__predict_false(count > timer4_reload_value)) { /* * Buggy Hardware Warning --- sometimes timer counter * reads bogus value like 0xffff. I guess it happens when * the timer is reloaded. */ printf("Bogus value from timer counter: %d\n", count); goto again; } restore_interrupts(save); if (int_pend1 && count > 0) { count -= timer4_reload_value; } return s3c24x0_base - count; } static inline int read_timer(struct s3c24x0_softc *sc) { int count; do { count = bus_space_read_2(sc->sc_sx.sc_iot, sc->sc_timer_ioh, TIMER_TCNTO(4)); } while ( __predict_false(count > timer4_reload_value) ); return count; } /* * delay: * * Delay for at least N microseconds. */ void delay(u_int n) { struct s3c24x0_softc *sc = (struct s3c24x0_softc *) s3c2xx0_softc; int v0, v1, delta; u_int ucnt; if ( timer4_reload_value == 0 ){ /* not initialized yet */ while ( n-- > 0 ){ int m; for (m=0; m<100; ++m ) ; } return; } /* read down counter */ v0 = read_timer(sc); ucnt = usec_to_counter(n); while( ucnt > 0 ) { v1 = read_timer(sc); delta = v0 - v1; if ( delta < 0 ) delta += timer4_reload_value; #ifdef DEBUG if (delta < 0 || delta > timer4_reload_value) panic("wrong value from timer counter"); #endif if((u_int)delta < ucnt){ ucnt -= (u_int)delta; v0 = v1; } else { ucnt = 0; } } /*NOTREACHED*/ } void setstatclockrate(int newhz) { } static int hardintr(void *arg) { atomic_add_32(&s3c24x0_base, timer4_reload_value); hardclock((struct clockframe *)arg); return 1; } static int statintr(void *arg) { statclock((struct clockframe *)arg); return 1; } void cpu_initclocks(void) { struct s3c24x0_softc *sc = (struct s3c24x0_softc *)s3c2xx0_softc; long tc; int prescaler, h; int pclk = s3c2xx0_softc->sc_pclk; bus_space_tag_t iot = sc->sc_sx.sc_iot; bus_space_handle_t ioh = sc->sc_timer_ioh; uint32_t reg; stathz = STATHZ; profhz = stathz; #define time_constant(hz) (TIMER_FREQUENCY(pclk) /(hz)/ prescaler) #define calc_time_constant(hz) \ do { \ prescaler = 1; \ do { \ ++prescaler; \ tc = time_constant(hz); \ } while( tc > 65536 ); \ } while(0) /* Use the channels 4 and 3 for hardclock and statclock, respectively */ /* stop all timers */ bus_space_write_4(iot, ioh, TIMER_TCON, 0); /* calc suitable prescaler value */ h = MIN(hz,stathz); calc_time_constant(h); timer4_prescaler = prescaler; timer4_reload_value = (TIMER_FREQUENCY(pclk) / hz / prescaler) - 1; timer4_mseccount = TIMER_FREQUENCY(pclk)/timer4_prescaler/1000 ; bus_space_write_4(iot, ioh, TIMER_TCNTB(4), /*((prescaler - 1) << 16) |*/ (timer4_reload_value )); printf("clock: hz=%d stathz = %d PCLK=%d prescaler=%d tc=%ld\n", hz, stathz, pclk, prescaler, tc); bus_space_write_4(iot, ioh, TIMER_TCNTB(3), /*((prescaler - 1) << 16) |*/ (time_constant(stathz))); s3c24x0_intr_establish(S3C24X0_INT_TIMER4, IPL_CLOCK, IST_NONE, hardintr, 0); s3c24x0_intr_establish(S3C24X0_INT_TIMER3, IPL_HIGH, IST_NONE, statintr, 0); /* set prescaler1 */ reg = bus_space_read_4(iot, ioh, TIMER_TCFG0); bus_space_write_4(iot, ioh, TIMER_TCFG0, (reg & ~0xff00) | ((prescaler-1) << 8)); /* divider 1/16 for ch #3 and #4 */ reg = bus_space_read_4(iot, ioh, TIMER_TCFG1); bus_space_write_4(iot, ioh, TIMER_TCFG1, (reg & ~(TCFG1_MUX_MASK(3)|TCFG1_MUX_MASK(4))) | (TCFG1_MUX_DIV16 << TCFG1_MUX_SHIFT(3)) | (TCFG1_MUX_DIV16 << TCFG1_MUX_SHIFT(4)) ); /* start timers */ reg = bus_space_read_4(iot, ioh, TIMER_TCON); reg &= ~(TCON_MASK(3)|TCON_MASK(4)); s3c24x0_base = timer4_reload_value; /* load the time constant */ bus_space_write_4(iot, ioh, TIMER_TCON, reg | TCON_MANUALUPDATE(3) | TCON_MANUALUPDATE(4)); /* set auto reload and start */ bus_space_write_4(iot, ioh, TIMER_TCON, reg | TCON_AUTORELOAD(3) | TCON_START(3) | TCON_AUTORELOAD(4) | TCON_START(4) ); s3c24x0_timecounter.tc_frequency = TIMER_FREQUENCY(pclk) / timer4_prescaler; tc_init(&s3c24x0_timecounter); } #if 0 /* test routine for delay() */ void delay_test(void); void delay_test(void) { struct s3c2xx0_softc *sc = s3c2xx0_softc; volatile int *pdatc = (volatile int *) ((char *)bus_space_vaddr(sc->sc_iot, sc->sc_gpio_ioh) + GPIO_PDATC); static const int d[] = {0, 1, 5, 10, 50, 100, 500, 1000, -1}; int i; int v = *pdatc & ~0x07; for (;;) { *pdatc = v | 2; for (i=0; d[i] >= 0; ++i) { *pdatc = v | 3; delay(d[i]); *pdatc = v | 2; } *pdatc = v; } } #endif