/* $NetBSD: ipaq_gpioreg.h,v 1.6 2008/04/28 20:23:21 martin Exp $ */ /*- * Copyright (c) 2001 The NetBSD Foundation, Inc. All rights reserved. * * This code is derived from software contributed to The NetBSD Foundation * by Ichiro FUKUHARA (ichiro@ichiro.org). * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE * POSSIBILITY OF SUCH DAMAGE. */ /* * iPAQ H3600 specific parameter */ /* port I/O(Active) name desc 0 I(L) PWR_ON# button detect: power-on 1 I(L) IP_IRQ# cpu-interrupt 2...9 O LDD{8..15} LCD DATA(8-15) 10 I(L) CARD_IND1# PCMCIA Socket1 inserted detection 11 I(L) CARD_IRQ1# PCMCIA slot1 IRQ 12 O CLK_SET0 clock select 0 for audio codec 13 O CLK_SET1 clock select 1 for audio codec 14 I/O L3_SDA UDA1341 L3DATA 15 O L3_MODE UDA1341 L3MODE 16 O L3_SCLK UDA1341 L3SCLK 17 I(L) CARD_IND0# PCMCIA Socket0 inserted detection 18 I(L) KEY_ACT# button detect: center button 19 I SYS_CLK Stereo audio codev external clock 20 I(H) BAT_FAULT Battery fault 21 I(L) CARD_IRQ0# PCMCIA slot0 IRQ 22 I(L) LOCK# expansion pack lock/unlock signal 23 I(H) COM_DCD RS-232 DCD 24 I(H) OPT_IRQ expansion pach shared IRQ 25 I(H) COM_CTS RS-232 CTS 26 O(H) COM_RTS RS-232 RTS 27 O(L) OPT_DETECT# Indicates presence of expansion pack inserted Extended GPIO 0 O(H) VPEN Enables programming and erasing of Flash 1 O(H) CARD_RESET CF/PCMCIA card reset signal 2 O(H) OPT_RESET Expansion pack reset signal 3 O(L) CODEC_RESET# onboard codec reset signal 4 O(H) OPT_NVRAM_ON Enables power supply to the NVRAM of the Expansion pack.(=OPT_ON) 5 O(H) OPT_ON Enables full power supply to the Expansion pack. 6 O(H) LCD_ON Enables LCD 3.3V power supply 7 O(H) RS232_ON Enables RS232 8 O(H) LCD_PCI Enables power to LCD control IC 9 O(H) IR_ON Enables power to IR module 10 O(H) AUD_ON Enables power to audio output amp. 11 O(H) AUD_PWR_ON Enables power to all audio modules. 12 O(H) QMUTE Mutes yhe onboard audio codec 13 O IR_FSEL FIR mode selection:H=FIR,L=SIR 14 O(H) LCD_5V_ON Enables 5V to the LCD module 15 O(H) LVDD_ON Enables 9V and -6.5V to the LCD module */ #define GPIO_H3600_POWER_BUTTON GPIO (0) #define GPIO_H3600_CLK_SET0 GPIO (12) #define GPIO_H3600_CLK_SET1 GPIO (13) #define GPIO_H3600_PCMCIA_CD0 GPIO (17) #define GPIO_H3600_PCMCIA_CD1 GPIO (10) #define GPIO_H3600_PCMCIA_IRQ0 GPIO (21) #define GPIO_H3600_PCMCIA_IRQ1 GPIO (11) #define GPIO_H3600_L3_DATA GPIO (14) #define GPIO_H3600_L3_MODE GPIO (15) #define GPIO_H3600_L3_CLK GPIO (16) #define GPIO_H3600_OPT_LOCK GPIO (22) #define GPIO_H3600_OPT_IRQ GPIO (24) #define GPIO_H3600_OPT_DETECT GPIO (27) #define EGPIO_H3600_VPEN GPIO (0) #define EGPIO_H3600_CARD_RESET GPIO (1) #define EGPIO_H3600_OPT_RESET GPIO (2) #define EGPIO_H3600_CODEC_RESET GPIO (3) #define EGPIO_H3600_OPT_NVRAM_ON GPIO (4) #define EGPIO_H3600_OPT_ON GPIO (5) #define EGPIO_H3600_LCD33_ON GPIO (6) #define EGPIO_H3600_RS232_ON GPIO (7) #define EGPIO_H3600_LCD_PCI GPIO (8) #define EGPIO_H3600_IR_ON GPIO (9) #define EGPIO_H3600_AUD_ON GPIO (10) #define EGPIO_H3600_AUD_PWRON GPIO (11) #define EGPIO_H3600_QMUTE GPIO (12) #define EGPIO_H3600_IR_FSEL GPIO (13) #define EGPIO_H3600_LCD5_ON GPIO (14) #define EGPIO_H3600_LVDD_ON GPIO (15) #define EGPIO_INIT EGPIO_H3600_RS232_ON| \ EGPIO_H3600_AUD_PWRON| \ EGPIO_H3600_QMUTE| \ EGPIO_H3600_AUD_ON #define EGPIO_LCD_INIT EGPIO_H3600_LCD33_ON| \ EGPIO_H3600_LCD_PCI| \ EGPIO_H3600_LCD5_ON| \ EGPIO_H3600_LVDD_ON