/* $NetBSD: wzero3_reg.h,v 1.7 2012/01/21 19:44:29 nonaka Exp $ */ /*- * Copyright (C) 2008, 2009, 2010 NONAKA Kimihiro * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ #ifndef _HPCARM_DEV_WZERO3_REG_H_ #define _HPCARM_DEV_WZERO3_REG_H_ /* GPIO --------------------------------------------------------------------- */ /* * WS003SH/WS004SH specific parameter */ #define GPIO_WS003SH_SD_DETECT 9 /* In */ #define GPIO_WS003SH_TOUCH_PANEL 11 /* In */ #define GPIO_WS003SH_SLIDE 12 /* In */ #define GPIO_WS003SH_FULLKEY_LED 17 /* Out: H:ON, L:OFF */ #define GPIO_WS003SH_ANTENNA_LED 37 /* Out: H:ON, L:OFF */ #define GPIO_WS003SH_MAX1233_CS 48 /* Out */ #define GPIO_WS003SH_RESET 89 /* Out */ #define GPIO_WS003SH_POWER_BUTTON 95 /* In */ #define GPIO_WS003SH_VIB 97 /* Out */ #define GPIO_WS003SH_USB_CLIENT_DETECT 103 /* In */ #define GPIO_WS003SH_SD_POWER 107 /* Out: H:ON, L:OFF */ #define GPIO_WS003SH_CHARGE 114 /* Out: H:ON, L:OFF */ #define GPIO_WS003SH_AC_DETECT 115 /* In */ /* WS003SH: GPIO OUT pin * CLR: 10,16,18,19,20,21,23,33,40,56,87,90,91,104,119,120 * SET: 39,54,57 */ /* * WS007SH specific parameter */ #define GPIO_WS007SH_RESET_BUTTON 1 /* In: L: press, H: release */ #define GPIO_WS007SH_POWER_BUTTON 9 /* In */ #define GPIO_WS007SH_TOUCH_PANEL 21 /* In */ #define GPIO_WS007SH_ADS7846_CS 33 /* Out */ #define GPIO_WS007SH_USB_CLIENT_DETECT 35 /* In */ #define GPIO_WS007SH_USB_HOST_POWER 37 /* Out */ #define GPIO_WS007SH_USB_HOST_DETECT 41 /* In */ #define GPIO_WS007SH_SD_DETECT 48 /* In */ #define GPIO_WS007SH_HSYNC 75 /* In */ #define GPIO_WS007SH_SLIDE 104 /* In */ #define GPIO_WS007SH_SD_POWER 107 /* Out: H:ON, L:OFF */ /* * WS011SH specific parameter */ /* port I/O(Active) name desc 1 I(?) RESET_BTN button detect: reset (on: release, off:press) 9 I(?) PWR_BTN button detect: power-on (on: press, off:release) 21 I(?) TPANEL touch panel (on: release, off: press) 37 O USBH_PWR USB Host power (H: enable, L: disable) 41 I(L) USBH_DET USB Host cable detect (on: remove, off: insert) 48 I(L) SD_DET microSD card detect (on: remove, off: insert) 51 I(?) SLIDE LCD slider (on: open, off: close) 52 I(?) KEYLOCK key lock slider (on: unlock, off:lock) 57 I(?) EXCRWAL_DET 81 I(L) EPDET earphone adapter detect (on: remove, off: insert) 91 I(?) FULLKEYBOARD? 96 I(?) JACKET_DET jacket detect (on: close, off: open) ?105 I(?) WSIM_DET W-SIM detect (on: insert, off: remove) ?106 I(?) WSIM? (same as GPIO#105?) 107 O(?) SD_PWR: SD Card power (on: on, off: off) 115 I(H) ACDET AC adapter detect (on: insert, off: remove) 116 I(?) USBC_DET USB Client cable detect (on: insert, off: remove) */ #define GPIO_WS011SH_RESET_BUTTON 1 /* In */ #define GPIO_WS011SH_POWER_BUTTON 9 /* In */ #define GPIO_WS011SH_KEYPAD 14 /* In */ #define GPIO_WS011SH_TOUCH_PANEL 21 /* In */ #define GPIO_WS011SH_AK4184_CS 33 /* Out */ #define GPIO_WS011SH_USB_HOST_POWER 37 /* Out */ #define GPIO_WS011SH_USB_HOST_DETECT 41 /* In */ #define GPIO_WS011SH_SD_DETECT 48 /* In */ #define GPIO_WS011SH_SLIDE 51 /* In */ #define GPIO_WS011SH_KEY_LOCK 52 /* In */ #define GPIO_WS011SH_HSYNC 75 /* In */ #define GPIO_WS011SH_SD_POWER 107 /* Out */ #define GPIO_WS011SH_USB_CLIENT_DETECT 116 /* In */ /* * WS020SH specific parameter */ #define GPIO_WS020SH_RESET_BUTTON 1 /* In */ #define GPIO_WS020SH_TOUCH_PANEL 21 /* In */ #define GPIO_WS020SH_USB_HOST_DETECT 41 /* In */ #define GPIO_WS020SH_SD_DETECT 48 /* In */ #define GPIO_WS020SH_SLIDE 51 /* In */ #define GPIO_WS020SH_KEY_LOCK 52 /* In */ #define GPIO_WS020SH_POWER_BUTTON 55 /* In */ #define GPIO_WS020SH_SD_POWER 107 /* Out */ #define GPIO_WS020SH_USB_CLIENT_DETECT 116 /* In */ #endif /* _HPCARM_DEV_WZERO3_REG_H_ */