/* $NetBSD: zs_pcc.c,v 1.21 2008/04/28 20:23:29 martin Exp $ */ /*- * Copyright (c) 1996 The NetBSD Foundation, Inc. * All rights reserved. * * This code is derived from software contributed to The NetBSD Foundation * by Gordon W. Ross and Jason R. Thorpe. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE * POSSIBILITY OF SUCH DAMAGE. */ /* * Zilog Z8530 Dual UART driver (machine-dependent part) * * Runs two serial lines per chip using slave drivers. * Plain tty/async lines use the zs_async slave. * * Modified for NetBSD/mvme68k by Jason R. Thorpe */ #include __KERNEL_RCSID(0, "$NetBSD: zs_pcc.c,v 1.21 2008/04/28 20:23:29 martin Exp $"); #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include "ioconf.h" /* Definition of the driver for autoconfig. */ static int zsc_pcc_match(device_t, cfdata_t, void *); static void zsc_pcc_attach(device_t, device_t, void *); CFATTACH_DECL_NEW(zsc_pcc, sizeof(struct zsc_softc), zsc_pcc_match, zsc_pcc_attach, NULL, NULL); cons_decl(zsc_pcc); /* * Is the zs chip present? */ static int zsc_pcc_match(device_t parent, cfdata_t cf, void *aux) { struct pcc_attach_args *pa = aux; if (strcmp(pa->pa_name, zsc_cd.cd_name)) return 0; pa->pa_ipl = cf->pcccf_ipl; if (pa->pa_ipl == -1) pa->pa_ipl = ZSHARD_PRI; return 1; } /* * Attach a found zs. * * Match slave number to zs unit number, so that misconfiguration will * not set up the keyboard as ttya, etc. */ static void zsc_pcc_attach(device_t parent, device_t self, void *aux) { struct zsc_softc *zsc = device_private(self); struct pcc_attach_args *pa = aux; struct zsdevice zs; bus_space_handle_t bush; int zs_level, ir; static int didintr; zsc->zsc_dev = self; /* Map the device's registers */ bus_space_map(pa->pa_bust, pa->pa_offset, 4, 0, &bush); zs_level = pa->pa_ipl; /* XXX: This is a gross hack. I need to bus-space zs.c ... */ zs.zs_chan_b.zc_csr = (volatile uint8_t *)bush; zs.zs_chan_b.zc_data = (volatile uint8_t *)bush + 1; zs.zs_chan_a.zc_csr = (volatile uint8_t *)bush + 2; zs.zs_chan_a.zc_data = (volatile uint8_t *)bush + 3; /* * Do common parts of SCC configuration. * Note that the vector is not actually used by the ZS chip on * MVME-147. We set up the PCC so that it provides the vector. * This is just here so the real vector is printed at config time. */ zs_config(zsc, &zs, PCC_VECBASE + PCCV_ZS, PCLK_147); evcnt_attach_dynamic(&zsc->zsc_evcnt, EVCNT_TYPE_INTR, pccintr_evcnt(zs_level), "rs232", device_xname(zsc->zsc_dev)); /* * Now safe to install interrupt handlers. Note the arguments * to the interrupt handlers aren't used. Note, we only do this * once since both SCCs interrupt at the same level and vector. */ if (didintr == 0) { didintr = 1; pccintr_establish(PCCV_ZS, zshard_shared, zs_level, zsc, NULL); } /* Sanity check the interrupt levels. */ ir = pcc_reg_read(sys_pcc, PCCREG_SERIAL_INTR_CTRL); if (((ir & PCC_IMASK) != 0) && ((ir & PCC_IMASK) != zs_level)) panic("%s: zs configured at different IPLs", __func__); /* * Set master interrupt enable. Vector is supplied by the PCC. */ pcc_reg_write(sys_pcc, PCCREG_SERIAL_INTR_CTRL, zs_level | PCC_IENABLE | PCC_ZSEXTERN); zs_write_reg(zsc->zsc_cs[0], 2, PCC_VECBASE + PCCV_ZS); zs_write_reg(zsc->zsc_cs[0], 9, zs_init_reg[9]); } /**************************************************************** * Console support functions (MVME PCC specific!) ****************************************************************/ /* * Check for SCC console. The MVME-147 always uses unit 0 chan 0. */ void zsc_pcccnprobe(struct consdev *cp) { extern const struct cdevsw zstty_cdevsw; if (machineid != MVME_147) { cp->cn_pri = CN_DEAD; return; } /* Initialize required fields. */ cp->cn_dev = makedev(cdevsw_lookup_major(&zstty_cdevsw), 0); cp->cn_pri = CN_NORMAL; } void zsc_pcccninit(struct consdev *cp) { bus_space_handle_t bush; struct zsdevice zs; bus_space_map(&_mainbus_space_tag, intiobase_phys + MAINBUS_PCC_OFFSET + PCC_ZS0_OFF, 4, 0, &bush); /* XXX: This is a gross hack. I need to bus-space zs.c ... */ zs.zs_chan_b.zc_csr = (volatile uint8_t *)bush; zs.zs_chan_b.zc_data = (volatile uint8_t *)bush + 1; zs.zs_chan_a.zc_csr = (volatile uint8_t *)bush + 2; zs.zs_chan_a.zc_data = (volatile uint8_t *)bush + 3; /* Do common parts of console init. */ zs_cnconfig(0, 0, &zs, PCLK_147); }