/* $NetBSD: acpi_power.c,v 1.35 2017/06/01 02:45:09 chs Exp $ */ /*- * Copyright (c) 2009, 2010, 2011 The NetBSD Foundation, Inc. * All rights reserved. * * This code is derived from software contributed to The NetBSD Foundation * by Jukka Ruohonen. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE * POSSIBILITY OF SUCH DAMAGE. */ /*- * Copyright (c) 2001 Michael Smith * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. */ #include __KERNEL_RCSID(0, "$NetBSD: acpi_power.c,v 1.35 2017/06/01 02:45:09 chs Exp $"); #include #include #include #include #include #include #include #include #define _COMPONENT ACPI_BUS_COMPONENT ACPI_MODULE_NAME ("acpi_power") #define ACPI_STA_POW_OFF 0x00 #define ACPI_STA_POW_ON 0x01 struct acpi_power_res { ACPI_HANDLE res_handle; ACPI_INTEGER res_level; ACPI_INTEGER res_order; ACPI_HANDLE res_ref[5]; char res_name[5]; kmutex_t res_mutex; TAILQ_ENTRY(acpi_power_res) res_list; }; static TAILQ_HEAD(, acpi_power_res) res_head = TAILQ_HEAD_INITIALIZER(res_head); static int32_t acpi_power_acpinode = CTL_EOL; static int32_t acpi_power_powernode = CTL_EOL; static struct acpi_power_res *acpi_power_res_init(ACPI_HANDLE); static struct acpi_power_res *acpi_power_res_get(ACPI_HANDLE); static ACPI_STATUS acpi_power_get_direct(struct acpi_devnode *); static ACPI_STATUS acpi_power_get_indirect(struct acpi_devnode *); static ACPI_STATUS acpi_power_switch(struct acpi_devnode *, int, bool); static ACPI_STATUS acpi_power_res_ref(struct acpi_power_res *, ACPI_HANDLE); static ACPI_STATUS acpi_power_res_deref(struct acpi_power_res *, ACPI_HANDLE); static ACPI_STATUS acpi_power_res_sta(ACPI_OBJECT *, void *); static ACPI_OBJECT *acpi_power_pkg_get(ACPI_HANDLE, int); static int acpi_power_sysctl(SYSCTLFN_PROTO); static const char *acpi_xname(ACPI_HANDLE); static struct acpi_power_res * acpi_power_res_init(ACPI_HANDLE hdl) { struct acpi_power_res *tmp = NULL; struct acpi_power_res *res = NULL; ACPI_OBJECT *obj; ACPI_BUFFER buf; ACPI_STATUS rv; size_t i; rv = acpi_eval_struct(hdl, NULL, &buf); if (ACPI_FAILURE(rv)) goto out; obj = buf.Pointer; if (obj->Type != ACPI_TYPE_POWER) { rv = AE_TYPE; goto out; } res = kmem_zalloc(sizeof(*res), KM_SLEEP); res->res_handle = hdl; res->res_level = obj->PowerResource.SystemLevel; res->res_order = obj->PowerResource.ResourceOrder; (void)strlcpy(res->res_name, acpi_xname(hdl), sizeof(res->res_name)); for (i = 0; i < __arraycount(res->res_ref); i++) res->res_ref[i] = NULL; mutex_init(&res->res_mutex, MUTEX_DEFAULT, IPL_NONE); /* * Power resources should be ordered. * * These *should* be enabled from low values to high * values and disabled from high values to low values. */ TAILQ_FOREACH(tmp, &res_head, res_list) { if (res->res_order < tmp->res_order) { TAILQ_INSERT_BEFORE(tmp, res, res_list); break; } } if (tmp == NULL) TAILQ_INSERT_TAIL(&res_head, res, res_list); ACPI_DEBUG_PRINT((ACPI_DB_INFO, "%s added to the " "power resource queue\n", res->res_name)); out: if (buf.Pointer != NULL) ACPI_FREE(buf.Pointer); return res; } static struct acpi_power_res * acpi_power_res_get(ACPI_HANDLE hdl) { struct acpi_power_res *res; TAILQ_FOREACH(res, &res_head, res_list) { if (res->res_handle == hdl) return res; } return acpi_power_res_init(hdl); } bool acpi_power_register(ACPI_HANDLE hdl) { return true; } void acpi_power_deregister(ACPI_HANDLE hdl) { struct acpi_devnode *ad = acpi_match_node(hdl); struct acpi_power_res *res; if (ad == NULL) return; /* * Remove all references in each resource. */ TAILQ_FOREACH(res, &res_head, res_list) (void)acpi_power_res_deref(res, ad->ad_handle); } /* * Get the D-state of an ACPI device node. */ bool acpi_power_get(ACPI_HANDLE hdl, int *state) { struct acpi_devnode *ad = acpi_match_node(hdl); ACPI_STATUS rv; if (ad == NULL) return false; /* * As _PSC may be broken, first try to * retrieve the power state indirectly * via power resources. */ rv = acpi_power_get_indirect(ad); if (ACPI_FAILURE(rv)) rv = acpi_power_get_direct(ad); if (ACPI_FAILURE(rv)) goto fail; KASSERT(ad->ad_state != ACPI_STATE_ERROR); if (ad->ad_state < ACPI_STATE_D0 || ad->ad_state > ACPI_STATE_D3) { rv = AE_BAD_VALUE; goto fail; } if (state != NULL) *state = ad->ad_state; return true; fail: ad->ad_state = ACPI_STATE_ERROR; if (state != NULL) *state = ad->ad_state; ACPI_DEBUG_PRINT((ACPI_DB_INFO, "failed to get power state " "for %s: %s\n", ad->ad_name, AcpiFormatException(rv))); return false; } static ACPI_STATUS acpi_power_get_direct(struct acpi_devnode *ad) { ACPI_INTEGER val = 0; ACPI_STATUS rv; rv = acpi_eval_integer(ad->ad_handle, "_PSC", &val); KDASSERT((uint64_t)val < INT_MAX); ad->ad_state = (int)val; return rv; } static ACPI_STATUS acpi_power_get_indirect(struct acpi_devnode *ad) { ACPI_OBJECT *pkg; ACPI_STATUS rv; int i; CTASSERT(ACPI_STATE_D0 == 0 && ACPI_STATE_D1 == 1); CTASSERT(ACPI_STATE_D2 == 2 && ACPI_STATE_D3 == 3); /* * The device is in a given D-state if all resources are on. * To derive this, evaluate all elements in each _PRx package * (x = 0 ... 3) and break if the noted condition becomes true. */ for (ad->ad_state = ACPI_STATE_D3, i = 0; i < ACPI_STATE_D3; i++) { pkg = acpi_power_pkg_get(ad->ad_handle, i); if (pkg == NULL) continue; /* * For each element in the _PRx package, evaluate _STA * and return AE_OK only if all power resources are on. */ rv = acpi_foreach_package_object(pkg, acpi_power_res_sta, ad); if (ACPI_FAILURE(rv) && rv != AE_CTRL_FALSE) goto out; if (ACPI_SUCCESS(rv)) { ad->ad_state = i; goto out; } ACPI_FREE(pkg); pkg = NULL; } KASSERT(ad->ad_state == ACPI_STATE_D3); return AE_OK; out: ACPI_FREE(pkg); return rv; } /* * Set the D-state of an ACPI device node. */ bool acpi_power_set(ACPI_HANDLE hdl, int state) { struct acpi_devnode *ad = acpi_match_node(hdl); ACPI_STATUS rv; char path[5]; int old; if (ad == NULL) return false; if (state < ACPI_STATE_D0 || state > ACPI_STATE_D3) { rv = AE_BAD_PARAMETER; goto fail; } if (acpi_power_get(ad->ad_handle, &old) != true) { rv = AE_NOT_FOUND; goto fail; } KASSERT(ad->ad_state == old); KASSERT(ad->ad_state != ACPI_STATE_ERROR); if (ad->ad_state == state) { rv = AE_ALREADY_EXISTS; goto fail; } /* * It is only possible to go to D0 ("on") from D3 ("off"). */ if (ad->ad_state == ACPI_STATE_D3 && state != ACPI_STATE_D0) { rv = AE_BAD_PARAMETER; goto fail; } /* * As noted in ACPI 4.0 (appendix A.2.1), the bus power state * should never be lower than the highest state of one of its * devices. Consequently, we cannot set the state to a lower * (i.e. higher power) state than the parent device's state. */ if ((ad->ad_parent != NULL) && (ad->ad_parent->ad_flags & ACPI_DEVICE_POWER) != 0) { if (ad->ad_parent->ad_state > state) { rv = AE_ABORT_METHOD; goto fail; } } /* * We first sweep through the resources required for the target * state, turning things on and building references. After this * we dereference the resources required for the current state, * turning the resources off as we go. */ rv = acpi_power_switch(ad, state, true); if (ACPI_FAILURE(rv) && rv != AE_CTRL_CONTINUE) goto fail; rv = acpi_power_switch(ad, ad->ad_state, false); if (ACPI_FAILURE(rv) && rv != AE_CTRL_CONTINUE) goto fail; /* * Last but not least, invoke the power state switch method, * if available. Because some systems use only _PSx for the * power state transitions, we do this even if there is no _PRx. */ (void)snprintf(path, sizeof(path), "_PS%d", state); (void)AcpiEvaluateObject(ad->ad_handle, path, NULL, NULL); ACPI_DEBUG_PRINT((ACPI_DB_INFO, "%s turned from " "D%d to D%d\n", ad->ad_name, old, state)); ad->ad_state = state; return true; fail: ad->ad_state = ACPI_STATE_ERROR; ACPI_DEBUG_PRINT((ACPI_DB_INFO, "failed to set power state to D%d " "for %s: %s\n", state, ad->ad_name, AcpiFormatException(rv))); return false; } static ACPI_STATUS acpi_power_switch(struct acpi_devnode *ad, int state, bool on) { ACPI_OBJECT *elm, *pkg; ACPI_STATUS rv = AE_OK; ACPI_HANDLE hdl; uint32_t i, n; /* * For each element in the _PRx package, fetch * the reference handle, search for this handle * from the power resource queue, and turn the * resource behind the handle on or off. */ pkg = acpi_power_pkg_get(ad->ad_handle, state); if (pkg == NULL) return AE_CTRL_CONTINUE; n = pkg->Package.Count; for (i = 0; i < n; i++) { elm = &pkg->Package.Elements[i]; rv = acpi_eval_reference_handle(elm, &hdl); if (ACPI_FAILURE(rv)) continue; (void)acpi_power_res(hdl, ad->ad_handle, on); } ACPI_FREE(pkg); return rv; } ACPI_STATUS acpi_power_res(ACPI_HANDLE hdl, ACPI_HANDLE ref, bool on) { struct acpi_power_res *res; const char *str; ACPI_STATUS rv; /* * Search for the resource. */ res = acpi_power_res_get(hdl); if (res == NULL) return AE_NOT_FOUND; if (ref == NULL) return AE_BAD_PARAMETER; /* * Adjust the reference counting. This is * necessary since a single power resource * can be shared by multiple devices. */ if (on) { rv = acpi_power_res_ref(res, ref); str = "_ON"; } else { rv = acpi_power_res_deref(res, ref); str = "_OFF"; } if (ACPI_FAILURE(rv)) return rv; /* * Turn the resource on or off. */ return AcpiEvaluateObject(res->res_handle, str, NULL, NULL); } static ACPI_STATUS acpi_power_res_ref(struct acpi_power_res *res, ACPI_HANDLE ref) { size_t i, j = SIZE_MAX; mutex_enter(&res->res_mutex); for (i = 0; i < __arraycount(res->res_ref); i++) { /* * Do not error out if the handle * has already been referenced. */ if (res->res_ref[i] == ref) { mutex_exit(&res->res_mutex); return AE_OK; } if (j == SIZE_MAX && res->res_ref[i] == NULL) j = i; } if (j == SIZE_MAX) { mutex_exit(&res->res_mutex); return AE_LIMIT; } res->res_ref[j] = ref; mutex_exit(&res->res_mutex); ACPI_DEBUG_PRINT((ACPI_DB_INFO, "%s referenced " "by %s\n", res->res_name, acpi_xname(ref))); return AE_OK; } static ACPI_STATUS acpi_power_res_deref(struct acpi_power_res *res, ACPI_HANDLE ref) { size_t i; mutex_enter(&res->res_mutex); for (i = 0; i < __arraycount(res->res_ref); i++) { if (res->res_ref[i] != ref) continue; res->res_ref[i] = NULL; mutex_exit(&res->res_mutex); ACPI_DEBUG_PRINT((ACPI_DB_INFO, "%s dereferenced " "by %s\n", res->res_name, acpi_xname(ref))); return AE_OK; } /* * If the array remains to be non-empty, * something else is using the resource * and hence it can not be turned off. */ mutex_exit(&res->res_mutex); return AE_ABORT_METHOD; } static ACPI_STATUS acpi_power_res_sta(ACPI_OBJECT *elm, void *arg) { ACPI_INTEGER val; ACPI_HANDLE hdl; ACPI_STATUS rv; rv = acpi_eval_reference_handle(elm, &hdl); if (ACPI_FAILURE(rv)) goto fail; rv = acpi_eval_integer(hdl, "_STA", &val); if (ACPI_FAILURE(rv)) goto fail; KDASSERT((uint64_t)val < INT_MAX); if ((int)val != ACPI_STA_POW_ON && (int)val != ACPI_STA_POW_OFF) return AE_BAD_VALUE; if ((int)val != ACPI_STA_POW_ON) return AE_CTRL_FALSE; /* XXX: Not an error. */ return AE_OK; fail: if (rv == AE_CTRL_FALSE) rv = AE_ERROR; ACPI_DEBUG_PRINT((ACPI_DB_DEBUG_OBJECT, "failed to evaluate _STA " "for %s: %s\n", acpi_xname(hdl), AcpiFormatException(rv))); return rv; } static ACPI_OBJECT * acpi_power_pkg_get(ACPI_HANDLE hdl, int state) { char path[5] = "_PR?"; ACPI_OBJECT *obj; ACPI_BUFFER buf; ACPI_STATUS rv; path[3] = '0' + state; rv = acpi_eval_struct(hdl, path, &buf); if (ACPI_FAILURE(rv)) goto fail; if (buf.Length == 0) { rv = AE_LIMIT; goto fail; } obj = buf.Pointer; if (obj->Type != ACPI_TYPE_PACKAGE) { rv = AE_TYPE; goto fail; } if (obj->Package.Count == 0) { rv = AE_LIMIT; goto fail; } return obj; fail: if (buf.Pointer != NULL) ACPI_FREE(buf.Pointer); ACPI_DEBUG_PRINT((ACPI_DB_DEBUG_OBJECT, "failed to evaluate %s for " "%s: %s\n", path, acpi_xname(hdl), AcpiFormatException(rv))); return NULL; } SYSCTL_SETUP(sysctl_acpi_power_setup, "sysctl hw.acpi.power subtree setup") { const struct sysctlnode *anode; int err; err = sysctl_createv(NULL, 0, NULL, &anode, CTLFLAG_PERMANENT, CTLTYPE_NODE, "acpi", NULL, NULL, 0, NULL, 0, CTL_HW, CTL_CREATE, CTL_EOL); if (err != 0) return; acpi_power_acpinode = anode->sysctl_num; err = sysctl_createv(NULL, 0, &anode, &anode, CTLFLAG_PERMANENT, CTLTYPE_NODE, "power", SYSCTL_DESCR("ACPI device power states"), NULL, 0, NULL, 0, CTL_CREATE, CTL_EOL); if (err != 0) return; acpi_power_powernode = anode->sysctl_num; } void acpi_power_add(struct acpi_devnode *ad) { const char *str = NULL; device_t dev; int err; KASSERT(ad != NULL && ad->ad_root != NULL); KASSERT((ad->ad_flags & ACPI_DEVICE_POWER) != 0); if (acpi_power_acpinode == CTL_EOL || acpi_power_powernode == CTL_EOL) return; if (ad->ad_device != NULL) str = device_xname(ad->ad_device); else { dev = acpi_pcidev_find_dev(ad); if (dev != NULL) str = device_xname(dev); } if (str == NULL) return; err = sysctl_createv(NULL, 0, NULL, NULL, CTLFLAG_READONLY, CTLTYPE_STRING, str, NULL, acpi_power_sysctl, 0, (void *)ad, 0, CTL_HW, acpi_power_acpinode, acpi_power_powernode, CTL_CREATE, CTL_EOL); if (err != 0) aprint_error_dev(ad->ad_root, "sysctl_createv" "(hw.acpi.power.%s) failed (err %d)\n", str, err); } static int acpi_power_sysctl(SYSCTLFN_ARGS) { struct acpi_devnode *ad; struct sysctlnode node; int err, state; char t[3]; node = *rnode; ad = rnode->sysctl_data; if (acpi_power_get(ad->ad_handle, &state) != true) state = 0; (void)memset(t, '\0', sizeof(t)); (void)snprintf(t, sizeof(t), "D%d", state); node.sysctl_data = &t; err = sysctl_lookup(SYSCTLFN_CALL(&node)); if (err || newp == NULL) return err; return 0; } /* * XXX: Move this to acpi_util.c by refactoring * acpi_name() to optionally return a single name. */ static const char * acpi_xname(ACPI_HANDLE hdl) { static char str[5]; ACPI_BUFFER buf; ACPI_STATUS rv; buf.Pointer = str; buf.Length = sizeof(str); rv = AcpiGetName(hdl, ACPI_SINGLE_NAME, &buf); if (ACPI_FAILURE(rv)) return "????"; return str; }