/* $NetBSD: acpi_tz.c,v 1.89 2017/06/01 02:45:09 chs Exp $ */ /* * Copyright (c) 2003 Jared D. McNeill * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. The name of the author may not be used to endorse or promote products * derived from this software without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. */ /* * ACPI Thermal Zone driver */ #include __KERNEL_RCSID(0, "$NetBSD: acpi_tz.c,v 1.89 2017/06/01 02:45:09 chs Exp $"); #include #include #include #include #include #include #include #include #include #include #define _COMPONENT ACPI_TZ_COMPONENT ACPI_MODULE_NAME ("acpi_tz") #define ACPI_NOTIFY_TZ_ZONE 0x80 #define ACPI_NOTIFY_TZ_TRIP 0x81 #define ACPI_NOTIFY_TZ_DEVLIST 0x82 #define ATZ_F_CRITICAL 0x01 /* zone critical */ #define ATZ_F_HOT 0x02 /* zone hot */ #define ATZ_F_PASSIVE 0x04 /* zone passive cooling */ #define ATZ_F_PASSIVEONLY 0x08 /* zone is passive cooling only */ #define ATZ_ACTIVE_NONE -1 /* * The constants are as follows: * * ATZ_TZP_RATE default polling interval (30 seconds) if no _TZP * ATZ_NLEVELS number of cooling levels for _ACx and _ALx * ATZ_ZEROC 0 C, measured in 0.1 Kelvin * ATZ_TMP_INVALID temporarily invalid temperature * ATZ_ZONE_EXPIRE zone info refetch interval (15 minutes) */ #define ATZ_TZP_RATE 300 #define ATZ_NLEVELS 10 #define ATZ_ZEROC 2732 #define ATZ_TMP_INVALID 0xffffffff #define ATZ_ZONE_EXPIRE 9000 /* * All temperatures are reported in 0.1 Kelvin. * The ACPI specification assumes that K = C + 273.2 * rather than the nominal 273.15 used by envsys(4). */ #define ATZ2UKELVIN(t) ((t) * 100000 - 50000) struct acpitz_zone { ACPI_BUFFER al[ATZ_NLEVELS]; uint32_t ac[ATZ_NLEVELS]; uint32_t crt; uint32_t hot; uint32_t rtv; uint32_t psv; uint32_t tc1; uint32_t tc2; uint32_t tmp; uint32_t prevtmp; uint32_t tzp; uint32_t fanmin; uint32_t fanmax; uint32_t fancurrent; }; struct acpitz_softc { struct acpi_devnode *sc_node; struct sysmon_envsys *sc_sme; struct acpitz_zone sc_zone; struct callout sc_callout; envsys_data_t sc_temp_sensor; envsys_data_t sc_fan_sensor; int sc_active; int sc_flags; int sc_zone_expire; bool sc_first; bool sc_have_fan; struct cpu_info **sc_psl; size_t sc_psl_size; }; static int acpitz_match(device_t, cfdata_t, void *); static void acpitz_attach(device_t, device_t, void *); static int acpitz_detach(device_t, int); static void acpitz_get_status(void *); static void acpitz_get_zone(void *, int); static void acpitz_get_zone_quiet(void *); static char *acpitz_celcius_string(int); static void acpitz_power_off(struct acpitz_softc *); static void acpitz_power_zone(struct acpitz_softc *, int, int); static void acpitz_sane_temp(uint32_t *tmp); static ACPI_STATUS acpitz_switch_cooler(ACPI_OBJECT *, void *); static void acpitz_notify_handler(ACPI_HANDLE, uint32_t, void *); static int acpitz_get_integer(device_t, const char *, uint32_t *); static void acpitz_tick(void *); static void acpitz_init_envsys(device_t); static void acpitz_get_limits(struct sysmon_envsys *, envsys_data_t *, sysmon_envsys_lim_t *, uint32_t *); static int acpitz_get_fanspeed(device_t, uint32_t *, uint32_t *, uint32_t *); #ifdef notyet static ACPI_STATUS acpitz_set_fanspeed(device_t, uint32_t); #endif static void acpitz_print_processor_list(device_t); CFATTACH_DECL_NEW(acpitz, sizeof(struct acpitz_softc), acpitz_match, acpitz_attach, acpitz_detach, NULL); /* * acpitz_match: autoconf(9) match routine */ static int acpitz_match(device_t parent, cfdata_t match, void *aux) { struct acpi_attach_args *aa = aux; if (aa->aa_node->ad_type != ACPI_TYPE_THERMAL) return 0; return 1; } /* * acpitz_attach: autoconf(9) attach routine */ static void acpitz_attach(device_t parent, device_t self, void *aux) { struct acpitz_softc *sc = device_private(self); struct acpi_attach_args *aa = aux; ACPI_INTEGER val; ACPI_STATUS rv; sc->sc_first = true; sc->sc_have_fan = false; sc->sc_node = aa->aa_node; sc->sc_zone.tzp = ATZ_TZP_RATE; aprint_naive("\n"); acpitz_print_processor_list(self); aprint_normal("\n"); /* * The _TZP (ACPI 4.0, p. 430) defines the recommended * polling interval (in tenths of seconds). A value zero * means that polling "should not be necessary". */ rv = acpi_eval_integer(sc->sc_node->ad_handle, "_TZP", &val); if (ACPI_SUCCESS(rv) && val != 0) sc->sc_zone.tzp = val; aprint_debug_dev(self, "polling interval %d.%d seconds\n", sc->sc_zone.tzp / 10, sc->sc_zone.tzp % 10); sc->sc_zone_expire = ATZ_ZONE_EXPIRE / sc->sc_zone.tzp; /* * XXX: The fan controls seen here are available on * some HP laptops. Arguably these should not * appear in a generic device driver like this. */ if (acpitz_get_fanspeed(self, &sc->sc_zone.fanmin, &sc->sc_zone.fanmax, &sc->sc_zone.fancurrent) == 0) sc->sc_have_fan = true; acpitz_get_zone(self, 1); acpitz_get_status(self); (void)pmf_device_register(self, NULL, NULL); (void)acpi_power_register(sc->sc_node->ad_handle); (void)acpi_register_notify(sc->sc_node, acpitz_notify_handler); callout_init(&sc->sc_callout, CALLOUT_MPSAFE); callout_setfunc(&sc->sc_callout, acpitz_tick, self); acpitz_init_envsys(self); callout_schedule(&sc->sc_callout, sc->sc_zone.tzp * hz / 10); } static int acpitz_detach(device_t self, int flags) { struct acpitz_softc *sc = device_private(self); ACPI_HANDLE hdl; ACPI_BUFFER al; ACPI_STATUS rv; int i; callout_halt(&sc->sc_callout, NULL); callout_destroy(&sc->sc_callout); pmf_device_deregister(self); acpi_deregister_notify(sc->sc_node); /* * Although the device itself should not contain any power * resources, we have possibly used the resources of active * cooling devices. To unregister these, first fetch a fresh * active cooling zone, and then detach the resources from * the reference handles contained in the cooling zone. */ acpitz_get_zone(self, 0); for (i = 0; i < ATZ_NLEVELS; i++) { if (sc->sc_zone.al[i].Pointer == NULL) continue; al = sc->sc_zone.al[i]; rv = acpi_eval_reference_handle(al.Pointer, &hdl); if (ACPI_SUCCESS(rv)) acpi_power_deregister(hdl); ACPI_FREE(sc->sc_zone.al[i].Pointer); } if (sc->sc_psl) kmem_free(sc->sc_psl, sc->sc_psl_size); if (sc->sc_sme != NULL) sysmon_envsys_unregister(sc->sc_sme); return 0; } static void acpitz_get_zone_quiet(void *opaque) { acpitz_get_zone(opaque, 0); } static void acpitz_get_status(void *opaque) { device_t dv = opaque; struct acpitz_softc *sc = device_private(dv); uint32_t tmp, fmin, fmax, fcurrent; int active, changed, flags, i; sc->sc_zone_expire--; if (sc->sc_zone_expire <= 0) { sc->sc_zone_expire = ATZ_ZONE_EXPIRE / sc->sc_zone.tzp; ACPI_DEBUG_PRINT((ACPI_DB_INFO, "%s: zone refetch forced\n", device_xname(dv))); acpitz_get_zone(dv, 0); } if (acpitz_get_integer(dv, "_TMP", &tmp) != 0) return; sc->sc_zone.prevtmp = sc->sc_zone.tmp; sc->sc_zone.tmp = tmp; if (sc->sc_first != false) sc->sc_zone.prevtmp = tmp; /* XXX: Sanity check? */ if (acpitz_get_fanspeed(dv, &fmin, &fmax, &fcurrent) == 0) { if (fcurrent != ATZ_TMP_INVALID) sc->sc_zone.fancurrent = fcurrent; } sc->sc_temp_sensor.state = ENVSYS_SVALID; sc->sc_temp_sensor.value_cur = ATZ2UKELVIN(sc->sc_zone.tmp); sc->sc_fan_sensor.state = ENVSYS_SVALID; sc->sc_fan_sensor.value_cur = sc->sc_zone.fancurrent; ACPI_DEBUG_PRINT((ACPI_DB_INFO, "%s: zone temperature is %s C\n", device_xname(dv), acpitz_celcius_string(sc->sc_zone.tmp))); /* * XXX: Passive cooling is not yet supported. */ if ((sc->sc_flags & ATZ_F_PASSIVEONLY) != 0) return; /* * As noted in ACPI 4.0 (p. 420), the temperature * thresholds are conveyed in the optional _ACx * object (x = 0 ... 9). The smaller the x, the * greater the cooling level. We prefer to keep * the highest cooling mode when in "active". */ active = ATZ_ACTIVE_NONE; for (i = ATZ_NLEVELS - 1; i >= 0; i--) { if (sc->sc_zone.ac[i] == ATZ_TMP_INVALID) continue; if (sc->sc_zone.ac[i] <= tmp) active = i; } flags = sc->sc_flags & ~(ATZ_F_CRITICAL | ATZ_F_HOT | ATZ_F_PASSIVE); if (sc->sc_zone.psv != ATZ_TMP_INVALID && tmp >= sc->sc_zone.psv) flags |= ATZ_F_PASSIVE; if (sc->sc_zone.hot != ATZ_TMP_INVALID && tmp >= sc->sc_zone.hot) flags |= ATZ_F_HOT; if (sc->sc_zone.crt != ATZ_TMP_INVALID && tmp >= sc->sc_zone.crt) flags |= ATZ_F_CRITICAL; if (flags != sc->sc_flags) { changed = (sc->sc_flags ^ flags) & flags; sc->sc_flags = flags; if ((changed & ATZ_F_CRITICAL) != 0) { sc->sc_temp_sensor.state = ENVSYS_SCRITOVER; aprint_debug_dev(dv, "zone went critical, %s C\n", acpitz_celcius_string(tmp)); } else if ((changed & ATZ_F_HOT) != 0) { sc->sc_temp_sensor.state = ENVSYS_SCRITOVER; aprint_debug_dev(dv, "zone went hot, %s C\n", acpitz_celcius_string(tmp)); } } /* Power on the fans. */ if (sc->sc_active != active) { if (sc->sc_active != ATZ_ACTIVE_NONE) acpitz_power_zone(sc, sc->sc_active, 0); ACPI_DEBUG_PRINT((ACPI_DB_INFO, "%s: active cooling " "level %d\n", device_xname(dv), active)); if (active != ATZ_ACTIVE_NONE) acpitz_power_zone(sc, active, 1); sc->sc_active = active; } } static char * acpitz_celcius_string(int dk) { static char buf[10]; int dc; dc = abs(dk - ATZ_ZEROC); (void)snprintf(buf, sizeof(buf), "%s%d.%d", (dk >= ATZ_ZEROC) ? "" : "-", dc / 10, dc % 10); return buf; } static ACPI_STATUS acpitz_switch_cooler(ACPI_OBJECT *obj, void *arg) { int flag, pwr_state; ACPI_HANDLE cooler; ACPI_STATUS rv; /* * The _ALx object is a package in which the elements * are reference handles to an active cooling device * (typically PNP0C0B, ACPI fan device). Try to turn * on (or off) the power resources behind these handles * to start (or terminate) the active cooling. */ flag = *(int *)arg; pwr_state = (flag != 0) ? ACPI_STATE_D0 : ACPI_STATE_D3; rv = acpi_eval_reference_handle(obj, &cooler); if (ACPI_FAILURE(rv)) return rv; (void)acpi_power_set(cooler, pwr_state); return AE_OK; } /* * acpitz_power_zone: * * Power on or off the i:th part of the zone zone. */ static void acpitz_power_zone(struct acpitz_softc *sc, int i, int on) { KASSERT(i >= 0 && i < ATZ_NLEVELS); (void)acpi_foreach_package_object(sc->sc_zone.al[i].Pointer, acpitz_switch_cooler, &on); } /* * acpitz_power_off: * * Power off parts of the zone. */ static void acpitz_power_off(struct acpitz_softc *sc) { int i; for (i = 0 ; i < ATZ_NLEVELS; i++) { if (sc->sc_zone.al[i].Pointer == NULL) continue; acpitz_power_zone(sc, i, 0); } sc->sc_active = ATZ_ACTIVE_NONE; sc->sc_flags &= ~(ATZ_F_CRITICAL | ATZ_F_HOT | ATZ_F_PASSIVE); } static void acpitz_get_zone(void *opaque, int verbose) { device_t dv = opaque; struct acpitz_softc *sc = device_private(dv); int comma, i, valid_levels; ACPI_OBJECT *obj; ACPI_STATUS rv; char buf[5]; if (sc->sc_first != true) { acpitz_power_off(sc); for (i = 0; i < ATZ_NLEVELS; i++) { if (sc->sc_zone.al[i].Pointer != NULL) ACPI_FREE(sc->sc_zone.al[i].Pointer); sc->sc_zone.al[i].Pointer = NULL; } } valid_levels = 0; for (i = 0; i < ATZ_NLEVELS; i++) { (void)snprintf(buf, sizeof(buf), "_AC%d", i); if (acpitz_get_integer(dv, buf, &sc->sc_zone.ac[i])) continue; (void)snprintf(buf, sizeof(buf), "_AL%d", i); rv = acpi_eval_struct(sc->sc_node->ad_handle, buf, &sc->sc_zone.al[i]); if (ACPI_FAILURE(rv)) { sc->sc_zone.al[i].Pointer = NULL; continue; } obj = sc->sc_zone.al[i].Pointer; if (obj->Type != ACPI_TYPE_PACKAGE || obj->Package.Count == 0) { sc->sc_zone.al[i].Pointer = NULL; ACPI_FREE(obj); continue; } if (sc->sc_first != false) aprint_normal_dev(dv, "active cooling level %d: %sC\n", i, acpitz_celcius_string(sc->sc_zone.ac[i])); valid_levels++; } /* * A brief summary (ACPI 4.0, section 11.4): * * _TMP : current temperature (in tenths of degrees) * _CRT : critical trip-point at which to shutdown * _HOT : critical trip-point at which to go to S4 * _PSV : passive cooling policy threshold * _TC1 : thermal constant for passive cooling * _TC2 : thermal constant for passive cooling */ (void)acpitz_get_integer(dv, "_TMP", &sc->sc_zone.tmp); (void)acpitz_get_integer(dv, "_CRT", &sc->sc_zone.crt); (void)acpitz_get_integer(dv, "_HOT", &sc->sc_zone.hot); (void)acpitz_get_integer(dv, "_PSV", &sc->sc_zone.psv); (void)acpitz_get_integer(dv, "_TC1", &sc->sc_zone.tc1); (void)acpitz_get_integer(dv, "_TC2", &sc->sc_zone.tc2); /* * If _RTV is not present or present and zero, * values are absolute (see ACPI 4.0, 425). */ acpitz_get_integer(dv, "_RTV", &sc->sc_zone.rtv); if (sc->sc_zone.rtv == ATZ_TMP_INVALID) sc->sc_zone.rtv = 0; acpitz_sane_temp(&sc->sc_zone.tmp); acpitz_sane_temp(&sc->sc_zone.crt); acpitz_sane_temp(&sc->sc_zone.hot); acpitz_sane_temp(&sc->sc_zone.psv); if (verbose != 0) { comma = 0; aprint_verbose_dev(dv, "levels: "); if (sc->sc_zone.crt != ATZ_TMP_INVALID) { aprint_verbose("critical %s C", acpitz_celcius_string(sc->sc_zone.crt)); comma = 1; } if (sc->sc_zone.hot != ATZ_TMP_INVALID) { aprint_verbose("%shot %s C", comma ? ", " : "", acpitz_celcius_string(sc->sc_zone.hot)); comma = 1; } if (sc->sc_zone.psv != ATZ_TMP_INVALID) { aprint_verbose("%spassive %s C", comma ? ", " : "", acpitz_celcius_string(sc->sc_zone.psv)); comma = 1; } if (valid_levels == 0) { sc->sc_flags |= ATZ_F_PASSIVEONLY; if (sc->sc_first != false) aprint_verbose("%spassive cooling", comma ? ", " : ""); } aprint_verbose("\n"); } for (i = 0; i < ATZ_NLEVELS; i++) acpitz_sane_temp(&sc->sc_zone.ac[i]); acpitz_power_off(sc); sc->sc_first = false; } static void acpitz_notify_handler(ACPI_HANDLE hdl, uint32_t notify, void *opaque) { ACPI_OSD_EXEC_CALLBACK func = NULL; device_t dv = opaque; switch (notify) { case ACPI_NOTIFY_TZ_ZONE: func = acpitz_get_status; break; case ACPI_NOTIFY_TZ_TRIP: case ACPI_NOTIFY_TZ_DEVLIST: func = acpitz_get_zone_quiet; break; default: aprint_debug_dev(dv, "unknown notify 0x%02X\n", notify); return; } (void)AcpiOsExecute(OSL_NOTIFY_HANDLER, func, dv); } static void acpitz_sane_temp(uint32_t *tmp) { /* Sane temperatures are beteen 0 and 150 C. */ if (*tmp < ATZ_ZEROC || *tmp > ATZ_ZEROC + 1500) *tmp = ATZ_TMP_INVALID; } static int acpitz_get_integer(device_t dv, const char *cm, uint32_t *val) { struct acpitz_softc *sc = device_private(dv); ACPI_INTEGER tmp; ACPI_STATUS rv; rv = acpi_eval_integer(sc->sc_node->ad_handle, cm, &tmp); if (ACPI_FAILURE(rv)) { *val = ATZ_TMP_INVALID; ACPI_DEBUG_PRINT((ACPI_DB_DEBUG_OBJECT, "%s: failed to evaluate %s: %s\n", device_xname(dv), cm, AcpiFormatException(rv))); return 1; } *val = tmp; return 0; } static int acpitz_get_fanspeed(device_t dv, uint32_t *fanmin, uint32_t *fanmax, uint32_t *fancurrent) { struct acpitz_softc *sc = device_private(dv); ACPI_INTEGER fmin, fmax, fcurr; ACPI_HANDLE handle; ACPI_STATUS rv; int rc = 0; handle = sc->sc_node->ad_handle; rv = acpi_eval_integer(handle, "FMIN", &fmin); if (ACPI_FAILURE(rv)) { fmin = ATZ_TMP_INVALID; rc = 1; } rv = acpi_eval_integer(handle, "FMAX", &fmax); if (ACPI_FAILURE(rv)) { fmax = ATZ_TMP_INVALID; rc = 1; } rv = acpi_eval_integer(handle, "FRSP", &fcurr); if (ACPI_FAILURE(rv)) { fcurr = ATZ_TMP_INVALID; rc = 1; } if (fanmin != NULL) *fanmin = fmin; if (fanmax != NULL) *fanmax = fmax; if (fancurrent != NULL) *fancurrent = fcurr; return rc; } #ifdef notyet static ACPI_STATUS acpitz_set_fanspeed(device_t dv, uint32_t fanspeed) { struct acpitz_softc *sc = device_private(dv); ACPI_HANDLE handle; ACPI_STATUS rv; handle = sc->sc_node->ad_handle; rv = acpi_eval_set_integer(handle, "FSSP", fanspeed); if (ACPI_FAILURE(rv)) aprint_debug_dev(dv, "failed to set fan speed to %u RPM: %s\n", fanspeed, AcpiFormatException(rv)); return rv; } #endif static void acpitz_print_processor_list(device_t dv) { struct acpitz_softc *sc = device_private(dv); ACPI_HANDLE handle = sc->sc_node->ad_handle; ACPI_OBJECT *obj, *pref; ACPI_HANDLE prhandle; ACPI_BUFFER buf; ACPI_STATUS rv; struct cpu_info *ci; unsigned int i, cnt; rv = acpi_eval_struct(handle, "_PSL", &buf); if (ACPI_FAILURE(rv) || buf.Pointer == NULL) return; obj = buf.Pointer; if (obj->Type != ACPI_TYPE_PACKAGE || obj->Package.Count == 0) goto done; sc->sc_psl_size = sizeof(ci) * (obj->Package.Count + 1); sc->sc_psl = kmem_zalloc(sc->sc_psl_size, KM_SLEEP); for (cnt = i = 0; i < obj->Package.Count; i++) { pref = &obj->Package.Elements[i]; rv = acpi_eval_reference_handle(pref, &prhandle); if (ACPI_FAILURE(rv)) continue; ci = acpi_match_cpu_handle(prhandle); if (ci == NULL) continue; if (cnt == 0) aprint_normal(":"); aprint_normal(" %s", device_xname(ci->ci_dev)); sc->sc_psl[cnt] = ci; ++cnt; } done: ACPI_FREE(buf.Pointer); } static void acpitz_tick(void *opaque) { device_t dv = opaque; struct acpitz_softc *sc = device_private(dv); (void)AcpiOsExecute(OSL_NOTIFY_HANDLER, acpitz_get_status, dv); callout_schedule(&sc->sc_callout, sc->sc_zone.tzp * hz / 10); } static void acpitz_init_envsys(device_t dv) { const int flags = ENVSYS_FMONLIMITS | ENVSYS_FMONNOTSUPP | ENVSYS_FHAS_ENTROPY; struct acpitz_softc *sc = device_private(dv); unsigned int i; sc->sc_sme = sysmon_envsys_create(); sc->sc_sme->sme_cookie = sc; sc->sc_sme->sme_name = device_xname(dv); sc->sc_sme->sme_flags = SME_DISABLE_REFRESH; sc->sc_sme->sme_get_limits = acpitz_get_limits; sc->sc_temp_sensor.flags = flags; sc->sc_temp_sensor.units = ENVSYS_STEMP; sc->sc_temp_sensor.state = ENVSYS_SINVALID; memset(sc->sc_temp_sensor.desc, 0, sizeof(sc->sc_temp_sensor.desc)); if (sc->sc_psl) { for (i = 0; sc->sc_psl[i] != NULL; i++) { if (i > 0) strlcat(sc->sc_temp_sensor.desc, "/", sizeof(sc->sc_temp_sensor.desc)); strlcat(sc->sc_temp_sensor.desc, device_xname(sc->sc_psl[i]->ci_dev), sizeof(sc->sc_temp_sensor.desc)); } strlcat(sc->sc_temp_sensor.desc, " ", sizeof(sc->sc_temp_sensor.desc)); } strlcat(sc->sc_temp_sensor.desc, "temperature", sizeof(sc->sc_temp_sensor.desc)); if (sysmon_envsys_sensor_attach(sc->sc_sme, &sc->sc_temp_sensor)) goto out; if (sc->sc_have_fan != false) { sc->sc_fan_sensor.flags = flags; sc->sc_fan_sensor.units = ENVSYS_SFANRPM; sc->sc_fan_sensor.state = ENVSYS_SINVALID; (void)strlcpy(sc->sc_fan_sensor.desc, "FAN", sizeof(sc->sc_fan_sensor.desc)); /* Ignore error because fan sensor is optional. */ (void)sysmon_envsys_sensor_attach(sc->sc_sme, &sc->sc_fan_sensor); } if (sysmon_envsys_register(sc->sc_sme) == 0) return; out: aprint_error_dev(dv, "unable to register with sysmon\n"); sysmon_envsys_destroy(sc->sc_sme); sc->sc_sme = NULL; } static void acpitz_get_limits(struct sysmon_envsys *sme, envsys_data_t *edata, sysmon_envsys_lim_t *limits, uint32_t *props) { struct acpitz_softc *sc = sme->sme_cookie; switch (edata->units) { case ENVSYS_STEMP: *props = 0; if (sc->sc_zone.hot != ATZ_TMP_INVALID) { *props |= PROP_CRITMAX; limits->sel_critmax = ATZ2UKELVIN(sc->sc_zone.hot); } else if (sc->sc_zone.crt != ATZ_TMP_INVALID) { *props |= PROP_CRITMAX; limits->sel_critmax = ATZ2UKELVIN(sc->sc_zone.crt); } break; case ENVSYS_SFANRPM: *props = 0; if (sc->sc_zone.fanmin != ATZ_TMP_INVALID) { *props |= PROP_WARNMIN; limits->sel_warnmin = sc->sc_zone.fanmin; } if (sc->sc_zone.fanmax != ATZ_TMP_INVALID) { *props |= PROP_WARNMAX; limits->sel_warnmax = sc->sc_zone.fanmax; } break; } } MODULE(MODULE_CLASS_DRIVER, acpitz, "sysmon_envsys"); #ifdef _MODULE #include "ioconf.c" #endif static int acpitz_modcmd(modcmd_t cmd, void *aux) { int rv = 0; switch (cmd) { case MODULE_CMD_INIT: #ifdef _MODULE rv = config_init_component(cfdriver_ioconf_acpitz, cfattach_ioconf_acpitz, cfdata_ioconf_acpitz); #endif break; case MODULE_CMD_FINI: #ifdef _MODULE rv = config_fini_component(cfdriver_ioconf_acpitz, cfattach_ioconf_acpitz, cfdata_ioconf_acpitz); #endif break; default: rv = ENOTTY; } return rv; }