/* $NetBSD: gttwsireg.h,v 1.3 2014/09/11 11:14:44 jmcneill Exp $ */ /* * Copyright (c) 2008 Eiji Kawauchi. * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ #ifndef _GTTWSIREG_H_ #define _GTTWSIREG_H_ #include "opt_gttwsi.h" #define GTTWSI_SIZE 0x100 #if defined(GTTWSI_ALLWINNER) #define TWSI_SLAVEADDR 0x00 #define TWSI_EXTEND_SLAVEADDR 0x04 #define TWSI_DATA 0x08 #define TWSI_CONTROL 0x0c #define TWSI_STATUS 0x10 #define TWSI_BAUDRATE 0x14 #define TWSI_SOFTRESET 0x18 #else #define TWSI_SLAVEADDR 0x00 #define TWSI_EXTEND_SLAVEADDR 0x10 #define TWSI_DATA 0x04 #define TWSI_CONTROL 0x08 #define TWSI_STATUS 0x0c /* for read */ #define TWSI_BAUDRATE 0x0c /* for write */ #define TWSI_SOFTRESET 0x1c #endif #define SLAVEADDR_GCE_MASK 0x01 #define SLAVEADDR_SADDR_MASK 0xfe #define EXTEND_SLAVEADDR_MASK 0xff #define DATA_MASK 0xff #define CONTROL_ACK (1<<2) #define CONTROL_IFLG (1<<3) #define CONTROL_STOP (1<<4) #define CONTROL_START (1<<5) #define CONTROL_TWSIEN (1<<6) #define CONTROL_INTEN (1<<7) #define STAT_BE 0x00 /* Bus Error */ #define STAT_SCT 0x08 /* Start condition transmitted */ #define STAT_RSCT 0x10 /* Repeated start condition transmitted */ #define STAT_AWBT_AR 0x18 /* Address + write bit transd, ack recvd */ #define STAT_AWBT_ANR 0x20 /* Address + write bit transd, ack not recvd */ #define STAT_MTDB_AR 0x28 /* Master transd data byte, ack recvd */ #define STAT_MTDB_ANR 0x30 /* Master transd data byte, ack not recvd */ #define STAT_MLADADT 0x38 /* Master lost arbitr during addr or data tx */ #define STAT_ARBT_AR 0x40 /* Address + read bit transd, ack recvd */ #define STAT_ARBT_ANR 0x48 /* Address + read bit transd, ack not recvd */ #define STAT_MRRD_AT 0x50 /* Master received read data, ack transd */ #define STAT_MRRD_ANT 0x58 /* Master received read data, ack not transd */ #define STAT_SAWBT_AR 0xd0 /* Second addr + write bit transd, ack recvd */ #define STAT_SAWBT_ANR 0xd8 /* S addr + write bit transd, ack not recvd */ #define STAT_SARBT_AR 0xe0 /* Second addr + read bit transd, ack recvd */ #define STAT_SARBT_ANR 0xe8 /* S addr + read bit transd, ack not recvd */ #define STAT_NRS 0xf8 /* No relevant status */ #define SOFTRESET_VAL 0 /* reset value */ #define TWSI_RETRY_COUNT 1000 /* retry loop count */ #define TWSI_RETRY_DELAY 1 /* retry delay */ #define TWSI_STAT_DELAY 1 /* poll status delay */ #define TWSI_READ_DELAY 2 /* read delay */ #define TWSI_WRITE_DELAY 2 /* write delay */ #endif /* _GTTWSIREG_H_ */