/* $NetBSD: aha.c,v 1.63 2016/07/14 04:19:27 msaitoh Exp $ */ /*- * Copyright (c) 1997, 1998 The NetBSD Foundation, Inc. * All rights reserved. * * This code is derived from software contributed to The NetBSD Foundation * by Charles M. Hannum and by Jason R. Thorpe of the Numerical Aerospace * Simulation Facility, NASA Ames Research Center. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE * POSSIBILITY OF SUCH DAMAGE. */ /* * Originally written by Julian Elischer (julian@tfs.com) * for TRW Financial Systems for use under the MACH(2.5) operating system. * * TRW Financial Systems, in accordance with their agreement with Carnegie * Mellon University, makes this software available to CMU to distribute * or use in any manner that they see fit as long as this message is kept with * the software. For this reason TFS also grants any other persons or * organisations permission to use or modify this software. * * TFS supplies this software to be publicly redistributed * on the understanding that TFS is not responsible for the correct * functioning of this software in any circumstances. */ #include __KERNEL_RCSID(0, "$NetBSD: aha.c,v 1.63 2016/07/14 04:19:27 msaitoh Exp $"); #include "opt_ddb.h" #undef AHADIAG #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #ifndef DDB #define Debugger() panic("should call debugger here (aha1542.c)") #endif /* ! DDB */ #define AHA_MAXXFER ((AHA_NSEG - 1) << PGSHIFT) #ifdef AHADEBUG int aha_debug = 1; #endif /* AHADEBUG */ static int aha_cmd(bus_space_tag_t, bus_space_handle_t, struct aha_softc *, int, u_char *, int, u_char *); static void aha_finish_ccbs(struct aha_softc *); static void aha_free_ccb(struct aha_softc *, struct aha_ccb *); static int aha_init_ccb(struct aha_softc *, struct aha_ccb *); static struct aha_ccb *aha_get_ccb(struct aha_softc *); static struct aha_ccb *aha_ccb_phys_kv(struct aha_softc *, u_long); static void aha_queue_ccb(struct aha_softc *, struct aha_ccb *); static void aha_collect_mbo(struct aha_softc *); static void aha_start_ccbs(struct aha_softc *); static void aha_done(struct aha_softc *, struct aha_ccb *); static int aha_init(struct aha_softc *); static void aha_inquire_setup_information(struct aha_softc *); static void ahaminphys(struct buf *); static void aha_scsipi_request(struct scsipi_channel *, scsipi_adapter_req_t, void *); static int aha_poll(struct aha_softc *, struct scsipi_xfer *, int); static void aha_timeout(void *arg); static int aha_create_ccbs(struct aha_softc *, struct aha_ccb *, int); #define AHA_RESET_TIMEOUT 2000 /* time to wait for reset (mSec) */ #define AHA_ABORT_TIMEOUT 2000 /* time to wait for abort (mSec) */ /* * aha_cmd(iot, ioh, sc, icnt, ibuf, ocnt, obuf) * * Activate Adapter command * icnt: number of args (outbound bytes including opcode) * ibuf: argument buffer * ocnt: number of expected returned bytes * obuf: result buffer * wait: number of seconds to wait for response * * Performs an adapter command through the ports. Not to be confused with a * scsi command, which is read in via the DMA; one of the adapter commands * tells it to read in a scsi command. */ static int aha_cmd(bus_space_tag_t iot, bus_space_handle_t ioh, struct aha_softc *sc, int icnt, u_char *ibuf, int ocnt, u_char *obuf) { const char *name; int i; int wait; u_char sts; u_char opcode = ibuf[0]; if (sc != NULL) name = device_xname(sc->sc_dev); else name = "(aha probe)"; /* * Calculate a reasonable timeout for the command. */ switch (opcode) { case AHA_INQUIRE_DEVICES: wait = 90 * 20000; break; default: wait = 1 * 20000; break; } /* * Wait for the adapter to go idle, unless it's one of * the commands which don't need this */ if (opcode != AHA_MBO_INTR_EN) { for (i = 20000; i; i--) { /* 1 sec? */ sts = bus_space_read_1(iot, ioh, AHA_STAT_PORT); if (sts & AHA_STAT_IDLE) break; delay(50); } if (!i) { printf("%s: aha_cmd, host not idle(0x%x)\n", name, sts); return (1); } } /* * Now that it is idle, if we expect output, preflush the * queue feeding to us. */ if (ocnt) { while ((bus_space_read_1(iot, ioh, AHA_STAT_PORT)) & AHA_STAT_DF) bus_space_read_1(iot, ioh, AHA_DATA_PORT); } /* * Output the command and the number of arguments given * for each byte, first check the port is empty. */ while (icnt--) { for (i = wait; i; i--) { sts = bus_space_read_1(iot, ioh, AHA_STAT_PORT); if (!(sts & AHA_STAT_CDF)) break; delay(50); } if (!i) { if (opcode != AHA_INQUIRE_REVISION) printf("%s: aha_cmd, cmd/data port full\n", name); bus_space_write_1(iot, ioh, AHA_CTRL_PORT, AHA_CTRL_SRST); return (1); } bus_space_write_1(iot, ioh, AHA_CMD_PORT, *ibuf++); } /* * If we expect input, loop that many times, each time, * looking for the data register to have valid data */ while (ocnt--) { for (i = wait; i; i--) { sts = bus_space_read_1(iot, ioh, AHA_STAT_PORT); if (sts & AHA_STAT_DF) break; delay(50); } if (!i) { if (opcode != AHA_INQUIRE_REVISION) printf("%s: aha_cmd, cmd/data port empty %d\n", name, ocnt); bus_space_write_1(iot, ioh, AHA_CTRL_PORT, AHA_CTRL_SRST); return (1); } *obuf++ = bus_space_read_1(iot, ioh, AHA_DATA_PORT); } /* * Wait for the board to report a finished instruction. * We may get an extra interrupt for the HACC signal, but this is * unimportant. */ if (opcode != AHA_MBO_INTR_EN) { for (i = 20000; i; i--) { /* 1 sec? */ sts = bus_space_read_1(iot, ioh, AHA_INTR_PORT); /* XXX Need to save this in the interrupt handler? */ if (sts & AHA_INTR_HACC) break; delay(50); } if (!i) { printf("%s: aha_cmd, host not finished(0x%x)\n", name, sts); return (1); } } bus_space_write_1(iot, ioh, AHA_CTRL_PORT, AHA_CTRL_IRST); return (0); } void aha_attach(struct aha_softc *sc, struct aha_probe_data *apd) { struct scsipi_adapter *adapt = &sc->sc_adapter; struct scsipi_channel *chan = &sc->sc_channel; TAILQ_INIT(&sc->sc_free_ccb); TAILQ_INIT(&sc->sc_waiting_ccb); /* * Fill in the scsipi_adapter. */ memset(adapt, 0, sizeof(*adapt)); adapt->adapt_dev = sc->sc_dev; adapt->adapt_nchannels = 1; /* adapt_openings initialized below */ /* adapt_max_periph initialized below */ adapt->adapt_request = aha_scsipi_request; adapt->adapt_minphys = ahaminphys; /* * Fill in the scsipi_channel. */ memset(chan, 0, sizeof(*chan)); chan->chan_adapter = adapt; chan->chan_bustype = &scsi_bustype; chan->chan_channel = 0; chan->chan_ntargets = 8; chan->chan_nluns = 8; chan->chan_id = apd->sc_scsi_dev; aha_inquire_setup_information(sc); if (aha_init(sc) != 0) { /* Error during initialization! */ return; } /* * ask the adapter what subunits are present */ config_found(sc->sc_dev, &sc->sc_channel, scsiprint); } static void aha_finish_ccbs(struct aha_softc *sc) { struct aha_mbx_in *wmbi; struct aha_ccb *ccb; int i; wmbi = wmbx->tmbi; bus_dmamap_sync(sc->sc_dmat, sc->sc_dmamap_control, AHA_MBI_OFF(wmbi), sizeof(struct aha_mbx_in), BUS_DMASYNC_POSTREAD|BUS_DMASYNC_POSTWRITE); if (wmbi->stat == AHA_MBI_FREE) { for (i = 0; i < AHA_MBX_SIZE; i++) { if (wmbi->stat != AHA_MBI_FREE) { printf("%s: mbi not in round-robin order\n", device_xname(sc->sc_dev)); goto AGAIN; } aha_nextmbx(wmbi, wmbx, mbi); bus_dmamap_sync(sc->sc_dmat, sc->sc_dmamap_control, AHA_MBI_OFF(wmbi), sizeof(struct aha_mbx_in), BUS_DMASYNC_POSTREAD|BUS_DMASYNC_POSTWRITE); } #ifdef AHADIAGnot printf("%s: mbi interrupt with no full mailboxes\n", device_xname(sc->sc_dev)); #endif return; } AGAIN: do { ccb = aha_ccb_phys_kv(sc, phystol(wmbi->ccb_addr)); if (!ccb) { printf("%s: bad mbi ccb pointer; skipping\n", device_xname(sc->sc_dev)); goto next; } bus_dmamap_sync(sc->sc_dmat, sc->sc_dmamap_control, AHA_CCB_OFF(ccb), sizeof(struct aha_ccb), BUS_DMASYNC_POSTREAD|BUS_DMASYNC_POSTWRITE); #ifdef AHADEBUG if (aha_debug) { u_char *cp = ccb->scsi_cmd; printf("op=%x %x %x %x %x %x\n", cp[0], cp[1], cp[2], cp[3], cp[4], cp[5]); printf("stat %x for mbi addr = %p, ", wmbi->stat, wmbi); printf("ccb addr = %p\n", ccb); } #endif /* AHADEBUG */ switch (wmbi->stat) { case AHA_MBI_OK: case AHA_MBI_ERROR: if ((ccb->flags & CCB_ABORT) != 0) { /* * If we already started an abort, wait for it * to complete before clearing the CCB. We * could instead just clear CCB_SENDING, but * what if the mailbox was already received? * The worst that happens here is that we clear * the CCB a bit later than we need to. BFD. */ goto next; } break; case AHA_MBI_ABORT: case AHA_MBI_UNKNOWN: /* * Even if the CCB wasn't found, we clear it anyway. * See preceding comment. */ break; default: printf("%s: bad mbi status %02x; skipping\n", device_xname(sc->sc_dev), wmbi->stat); goto next; } callout_stop(&ccb->xs->xs_callout); aha_done(sc, ccb); next: wmbi->stat = AHA_MBI_FREE; bus_dmamap_sync(sc->sc_dmat, sc->sc_dmamap_control, AHA_MBI_OFF(wmbi), sizeof(struct aha_mbx_in), BUS_DMASYNC_PREREAD|BUS_DMASYNC_PREWRITE); aha_nextmbx(wmbi, wmbx, mbi); bus_dmamap_sync(sc->sc_dmat, sc->sc_dmamap_control, AHA_MBI_OFF(wmbi), sizeof(struct aha_mbx_in), BUS_DMASYNC_POSTREAD|BUS_DMASYNC_POSTWRITE); } while (wmbi->stat != AHA_MBI_FREE); wmbx->tmbi = wmbi; } /* * Catch an interrupt from the adaptor */ int aha_intr(void *arg) { struct aha_softc *sc = arg; bus_space_tag_t iot = sc->sc_iot; bus_space_handle_t ioh = sc->sc_ioh; u_char sts; #ifdef AHADEBUG printf("%s: aha_intr ", device_xname(sc->sc_dev)); #endif /*AHADEBUG */ /* * First acknowledge the interrupt, Then if it's not telling about * a completed operation just return. */ sts = bus_space_read_1(iot, ioh, AHA_INTR_PORT); if ((sts & AHA_INTR_ANYINTR) == 0) return (0); bus_space_write_1(iot, ioh, AHA_CTRL_PORT, AHA_CTRL_IRST); #ifdef AHADIAG /* Make sure we clear CCB_SENDING before finishing a CCB. */ aha_collect_mbo(sc); #endif /* Mail box out empty? */ if (sts & AHA_INTR_MBOA) { struct aha_toggle toggle; toggle.cmd.opcode = AHA_MBO_INTR_EN; toggle.cmd.enable = 0; aha_cmd(iot, ioh, sc, sizeof(toggle.cmd), (u_char *)&toggle.cmd, 0, (u_char *)0); aha_start_ccbs(sc); } /* Mail box in full? */ if (sts & AHA_INTR_MBIF) aha_finish_ccbs(sc); return (1); } static inline void aha_reset_ccb(struct aha_softc *sc, struct aha_ccb *ccb) { ccb->flags = 0; } /* * A ccb is put onto the free list. */ static void aha_free_ccb(struct aha_softc *sc, struct aha_ccb *ccb) { int s; s = splbio(); aha_reset_ccb(sc, ccb); TAILQ_INSERT_HEAD(&sc->sc_free_ccb, ccb, chain); splx(s); } static int aha_init_ccb(struct aha_softc *sc, struct aha_ccb *ccb) { bus_dma_tag_t dmat = sc->sc_dmat; int hashnum, error; /* * Create the DMA map for this CCB. */ error = bus_dmamap_create(dmat, AHA_MAXXFER, AHA_NSEG, AHA_MAXXFER, 0, BUS_DMA_NOWAIT|BUS_DMA_ALLOCNOW, &ccb->dmamap_xfer); if (error) { aprint_error_dev(sc->sc_dev, "unable to create ccb DMA map, error = %d\n", error); return (error); } /* * put in the phystokv hash table * Never gets taken out. */ ccb->hashkey = sc->sc_dmamap_control->dm_segs[0].ds_addr + AHA_CCB_OFF(ccb); hashnum = CCB_HASH(ccb->hashkey); ccb->nexthash = sc->sc_ccbhash[hashnum]; sc->sc_ccbhash[hashnum] = ccb; aha_reset_ccb(sc, ccb); return (0); } /* * Create a set of ccbs and add them to the free list. Called once * by aha_init(). We return the number of CCBs successfully created. */ static int aha_create_ccbs(struct aha_softc *sc, struct aha_ccb *ccbstore, int count) { struct aha_ccb *ccb; int i, error; memset(ccbstore, 0, sizeof(struct aha_ccb) * count); for (i = 0; i < count; i++) { ccb = &ccbstore[i]; if ((error = aha_init_ccb(sc, ccb)) != 0) { aprint_error_dev(sc->sc_dev, "unable to initialize ccb, error = %d\n", error); goto out; } TAILQ_INSERT_TAIL(&sc->sc_free_ccb, ccb, chain); } out: return (i); } /* * Get a free ccb * * If there are none, see if we can allocate a new one. If so, put it in * the hash table too otherwise either return an error or sleep. */ struct aha_ccb * aha_get_ccb(struct aha_softc *sc) { struct aha_ccb *ccb; int s; s = splbio(); ccb = TAILQ_FIRST(&sc->sc_free_ccb); if (ccb != NULL) { TAILQ_REMOVE(&sc->sc_free_ccb, ccb, chain); ccb->flags |= CCB_ALLOC; } splx(s); return (ccb); } /* * Given a physical address, find the ccb that it corresponds to. */ static struct aha_ccb * aha_ccb_phys_kv(struct aha_softc *sc, u_long ccb_phys) { int hashnum = CCB_HASH(ccb_phys); struct aha_ccb *ccb = sc->sc_ccbhash[hashnum]; while (ccb) { if (ccb->hashkey == ccb_phys) break; ccb = ccb->nexthash; } return (ccb); } /* * Queue a CCB to be sent to the controller, and send it if possible. */ static void aha_queue_ccb(struct aha_softc *sc, struct aha_ccb *ccb) { TAILQ_INSERT_TAIL(&sc->sc_waiting_ccb, ccb, chain); aha_start_ccbs(sc); } /* * Garbage collect mailboxes that are no longer in use. */ static void aha_collect_mbo(struct aha_softc *sc) { struct aha_mbx_out *wmbo; /* Mail Box Out pointer */ #ifdef AHADIAG struct aha_ccb *ccb; #endif wmbo = wmbx->cmbo; while (sc->sc_mbofull > 0) { bus_dmamap_sync(sc->sc_dmat, sc->sc_dmamap_control, AHA_MBO_OFF(wmbo), sizeof(struct aha_mbx_out), BUS_DMASYNC_POSTREAD|BUS_DMASYNC_POSTWRITE); if (wmbo->cmd != AHA_MBO_FREE) break; #ifdef AHADIAG ccb = aha_ccb_phys_kv(sc, phystol(wmbo->ccb_addr)); ccb->flags &= ~CCB_SENDING; #endif --sc->sc_mbofull; aha_nextmbx(wmbo, wmbx, mbo); } wmbx->cmbo = wmbo; } /* * Send as many CCBs as we have empty mailboxes for. */ static void aha_start_ccbs(struct aha_softc *sc) { bus_space_tag_t iot = sc->sc_iot; bus_space_handle_t ioh = sc->sc_ioh; struct aha_mbx_out *wmbo; /* Mail Box Out pointer */ struct aha_ccb *ccb; wmbo = wmbx->tmbo; while ((ccb = sc->sc_waiting_ccb.tqh_first) != NULL) { if (sc->sc_mbofull >= AHA_MBX_SIZE) { aha_collect_mbo(sc); if (sc->sc_mbofull >= AHA_MBX_SIZE) { struct aha_toggle toggle; toggle.cmd.opcode = AHA_MBO_INTR_EN; toggle.cmd.enable = 1; aha_cmd(iot, ioh, sc, sizeof(toggle.cmd), (u_char *)&toggle.cmd, 0, (u_char *)0); break; } } TAILQ_REMOVE(&sc->sc_waiting_ccb, ccb, chain); #ifdef AHADIAG ccb->flags |= CCB_SENDING; #endif /* Link ccb to mbo. */ ltophys(sc->sc_dmamap_control->dm_segs[0].ds_addr + AHA_CCB_OFF(ccb), wmbo->ccb_addr); if (ccb->flags & CCB_ABORT) wmbo->cmd = AHA_MBO_ABORT; else wmbo->cmd = AHA_MBO_START; bus_dmamap_sync(sc->sc_dmat, sc->sc_dmamap_control, AHA_MBO_OFF(wmbo), sizeof(struct aha_mbx_out), BUS_DMASYNC_PREREAD|BUS_DMASYNC_PREWRITE); /* Tell the card to poll immediately. */ bus_space_write_1(iot, ioh, AHA_CMD_PORT, AHA_START_SCSI); if ((ccb->xs->xs_control & XS_CTL_POLL) == 0) callout_reset(&ccb->xs->xs_callout, mstohz(ccb->timeout), aha_timeout, ccb); ++sc->sc_mbofull; aha_nextmbx(wmbo, wmbx, mbo); } wmbx->tmbo = wmbo; } /* * We have a ccb which has been processed by the * adaptor, now we look to see how the operation * went. Wake up the owner if waiting */ static void aha_done(struct aha_softc *sc, struct aha_ccb *ccb) { bus_dma_tag_t dmat = sc->sc_dmat; struct scsi_sense_data *s1, *s2; struct scsipi_xfer *xs = ccb->xs; SC_DEBUG(xs->xs_periph, SCSIPI_DB2, ("aha_done\n")); /* * If we were a data transfer, unload the map that described * the data buffer. */ if (xs->datalen) { bus_dmamap_sync(dmat, ccb->dmamap_xfer, 0, ccb->dmamap_xfer->dm_mapsize, (xs->xs_control & XS_CTL_DATA_IN) ? BUS_DMASYNC_POSTREAD : BUS_DMASYNC_POSTWRITE); bus_dmamap_unload(dmat, ccb->dmamap_xfer); } /* * Otherwise, put the results of the operation * into the xfer and call whoever started it */ #ifdef AHADIAG if (ccb->flags & CCB_SENDING) { printf("%s: exiting ccb still in transit!\n", device_xname(sc->sc_dev)); Debugger(); return; } #endif if ((ccb->flags & CCB_ALLOC) == 0) { printf("%s: exiting ccb not allocated!\n", device_xname(sc->sc_dev)); Debugger(); return; } if (xs->error == XS_NOERROR) { if (ccb->host_stat != AHA_OK) { switch (ccb->host_stat) { case AHA_SEL_TIMEOUT: /* No response */ xs->error = XS_SELTIMEOUT; break; default: /* Other scsi protocol messes */ printf("%s: host_stat %x\n", device_xname(sc->sc_dev), ccb->host_stat); xs->error = XS_DRIVER_STUFFUP; break; } } else if (ccb->target_stat != SCSI_OK) { switch (ccb->target_stat) { case SCSI_CHECK: s1 = (struct scsi_sense_data *) (((char *)(&ccb->scsi_cmd)) + ccb->scsi_cmd_length); s2 = &xs->sense.scsi_sense; *s2 = *s1; xs->error = XS_SENSE; break; case SCSI_BUSY: xs->error = XS_BUSY; break; default: printf("%s: target_stat %x\n", device_xname(sc->sc_dev), ccb->target_stat); xs->error = XS_DRIVER_STUFFUP; break; } } else xs->resid = 0; } aha_free_ccb(sc, ccb); scsipi_done(xs); } /* * Find the board and find its irq/drq */ int aha_find(bus_space_tag_t iot, bus_space_handle_t ioh, struct aha_probe_data *sc) { int i; u_char sts; struct aha_config config; int irq, drq; /* * assume invalid status means the board is not present. */ sts = bus_space_read_1(iot, ioh, AHA_STAT_PORT); if (sts == 0) return (0); if ((sts & (AHA_STAT_STST|AHA_STAT_RSVD|AHA_STAT_CDF)) != 0) return (0); sts = bus_space_read_1(iot, ioh, AHA_INTR_PORT); if ((sts & AHA_INTR_RSVD) != 0) return (0); /* * reset board, If it doesn't respond, assume * that it's not there.. good for the probe */ bus_space_write_1(iot, ioh, AHA_CTRL_PORT, AHA_CTRL_HRST | AHA_CTRL_SRST); delay(100); for (i = AHA_RESET_TIMEOUT; i; i--) { sts = bus_space_read_1(iot, ioh, AHA_STAT_PORT); if (sts == (AHA_STAT_IDLE | AHA_STAT_INIT)) break; delay(1000); /* calibrated in msec */ } if (!i) { #ifdef AHADEBUG if (aha_debug) printf("aha_find: No answer from adaptec board\n"); #endif /* AHADEBUG */ return (0); } /* * setup DMA channel from jumpers and save int * level */ delay(1000); /* for Bustek 545 */ config.cmd.opcode = AHA_INQUIRE_CONFIG; aha_cmd(iot, ioh, (struct aha_softc *)0, sizeof(config.cmd), (u_char *)&config.cmd, sizeof(config.reply), (u_char *)&config.reply); switch (config.reply.chan) { case EISADMA: drq = -1; break; case CHAN0: drq = 0; break; case CHAN5: drq = 5; break; case CHAN6: drq = 6; break; case CHAN7: drq = 7; break; default: printf("aha_find: illegal drq setting %x\n", config.reply.chan); return (0); } switch (config.reply.intr) { case INT9: irq = 9; break; case INT10: irq = 10; break; case INT11: irq = 11; break; case INT12: irq = 12; break; case INT14: irq = 14; break; case INT15: irq = 15; break; default: printf("aha_find: illegal irq setting %x\n", config.reply.intr); return (0); } if (sc) { sc->sc_irq = irq; sc->sc_drq = drq; sc->sc_scsi_dev = config.reply.scsi_dev; } return (1); } /* * Start the board, ready for normal operation */ static int aha_init(struct aha_softc *sc) { bus_space_tag_t iot = sc->sc_iot; bus_space_handle_t ioh = sc->sc_ioh; bus_dma_segment_t seg; struct aha_devices devices; struct aha_setup setup; struct aha_mailbox mailbox; int error, i, j, initial_ccbs, rseg; /* * XXX * If we are a 1542C or later, disable the extended BIOS so that the * mailbox interface is unlocked. * No need to check the extended BIOS flags as some of the * extensions that cause us problems are not flagged in that byte. */ if (!strncmp(sc->sc_model, "1542C", 5)) { struct aha_extbios extbios; struct aha_unlock unlock; printf("%s: unlocking mailbox interface\n", device_xname(sc->sc_dev)); extbios.cmd.opcode = AHA_EXT_BIOS; aha_cmd(iot, ioh, sc, sizeof(extbios.cmd), (u_char *)&extbios.cmd, sizeof(extbios.reply), (u_char *)&extbios.reply); #ifdef AHADEBUG printf("%s: flags=%02x, mailboxlock=%02x\n", device_xname(sc->sc_dev), extbios.reply.flags, extbios.reply.mailboxlock); #endif /* AHADEBUG */ unlock.cmd.opcode = AHA_MBX_ENABLE; unlock.cmd.junk = 0; unlock.cmd.magic = extbios.reply.mailboxlock; aha_cmd(iot, ioh, sc, sizeof(unlock.cmd), (u_char *)&unlock.cmd, 0, (u_char *)0); } #if 0 /* * Change the bus on/off times to not clash with other DMA users. */ aha_cmd(iot, ioh, 1, 0, 0, 0, AHA_BUS_ON_TIME_SET, 7); aha_cmd(iot, ioh, 1, 0, 0, 0, AHA_BUS_OFF_TIME_SET, 4); #endif /* Inquire Installed Devices (to force synchronous negotiation). */ devices.cmd.opcode = AHA_INQUIRE_DEVICES; aha_cmd(iot, ioh, sc, sizeof(devices.cmd), (u_char *)&devices.cmd, sizeof(devices.reply), (u_char *)&devices.reply); /* Count installed units */ initial_ccbs = 0; for (i = 0; i < 8; i++) { for (j = 0; j < 8; j++) { if (((devices.reply.lun_map[i] >> j) & 1) == 1) initial_ccbs += 1; } } initial_ccbs *= 2; if (initial_ccbs > AHA_CCB_MAX) initial_ccbs = AHA_CCB_MAX; if (initial_ccbs == 0) /* yes, this can happen */ initial_ccbs = 2; /* Obtain setup information from. */ setup.cmd.opcode = AHA_INQUIRE_SETUP; setup.cmd.len = sizeof(setup.reply); aha_cmd(iot, ioh, sc, sizeof(setup.cmd), (u_char *)&setup.cmd, sizeof(setup.reply), (u_char *)&setup.reply); printf("%s: %s, %s\n", device_xname(sc->sc_dev), setup.reply.sync_neg ? "sync" : "async", setup.reply.parity ? "parity" : "no parity"); for (i = 0; i < 8; i++) { if (!setup.reply.sync[i].valid || (!setup.reply.sync[i].offset && !setup.reply.sync[i].period)) continue; printf("%s targ %d: sync, offset %d, period %dnsec\n", device_xname(sc->sc_dev), i, setup.reply.sync[i].offset, setup.reply.sync[i].period * 50 + 200); } /* * Allocate the mailbox and control blocks. */ if ((error = bus_dmamem_alloc(sc->sc_dmat, sizeof(struct aha_control), PAGE_SIZE, 0, &seg, 1, &rseg, BUS_DMA_NOWAIT)) != 0) { aprint_error_dev(sc->sc_dev, "unable to allocate control structures, " "error = %d\n", error); return (error); } if ((error = bus_dmamem_map(sc->sc_dmat, &seg, rseg, sizeof(struct aha_control), (void **)&sc->sc_control, BUS_DMA_NOWAIT|BUS_DMA_COHERENT)) != 0) { aprint_error_dev(sc->sc_dev, "unable to map control structures, error = %d\n", error); return (error); } /* * Create and load the DMA map used for the mailbox and * control blocks. */ if ((error = bus_dmamap_create(sc->sc_dmat, sizeof(struct aha_control), 1, sizeof(struct aha_control), 0, BUS_DMA_NOWAIT, &sc->sc_dmamap_control)) != 0) { aprint_error_dev(sc->sc_dev, "unable to create control DMA map, error = %d\n", error); return (error); } if ((error = bus_dmamap_load(sc->sc_dmat, sc->sc_dmamap_control, sc->sc_control, sizeof(struct aha_control), NULL, BUS_DMA_NOWAIT)) != 0) { aprint_error_dev(sc->sc_dev, "unable to load control DMA map, error = %d\n", error); return (error); } /* * Initialize the control blocks. */ i = aha_create_ccbs(sc, sc->sc_control->ac_ccbs, initial_ccbs); if (i == 0) { aprint_error_dev(sc->sc_dev, "unable to create control blocks\n"); return (ENOMEM); } else if (i != initial_ccbs) { printf("%s: WARNING: only %d of %d control blocks created\n", device_xname(sc->sc_dev), i, initial_ccbs); } sc->sc_adapter.adapt_openings = i; sc->sc_adapter.adapt_max_periph = sc->sc_adapter.adapt_openings; /* * Set up initial mail box for round-robin operation. */ for (i = 0; i < AHA_MBX_SIZE; i++) { wmbx->mbo[i].cmd = AHA_MBO_FREE; bus_dmamap_sync(sc->sc_dmat, sc->sc_dmamap_control, AHA_MBO_OFF(&wmbx->mbo[i]), sizeof(struct aha_mbx_out), BUS_DMASYNC_PREREAD|BUS_DMASYNC_PREWRITE); wmbx->mbi[i].stat = AHA_MBI_FREE; bus_dmamap_sync(sc->sc_dmat, sc->sc_dmamap_control, AHA_MBI_OFF(&wmbx->mbi[i]), sizeof(struct aha_mbx_in), BUS_DMASYNC_PREREAD|BUS_DMASYNC_PREWRITE); } wmbx->cmbo = wmbx->tmbo = &wmbx->mbo[0]; wmbx->tmbi = &wmbx->mbi[0]; sc->sc_mbofull = 0; /* Initialize mail box. */ mailbox.cmd.opcode = AHA_MBX_INIT; mailbox.cmd.nmbx = AHA_MBX_SIZE; ltophys(sc->sc_dmamap_control->dm_segs[0].ds_addr + offsetof(struct aha_control, ac_mbx), mailbox.cmd.addr); aha_cmd(iot, ioh, sc, sizeof(mailbox.cmd), (u_char *)&mailbox.cmd, 0, (u_char *)0); return (0); } static void aha_inquire_setup_information(struct aha_softc *sc) { bus_space_tag_t iot = sc->sc_iot; bus_space_handle_t ioh = sc->sc_ioh; struct aha_revision revision; u_char sts; int i; char *p; strcpy(sc->sc_model, "unknown"); /* * Assume we have a board at this stage, do an adapter inquire * to find out what type of controller it is. If the command * fails, we assume it's either a crusty board or an old 1542 * clone, and skip the board-specific stuff. */ revision.cmd.opcode = AHA_INQUIRE_REVISION; if (aha_cmd(iot, ioh, sc, sizeof(revision.cmd), (u_char *)&revision.cmd, sizeof(revision.reply), (u_char *)&revision.reply)) { /* * aha_cmd() already started the reset. It's not clear we * even need to bother here. */ for (i = AHA_RESET_TIMEOUT; i; i--) { sts = bus_space_read_1(iot, ioh, AHA_STAT_PORT); if (sts == (AHA_STAT_IDLE | AHA_STAT_INIT)) break; delay(1000); } if (!i) { #ifdef AHADEBUG printf("aha_init: soft reset failed\n"); #endif /* AHADEBUG */ return; } #ifdef AHADEBUG printf("aha_init: inquire command failed\n"); #endif /* AHADEBUG */ goto noinquire; } #ifdef AHADEBUG printf("%s: inquire %x, %x, %x, %x\n", device_xname(sc->sc_dev), revision.reply.boardid, revision.reply.spec_opts, revision.reply.revision_1, revision.reply.revision_2); #endif /* AHADEBUG */ switch (revision.reply.boardid) { case BOARD_1540_16HEAD_BIOS: case BOARD_1540_64HEAD_BIOS: case BOARD_1540: strcpy(sc->sc_model, "1540"); break; case BOARD_1542: strcpy(sc->sc_model, "1540A/1542A/1542B"); break; case BOARD_1640: strcpy(sc->sc_model, "1640"); break; case BOARD_1740: strcpy(sc->sc_model, "1740"); break; case BOARD_1542C: strcpy(sc->sc_model, "1542C"); break; case BOARD_1542CF: strcpy(sc->sc_model, "1542CF"); break; case BOARD_1542CP: strcpy(sc->sc_model, "1542CP"); break; } p = sc->sc_firmware; *p++ = revision.reply.revision_1; *p++ = '.'; *p++ = revision.reply.revision_2; *p = '\0'; noinquire: printf("%s: model AHA-%s, firmware %s\n", device_xname(sc->sc_dev), sc->sc_model, sc->sc_firmware); } static void ahaminphys(struct buf *bp) { if (bp->b_bcount > AHA_MAXXFER) bp->b_bcount = AHA_MAXXFER; minphys(bp); } /* * start a scsi operation given the command and the data address. Also needs * the unit, target and lu. */ static void aha_scsipi_request(struct scsipi_channel *chan, scsipi_adapter_req_t req, void *arg) { struct scsipi_xfer *xs; struct scsipi_periph *periph; struct aha_softc *sc = device_private(chan->chan_adapter->adapt_dev); bus_dma_tag_t dmat = sc->sc_dmat; struct aha_ccb *ccb; int error, seg, flags, s; switch (req) { case ADAPTER_REQ_RUN_XFER: xs = arg; periph = xs->xs_periph; flags = xs->xs_control; SC_DEBUG(periph, SCSIPI_DB2, ("aha_scsipi_request\n")); /* Get a CCB to use. */ ccb = aha_get_ccb(sc); #ifdef DIAGNOSTIC /* * This should never happen as we track the resources * in the mid-layer. */ if (ccb == NULL) { scsipi_printaddr(periph); printf("unable to allocate ccb\n"); panic("aha_scsipi_request"); } #endif ccb->xs = xs; ccb->timeout = xs->timeout; /* * Put all the arguments for the xfer in the ccb */ if (flags & XS_CTL_RESET) { ccb->opcode = AHA_RESET_CCB; ccb->scsi_cmd_length = 0; } else { /* can't use S/G if zero length */ if (xs->cmdlen > sizeof(ccb->scsi_cmd)) { printf("%s: cmdlen %d too large for CCB\n", device_xname(sc->sc_dev), xs->cmdlen); xs->error = XS_DRIVER_STUFFUP; goto out_bad; } ccb->opcode = (xs->datalen ? AHA_INIT_SCAT_GATH_CCB : AHA_INITIATOR_CCB); memcpy(&ccb->scsi_cmd, xs->cmd, ccb->scsi_cmd_length = xs->cmdlen); } if (xs->datalen) { /* * Map the DMA transfer. */ #ifdef TFS if (flags & XS_CTL_DATA_UIO) { error = bus_dmamap_load_uio(dmat, ccb->dmamap_xfer, (struct uio *)xs->data, ((flags & XS_CTL_NOSLEEP) ? BUS_DMA_NOWAIT : BUS_DMA_WAITOK) | BUS_DMA_STREAMING | ((flags & XS_CTL_DATA_IN) ? BUS_DMA_READ : BUS_DMA_WRITE)); } else #endif { error = bus_dmamap_load(dmat, ccb->dmamap_xfer, xs->data, xs->datalen, NULL, ((flags & XS_CTL_NOSLEEP) ? BUS_DMA_NOWAIT : BUS_DMA_WAITOK) | BUS_DMA_STREAMING | ((flags & XS_CTL_DATA_IN) ? BUS_DMA_READ : BUS_DMA_WRITE)); } switch (error) { case 0: break; case ENOMEM: case EAGAIN: xs->error = XS_RESOURCE_SHORTAGE; goto out_bad; default: xs->error = XS_DRIVER_STUFFUP; if (error == EFBIG) { printf("%s: aha_scsi_cmd, more than %d" " DMA segments\n", device_xname(sc->sc_dev), AHA_NSEG); } else { aprint_error_dev(sc->sc_dev, "error %d loading DMA map\n", error); } out_bad: aha_free_ccb(sc, ccb); scsipi_done(xs); return; } bus_dmamap_sync(dmat, ccb->dmamap_xfer, 0, ccb->dmamap_xfer->dm_mapsize, (flags & XS_CTL_DATA_IN) ? BUS_DMASYNC_PREREAD : BUS_DMASYNC_PREWRITE); /* * Load the hardware scatter/gather map with the * contents of the DMA map. */ for (seg = 0; seg < ccb->dmamap_xfer->dm_nsegs; seg++) { ltophys(ccb->dmamap_xfer->dm_segs[seg].ds_addr, ccb->scat_gath[seg].seg_addr); ltophys(ccb->dmamap_xfer->dm_segs[seg].ds_len, ccb->scat_gath[seg].seg_len); } ltophys(sc->sc_dmamap_control->dm_segs[0].ds_addr + AHA_CCB_OFF(ccb) + offsetof(struct aha_ccb, scat_gath), ccb->data_addr); ltophys(ccb->dmamap_xfer->dm_nsegs * sizeof(struct aha_scat_gath), ccb->data_length); } else { /* * No data xfer, use non S/G values. */ ltophys(0, ccb->data_addr); ltophys(0, ccb->data_length); } ccb->data_out = 0; ccb->data_in = 0; ccb->target = periph->periph_target; ccb->lun = periph->periph_lun; ccb->req_sense_length = sizeof(ccb->scsi_sense); ccb->host_stat = 0x00; ccb->target_stat = 0x00; ccb->link_id = 0; ltophys(0, ccb->link_addr); bus_dmamap_sync(sc->sc_dmat, sc->sc_dmamap_control, AHA_CCB_OFF(ccb), sizeof(struct aha_ccb), BUS_DMASYNC_PREREAD|BUS_DMASYNC_PREWRITE); s = splbio(); aha_queue_ccb(sc, ccb); splx(s); SC_DEBUG(periph, SCSIPI_DB3, ("cmd_sent\n")); if ((flags & XS_CTL_POLL) == 0) return; /* Not allowed to use interrupts, poll for completion. */ if (aha_poll(sc, xs, ccb->timeout)) { aha_timeout(ccb); if (aha_poll(sc, xs, ccb->timeout)) aha_timeout(ccb); } return; case ADAPTER_REQ_GROW_RESOURCES: /* XXX Not supported. */ return; case ADAPTER_REQ_SET_XFER_MODE: /* * Can't really do this on the Adaptec; it has * its own config mechanism, but we do know how * to query what the firmware negotiated. */ /* XXX XXX XXX */ return; } } /* * Poll a particular unit, looking for a particular xs */ static int aha_poll(struct aha_softc *sc, struct scsipi_xfer *xs, int count) { bus_space_tag_t iot = sc->sc_iot; bus_space_handle_t ioh = sc->sc_ioh; /* timeouts are in msec, so we loop in 1000 usec cycles */ while (count) { /* * If we had interrupts enabled, would we * have got an interrupt? */ if (bus_space_read_1(iot, ioh, AHA_INTR_PORT) & AHA_INTR_ANYINTR) aha_intr(sc); if (xs->xs_status & XS_STS_DONE) return (0); delay(1000); /* only happens in boot so ok */ count--; } return (1); } static void aha_timeout(void *arg) { struct aha_ccb *ccb = arg; struct scsipi_xfer *xs = ccb->xs; struct scsipi_periph *periph = xs->xs_periph; struct aha_softc *sc = device_private(periph->periph_channel->chan_adapter->adapt_dev); int s; scsipi_printaddr(periph); printf("timed out"); s = splbio(); #ifdef AHADIAG /* * If The ccb's mbx is not free, then the board has gone south? */ aha_collect_mbo(sc); if (ccb->flags & CCB_SENDING) { aprint_error_dev(sc->sc_dev, "not taking commands!\n"); Debugger(); } #endif /* * If it has been through before, then * a previous abort has failed, don't * try abort again */ if (ccb->flags & CCB_ABORT) { /* abort timed out */ printf(" AGAIN\n"); /* XXX Must reset! */ } else { /* abort the operation that has timed out */ printf("\n"); ccb->xs->error = XS_TIMEOUT; ccb->timeout = AHA_ABORT_TIMEOUT; ccb->flags |= CCB_ABORT; aha_queue_ccb(sc, ccb); } splx(s); }