/* $NetBSD: ihavar.h,v 1.13 2008/05/14 13:29:28 tsutsui Exp $ */ /*- * Copyright (c) 2001, 2002 Izumi Tsutsui * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ /*- * Device driver for the INI-9XXXU/UW or INIC-940/950 PCI SCSI Controller. * * Written for 386bsd and FreeBSD by * Winston Hung * * Copyright (c) 1997-1999 Initio Corp. * Copyright (c) 2000 Ken Westerback * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer, * without modification, immediately at the beginning of the file. * 2. The name of the author may not be used to endorse or promote products * derived from this software without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. * IN NO EVENT SHALL THE AUTHOR OR HIS RELATIVES BE LIABLE FOR ANY DIRECT, * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR * SERVICES; LOSS OF MIND, USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF * THE POSSIBILITY OF SUCH DAMAGE. */ /* * Ported to NetBSD by Izumi Tsutsui from OpenBSD: * $OpenBSD: iha.h,v 1.2 2001/02/08 17:35:05 krw Exp $ */ #define IHA_MAX_SG_ENTRIES (MAXPHYS / PAGE_SIZE + 1) #define IHA_MAX_TARGETS 16 #define IHA_MAX_SCB 32 #define IHA_MAX_EXTENDED_MSG 4 /* SDTR(3) and WDTR(4) only */ #define IHA_MAX_OFFSET 15 #define SCSI_CONDITION_MET 0x04 /* SCSI Status codes not defined */ #define SCSI_INTERM_COND_MET 0x14 /* in scsi_all.h */ /* * Scatter-Gather Element Structure */ struct iha_sg_element { uint32_t sg_addr; /* Data Pointer */ uint32_t sg_len; /* Data Length */ }; #define IHA_SG_SIZE (sizeof(struct iha_sg_element) * IHA_MAX_SG_ENTRIES) /* * iha_scb - SCSI Request structure used by the * Tulip (aka inic-940/950). */ struct iha_scb { TAILQ_ENTRY(iha_scb) chain; bus_dmamap_t dmap; /* maps xs->buf xfer buffer */ int status; /* Current status of the SCB */ #define STATUS_QUEUED 0 /* SCB one of Free/Done/Pend */ #define STATUS_RENT 1 /* SCB allocated, not queued */ #define STATUS_SELECT 2 /* SCB being selected */ #define STATUS_BUSY 3 /* SCB I/O is active */ int nextstat; /* Next state function to apply */ int sg_index; /* Scatter/Gather Index */ int sg_max; /* Scatter/Gather # valid entries */ int flags; /* SCB Flags */ #define FLAG_DATAIN 0x00000001 /* Data In */ #define FLAG_DATAOUT 0x00000002 /* Data Out */ #define FLAG_RSENS 0x00000004 /* Request Sense sent */ #define FLAG_SG 0x00000008 /* Scatter/Gather used */ int target; /* Target Id */ int lun; /* Lun */ uint32_t bufaddr; /* Data Buffer Physical Addr */ uint32_t buflen; /* Data Allocation Length */ int ha_stat; /* Status of Host Adapter */ #define HOST_OK 0x00 /* OK - operation a success */ #define HOST_TIMED_OUT 0x01 /* Request timed out */ #define HOST_SPERR 0x10 /* SCSI parity error */ #define HOST_SEL_TOUT 0x11 /* Selection Timeout */ #define HOST_DO_DU 0x12 /* Data Over/Underrun */ #define HOST_BAD_PHAS 0x14 /* Unexpected SCSI bus phase */ #define HOST_SCSI_RST 0x1B /* SCSI bus was reset */ #define HOST_DEV_RST 0x1C /* Device was reset */ int ta_stat; /* SCSI Status Byte */ struct scsipi_xfer *xs; /* xs this SCB is executing */ struct tcs *tcs; /* tcs for SCB_Target */ struct iha_sg_element *sglist; bus_size_t sgoffset; /* xfer buf offset */ int sg_size; /* # of valid entries in sg_list */ uint32_t sg_addr; /* SGList Physical Address */ int cmdlen; /* CDB Length */ uint8_t cmd[12]; /* SCSI Command */ uint8_t scb_id; /* Identity Message */ uint8_t scb_tagmsg; /* Tag Message */ uint8_t scb_tagid; /* Queue Tag */ }; /* * Target Device Control Structure */ struct tcs { int flags; #define FLAG_SCSI_RATE 0x0007 /* Index into iha_rate_tbl[] */ #define FLAG_EN_DISC 0x0008 /* Enable disconnect */ #define FLAG_NO_SYNC 0x0010 /* No sync data transfer */ #define FLAG_NO_WIDE 0x0020 /* No wide data transfer */ #define FLAG_1GIGA 0x0040 /* 255 hd/63 sec (64/32) */ #define FLAG_SPINUP 0x0080 /* Start disk drive */ #define FLAG_WIDE_DONE 0x0100 /* WDTR msg has been sent */ #define FLAG_SYNC_DONE 0x0200 /* SDTR msg has been sent */ #define FLAG_NO_NEG_SYNC (FLAG_NO_SYNC | FLAG_SYNC_DONE) #define FLAG_NO_NEG_WIDE (FLAG_NO_WIDE | FLAG_WIDE_DONE) int period; int offset; int tagcnt; struct iha_scb *ntagscb; uint8_t syncm; uint8_t sconfig0; }; struct iha_softc { device_t sc_dev; bus_space_tag_t sc_iot; bus_space_handle_t sc_ioh; bus_dma_tag_t sc_dmat; bus_dmamap_t sc_dmamap; struct scsipi_adapter sc_adapter; struct scsipi_channel sc_channel; int sc_id; void *sc_ih; /* * Initio specific fields */ int sc_flags; #define FLAG_EXPECT_DISC 0x01 #define FLAG_EXPECT_SELECT 0x02 #define FLAG_EXPECT_RESET 0x10 #define FLAG_EXPECT_DONE_DISC 0x20 int sc_semaph; #define SEMAPH_IN_MAIN 0x00 /* Already in tulip_main */ int sc_phase; /* MSG C/D I/O */ #define PHASE_DATA_OUT 0x00 /* 0 0 0 */ #define PHASE_DATA_IN 0x01 /* 0 0 1 */ #define PHASE_CMD_OUT 0x02 /* 0 1 0 */ #define PHASE_STATUS_IN 0x03 /* 0 1 1 */ #define PHASE_MSG_OUT 0x06 /* 1 1 0 */ #define PHASE_MSG_IN 0x07 /* 1 1 1 */ struct iha_scb *sc_scb; /* SCB array */ struct iha_scb *sc_actscb; /* SCB using SCSI bus */ struct iha_sg_element *sc_sglist; TAILQ_HEAD(, iha_scb) sc_freescb, sc_pendscb, sc_donescb; struct tcs sc_tcs[IHA_MAX_TARGETS]; uint8_t sc_msg[IHA_MAX_EXTENDED_MSG]; /* [0] len, [1] Msg Code */ uint8_t sc_sistat; uint8_t sc_status0; uint8_t sc_status1; uint8_t sc_sconf1; }; /* * EEPROM for one SCSI Channel */ #define EEPROM_SIZE 32 #define EEP_LBYTE(x) ((x) & 0xff) #define EEP_HBYTE(x) ((x) >> 8) #define EEP_WORD(l, h) (((h) & 0xff) << 8 | ((l) && 0xff)) #define EEP_WAIT() DELAY(5) struct eeprom_adapter { uint16_t config1; /* 0x00 Channel Adapter SCSI Id */ #define CFG_ID_MASK 0x000f #define CFG_ID(cfg) ((cfg) & CFG_ID_MASK) #define CFG_SCSI_RESET 0x0100 /* Reset bus at power up */ #define CFG_EN_PAR 0x0200 /* SCSI parity enable */ #define CFG_ACT_TERM1 0x0400 /* Enable active term 1 */ #define CFG_ACT_TERM2 0x0800 /* Enable active term 2 */ #define CFG_AUTO_TERM 0x1000 /* Enable auto terminator */ #define CFG_EN_PWR 0x8000 /* Enable power mgmt */ #define CFG_DEFAULT (CFG_SCSI_RESET | CFG_AUTO_TERM | CFG_EN_PAR) uint16_t config2; #define CFG_CFG2(x) EEP_LBYTE(x) /* 0x02 Unused Channel Cfg byte 2*/ #define CFG_TARGET(x) EEP_HBYTE(x) /* 0x03 Number of SCSI targets */ /* 0x04 Lower bytes of targ flags*/ uint16_t tflags[IHA_MAX_TARGETS / sizeof(uint16_t)]; #define FLAG_DEFAULT (FLAG_NO_WIDE | FLAG_1GIGA | FLAG_EN_DISC) }; /* * Tulip (aka ini-940/950) Serial EEPROM Layout */ struct iha_eeprom { /* ---------- Header ------------------------------------------------*/ uint16_t signature; /* 0x00 NVRAM Signature */ #define EEP_SIGNATURE 0xC925 uint16_t revision; #define EEP_SIZE(x) EEP_LBYTE(x) /* 0x02 Size of data structure*/ #define EEP_REV(x) EEP_HBYTE(x) /* 0x03 Rev. of data structure*/ /* ---------- Host Adapter Structure --------------------------------*/ uint16_t model; /* 0x04 Model number */ uint16_t modelinfo; #define EEP_INFO(x) EEP_LBYTE(x) /* 0x06 Model information */ #define EEP_CHAN(x) EEP_HBYTE(x) /* 0x07 Number of SCSI channel*/ uint16_t bioscfg; /* 0x08 BIOS configuration 1 */ #define EEP_BIOSCFG_ENABLE 0x0001 /* BIOS enable */ #define EEP_BIOSCFG_8DRIVE 0x0002 /* Support > 2 drives */ #define EEP_BIOSCFG_REMOVABLE 0x0004 /* Support removable drv */ #define EEP_BIOSCFG_INT19 0x0008 /* Intercept int 19h */ #define EEP_BIOSCFG_BIOSSCAN 0x0010 /* Dynamic BIOS scan */ #define EEP_BIOSCFG_LUNSUPPORT 0x0040 /* Support LUN */ #define EEP_BIOSCFG_DEFAULT EEP_BIOSCFG_ENABLE uint16_t hacfg; /* 0x0a Host adapter config 1 */ #define EEP_HACFG_BOOTIDMASK 0x000F /* Boot ID number */ #define EEP_HACFG_LUNMASK 0x0070 /* Boot LUN number */ #define EEP_HACFG_CHANMASK 0x0080 /* Boot Channel number */ struct eeprom_adapter adapter[2]; /* 0x0c */ uint16_t reserved[5]; /* 0x34 */ /* --------- CheckSum -----------------------------------------------*/ uint16_t checksum; /* 0x3E Checksum of NVRam */ }; /* Functions used by higher SCSI layers, the kernel, or iha.c and iha_pci.c */ int iha_intr(void *); void iha_attach(struct iha_softc *);