/* $NetBSD: rrunnerreg.h,v 1.9 2008/04/28 20:23:51 martin Exp $ */ /* * Copyright (c) 1997, 1998 The NetBSD Foundation, Inc. * All rights reserved. * * This code contributed to The NetBSD Foundation by Kevin M. Lahey * of the Numerical Aerospace Simulation Facility, NASA Ames Research * Center. * * Partially based on a HIPPI driver written by Essential Communications * Corporation. Thanks to Jason Thorpe, Matt Jacob, and Fred Templin * for invaluable advice and encouragement! * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE * POSSIBILITY OF SUCH DAMAGE. */ /* * Description of RoadRunner registers and hardware constructs. * * We're trying to support version 1 AND version 2 of the RunCode. * The fields that changed for version 2 are prefixed with RR2_ instead * of RR_. If version 1 disappears (it is currently deprecated), * we can remove compatibility, but it seems a shame to lose functionality * for no good reason. */ /* PCI registers */ #define RR_PCI_BIST 0x0c /* Built-In Self Test */ /* General control registers */ #define RR_MISC_HOST_CTL 0x40 /* Misc. Host Control */ #define RR_MISC_LOCAL_CTL 0x44 /* Misc. Local Control */ #define RR_PROC_PC 0x48 /* i960 program counter */ #define RR_PROC_BREAKPT 0x4c /* set breakpoint on i960 */ #define RR_TIMER 0x54 /* clock */ #define RR_TIMER_REF 0x58 /* When this matches the TIMER, interrupt */ #define RR_PCI_STATE 0x5c /* misc configuration */ #define RR_MAIN_EVENT 0x60 /* main event register for i960 & RoadRunner */ #define RR_WINDOW_BASE 0x68 /* pointer to internal memory*/ #define RR_WINDOW_DATA 0x6c /* value of mem at WINDOW_BASE */ #define RR_RX_STATE 0x70 /* HIPPI receiver state */ #define RR_TX_STATE 0x74 /* HIPPI transmitter state */ #define RR_EXT_SER_DATA 0x7c /* controls hardware besides RR on board */ /* Host DMA registers */ #define RR_WRITE_HOST 0x80 /* 64-bit pointer to data on host */ #define RR_READ_HOST 0x90 #define RR_WRITE_LENGTH 0x9c /* length of data to be moved */ #define RR_READ_LENGTH 0xac #define RR_DMA_WRITE_STATE 0xa0 /* controls DMA */ #define RR_DMA_READ_STATE 0xb0 #define RR_WRITE_DST 0xa4 /* Internal destination of DMA */ #define RR_READ_DST 0xb4 /* RunCode registers */ #define RR_EVENT_CONSUMER 0x200 /* index of consumer in event ring */ #define RR_SEND_PRODUCER 0x218 /* index of producer in sender ring */ #define RR_SNAP_RECV_PRODUCER 0x21c /* index of producer in SNAP ring */ #define RR_RECVS_PRODUCER 0x220 /* index of producer in recv rings */ #define RR_COMMAND_RING 0x240 /* set of 16 command ring elements */ #define RR_ULA 0x280 /* Universal LAN Address */ #define RR_RECV_RING_PTR 0x288 /* receive ring address */ #define RR_GEN_INFO_PTR 0x290 /* general info block address */ #define RR_MODE_AND_STATUS 0x298 /* operating mode and status */ #define RR_CONN_RETRY_COUNT 0x29c /* when no campon, try count */ #define RR_CONN_RETRY_TIMER 0x2a0 /* clock ticks to delay retry */ #define RR_CONN_TIMEOUT 0x2a4 /* campon delay timeout */ #define RR_STATS_TIMER 0x2a8 /* clock ticks between stats copy */ #define RR_MAX_RECV_RINGS 0x2ac /* max receive rings (RO) */ #define RR_INTERRUPT_TIMER 0x2b0 /* clock ticks between interrupts */ #define RR_TX_TIMEOUT 0x2b4 /* transmit data not moving timer */ #define RR_RX_TIMEOUT 0x2b8 /* receive data not moving timer */ #define RR_EVENT_PRODUCER 0x2bc /* index of producer in event ring */ #define RR_TRACE_INDEX 0x2c0 /* RunCode trace pointer */ #define RR_RUNCODE_FAIL1 0x2c4 /* failure codes */ #define RR_RUNCODE_FAIL2 0x2c8 #define RR_FILTER_LA 0x2d0 /* internal debug, filtering */ #define RR_RUNCODE_VERSION 0x2d4 /* RunCode version data */ #define RR_RUNCODE_RECV_CONS 0x300 /* Runcode receive ring consumption */ #define RR_DRIVER_RECV_CONS 0x320 /* Driver receive ring consumption */ #define RR_MEMORY_WINDOW 0x800 /* Memory window */ /* * Event codes */ /* General events */ #define RR_EC_RUNCODE_UP 0x01 #define RR_EC_WATCHDOG 0x02 #define RR_EC_TRACE 0x03 #define RR_EC_STATS_RETRIEVED 0x04 #define RR_EC_INVALID_CMD 0x05 #define RR_EC_SET_CMD_CONSUMER 0x06 #define RR_EC_LINK_ON 0x07 #define RR_EC_LINK_OFF 0x08 #define RR2_EC_INTERNAL_ERROR 0x09 #define RR_EC_INTERNAL_ERROR 0x0a #define RR2_EC_SOFTWARE_ERROR 0x0a #define RR_EC_STATS_UPDATE 0x0b #define RR_EC_REJECTING 0x0c /* Send events */ #define RR_EC_SET_SND_CONSUMER 0x10 #define RR_EC_PACKET_SENT 0x11 #define RR_EC_SEND_RING_LOW 0x12 #define RR_EC_CONN_REJECT 0x13 #define RR_EC_CAMPON_TIMEOUT 0x14 #define RR_EC_CONN_TIMEOUT 0x15 #define RR_EC_DISCONN_ERR 0x16 #define RR_EC_INTERNAL_PARITY 0x17 #define RR_EC_TX_IDLE 0x18 #define RR_EC_SEND_LINK_OFF 0x19 #define RR_EC_BAD_SEND_RING 0x1a #define RR_EC_BAD_SEND_BUF 0x1b #define RR_EC_BAD_SEND_DESC 0x1c /* Receive events */ #define RR_EC_RING_ENABLED 0x20 #define RR_EC_RING_ENABLE_ERR 0x21 #define RR_EC_RING_DISABLED 0x22 #define RR_EC_RECV_RING_LOW 0x23 #define RR_EC_RECV_RING_OUT 0x24 #define RR_EC_PACKET_DISCARDED 0x25 #define RR_EC_RECV_RING_FLUSH 0x26 #define RR_EC_RECV_ERROR_INFO 0x27 #define RR_EC_SET_RECV_CONSUMER 0x29 #define RR_EC_PACKET_RECVED 0x2a #define RR_EC_PARITY_ERR 0x2b #define RR_EC_LLRC_ERR 0x2c #define RR_EC_IP_HDR_CKSUM_ERR 0x2d #define RR_EC_DATA_CKSUM_ERR 0x2e #define RR_EC_SHORT_BURST_ERR 0x2f #define RR_EC_RECV_LINK_OFF 0x30 #define RR_EC_FLAG_SYNC_ERR 0x31 #define RR_EC_FRAME_ERR 0x32 #define RR_EC_RECV_IDLE 0x33 #define RR_EC_PKT_LENGTH_ERR 0x34 #define RR_EC_STATE_TRANS_ERR 0x35 #define RR_EC_NO_READY_PULSE 0x3c #define RR_EC_BAD_RECV_BUF 0x36 #define RR_EC_BAD_RECV_DESC 0x37 #define RR_EC_BAD_RECV_RING 0x38 #define RR_EC_NO_RING_FOR_ULP 0x3a #define RR_EC_OUT_OF_BUF 0x3b #define RR_EC_UNIMPLEMENTED 0x40 /* * Command codes */ #define RR_CC_START_RUNCODE 0x01 #define RR_CC_UPDATE_STATS 0x02 #define RR_CC_DISCONN_SRC 0x03 #define RR_CC_DISCONN_DST 0x04 #define RR_CC_WATCHDOG 0x05 #define RR_CC_TRACE 0x06 #define RR_CC_SET_SEND_PRODUCER 0x07 #define RR_CC_SET_RECV_PRODUCER 0x08 #define RR_CC_DISABLE_RING 0x09 #define RR_CC_ENABLE_RING 0x0a #define RR_CC_DISCARD_PKT 0x0b #define RR_CC_FLUSH_RECV_RING 0x0c /* unimplemented */ #define RR_CC_CONN_MGT 0x0d /* * Masks for registers */ /* Misc Host Control */ #define RR_MH_INTERRUPT 0x001 /* interrupt state */ #define RR_MH_CLEAR_INT 0x002 /* clear interrupt */ #define RR_MH_NO_SWAP 0x004 /* disable normal endian swap to host */ #define RR_MH_HALT_PROC 0x010 /* set to halt processor, clear to start */ #define RR_MH_STEP 0x020 /* set to single step processor */ #define RR_MH_PROC_HALT 0x100 /* indicates processor has been halted */ #define RR_MH_BAD_INSTR 0x200 /* indicates invalid instruction executed */ #define RR_MH_REVISION_MASK 0xf0000000 /* mask to retrieve revision code */ /* Misc Local Control */ #define RR_LC_CLEAR_INT 0x0002 /* clear interrupt */ #define RR_LC_FAST_PROM 0x0008 /* use fast EEPROM access */ #define RR_LC_ADD_SRAM 0x0100 /* > 1MB SRAM present */ #define RR_LC_ADD_HIPPI 0x0200 /* double number of HIPPI descriptors */ #define RR_LC_PARITY_ON 0x0400 /* enable local parity checking */ #define RR_LC_WRITE_PROM 0x1000 /* EEPROM write enable */ /* PCI State */ #define RR_PS_READ_MASK 0x1c #define RR_PS_READ_SHIFT 2 #define RR_PS_READ_DISABLE (0 << RR_PS_READ_SHIFT) #define RR_PS_READ_4 (1 << RR_PS_READ_SHIFT) #define RR_PS_READ_16 (2 << RR_PS_READ_SHIFT) #define RR_PS_READ_32 (3 << RR_PS_READ_SHIFT) #define RR_PS_READ_64 (4 << RR_PS_READ_SHIFT) #define RR_PS_READ_128 (5 << RR_PS_READ_SHIFT) #define RR_PS_READ_256 (6 << RR_PS_READ_SHIFT) #define RR_PS_READ_1024 (7 << RR_PS_READ_SHIFT) #define RR_PS_WRITE_MASK 0xe0 #define RR_PS_WRITE_SHIFT 5 #define RR_PS_WRITE_DISABLE (0 << RR_PS_WRITE_SHIFT) #define RR_PS_WRITE_4 (1 << RR_PS_WRITE_SHIFT) #define RR_PS_WRITE_16 (2 << RR_PS_WRITE_SHIFT) #define RR_PS_WRITE_32 (3 << RR_PS_WRITE_SHIFT) #define RR_PS_WRITE_64 (4 << RR_PS_WRITE_SHIFT) #define RR_PS_WRITE_128 (5 << RR_PS_WRITE_SHIFT) #define RR_PS_WRITE_256 (6 << RR_PS_WRITE_SHIFT) #define RR_PS_WRITE_1024 (7 << RR_PS_WRITE_SHIFT) #define RR_PS_MIN_DMA_MASK 0xff00 #define RR_PS_MIN_DMA_SHIFT 8 /* HIPPI Receive State */ #define RR_RS_ENABLE 0x01 /* enable new connections */ #define RR_RS_RESET 0x02 /* reset receive interface */ #define RR_RS_REJECT_NONE 0x00 /* don't ever reject connections */ #define RR_RS_REJECT_2K 0x20 /* reject if only 2KB free */ #define RR_RS_REJECT_4K 0x30 /* reject if only 4KB free */ #define RR_RS_REJECT_8K 0x40 /* reject if only 8KB free */ #define RR_RS_REJECT_16K 0x50 /* reject if only 16KB free */ #define RR_RS_REJECT_32K 0x60 /* reject if only 32KB free */ #define RR_RS_REJECT_64K 0x70 /* reject if only 64KB free */ /* HIPPI Transmit State */ #define RR_TS_ENABLE 0x01 /* enable transmit state machine */ #define RR_TS_PERMANENT 0x02 /* this connection permanent while set */ /* External Serial Data */ /* * This controls hardware that is external to the RoadRunner. * Bits 0-15 are set on write, 16-31 are read on read. */ #define RR_ES_TDAV 0x004 /* transmit data available */ #define RR_ES_LED1 0x008 /* LED1 control */ #define RR_ES_LED2 0x010 /* LED2 control */ #define RR_ES_RX_PERM 0x020 /* set permanent receive connection */ #define RR_ES_LEDAUTO 0x040 /* clear to let LED1 and LED2 control LEDs */ #define RR_ES_LLB_ENA 0x080 /* local loopback enable */ #define RR_ES_TP_START 0x100 /* test points (bits 8-13) */ #define RR_ES_REGINT 0x10000 /* interrupt from SEEQ-8100 (Gig-E) */ #define RR_ES_MISC 0x20000 /* misc input */ #define RR_ES_RXSIGDET 0x40000 /* fiber optic RXSIGDET output */ /* DMA Read State */ #define RR_DR_RESET 0x001 /* set to reset read DMA */ #define RR_DR_ACTIVE 0x008 /* set to start DMA */ #define RR_DR_THRESHOLD_MASK 0x1f0 /* mask off threshold values */ #define RR_DR_THRESHOLD_SHIFT 4 /* shift to set threshold values */ #define RR_DR_THRESHOLD_MAX 16 /* DMA Write State */ #define RR_DW_RESET 0x001 /* set to reset write DMA */ #define RR_DW_CKSUM 0x004 /* set to enable checksum calc on DMA */ #define RR_DW_ACTIVE 0x008 /* set to start DMA */ #define RR_DW_THRESHOLD_MASK 0x1f0 /* mask off threshold values */ #define RR_DW_THRESHOLD_SHIFT 4 /* shift to set threshold values */ #define RR_DW_THRESHOLD_MAX 18 /* Operating Mode and Status */ #define RR_MS_LOOPBACK 0x0001 /* loopback through the GLink hardware */ #define RR_MS_PH_MODE 0x0002 /* set for PH, clear for FP */ #define RR_MS_LONG_PTRS 0x0004 /* set indicates 64-bit pointers */ #define RR_MS_WORD_SWAP 0x0008 /* set to swap words in 64-bit pointers */ #define RR_MS_WARNINGS 0x0010 /* set to enable warning events */ #define RR_MS_ERR_TERM 0x0020 /* set to terminate connection on error */ #define RR_MS_DIRECT 0x0040 /* debug flag. enable filterLA checks */ #define RR_MS_NO_WATCHDOG 0x0080 /* set to disable watchdog */ #define RR_MS_SWAP_DATA 0x0100 /* set to byte swap data */ #define RR_MS_SWAP_CNTRL 0x0200 /* set to byte swap control structures */ #define RR_MS_ERR_HALT 0x0400 /* set to halt NIC on RunCode error */ #define RR_MS_NO_RESTART 0x0800 /* set to prevent NIC restart after error */ #define RR_MS_TX_HALFDUP 0x1000 /* NIC does half-duplex transmit */ #define RR_MS_RX_HALFDUP 0x2000 /* NIC does half-duplex receive */ #define RR_MS_GIG_E 0x4000 /* NIC does Gig-E instead of HIPPI */ #define RR_MS_FATAL_ERR 0x4000000 /* fatal error on NIC */ #define RR_MS_EVENT_OVER 0x8000000 /* event ring overflow */ /* Options field (top half of high word of ULA in RunCode) */ #define RR_OP_GIGE 0x01 /* Support for Gig-E NIC */ #define RR_OP_TRACED 0x02 /* Runcode generates debug traces */ #define RR_OP_1MEG 0x04 /* Support for 1MB of SRAM */ #define RR_OP_CDI 0x08 /* Support for Character Device Interace */ #define RR_OP_MSDOS 0x10 /* For testing RunCode under MS-DOS!? */ #define RR_OP_COMEV 0x20 /* New v2 Command/Event interface */ #define RR_OP_LONG_TX 0x40 /* Long transmit descr */ #define RR_OP_LONG_RX 0x80 /* Long receive descr (set when not CDI) */ /* * EEPROM locations * * The EEPROM layout is a little weird. There is a valid byte every * eight bytes. Words are then smeared out over 32 bytes. * All addresses listed here are the actual starting addresses. * The programmer is responsible for assembling a word from each of the * bytes available. * * NB: This is incomplete. I just ran out of patience for entering values. */ #define RR_EE_OFFSET 0x80000000 /* offset to the start of EEPROM mem */ #define RR_EE_WORD_LEN 0x20 /* jump between words in the EEPROM */ #define RR_EE_BYTE_LEN 0x08 /* jump between bytes in the EEPROM */ #define RR_EE_MAX_LEN 8192 /* maximum number of words in EEPROM */ #define RR_EE_SEG_SIZE 512 /* maximum size of a segment */ #define RR_EE_PROM_INIT 0x801ff00 /* jump here to start RunCode loader */ #define RR_EE_HEADER_FORMAT_MAGIC 1 /* version number we can handle*/ #define RR_EE_SRAM_SIZE 0x0040 /* SRAM size */ #define RR_EE_PHASE1_START 0x0060 /* target byte address in SRAM */ #define RR_EE_PHASE1_LEN 0x0080 /* length in words of phase 1 */ #define RR_EE_PHASE1_EE_START 0x00a0 /* address of phase 1 in EEPROM */ #define RR_EE_PCI_DEV_VEND 0x0100 /* PCI device/vendor */ #define RR_EE_PCI_REV_CLASS 0x0120 /* PCI revision/class */ #define RR_EE_PCI_LATENCY 0x0140 /* PCI latency timer */ #define RR_EE_PCI_BAR0 0x0160 /* PCI bar0 address */ #define RR_EE_PCI_COMM_STAT 0x0180 /* PCI command/status */ #define RR_EE_PCI_LAT_GNT 0x01a0 /* PCI max latency/ minimum grant */ #define RR_EE_PCI_CHECKSUM 0x01f0 /* PCI area checksum */ #define RR_EE_HEADER_FORMAT 0x0200 /* revision of header format (should be 1) */ #define RR_EE_ULA_HI 0x0500 /* Universal LAN Address (ULA) */ #define RR_EE_ULA_LO 0x0520 #define RR_EE_RUNCODE_START 0x0a00 /* runcode start PC */ #define RR_EE_RUNCODE_VERSION 0x0a20 /* runcode revision number */ #define RR_EE_RUNCODE_DATE 0x0a40 /* runcode revision date */ #define RR_EE_RUNCODE_SEGMENTS 0x0a80 /* address of count of segments */ #define RR_EE_MODE_AND_STATUS 0x0e00 /* mode and status saved value */ #define RR_EE_CONN_RETRY_COUNT 0x0e20 /* connection retry count */ #define RR_EE_CONN_RETRY_TIMER 0x0e40 /* clock ticks to delay retry */ #define RR_EE_CONN_TIMEOUT 0x0e60 /* campon delay timeout */ #define RR_EE_STATS_TIMER 0x0e80 /* clock ticks between stats copy */ #define RR_EE_INTERRUPT_TIMER 0x0ea0 /* clock ticks between interrupts */ #define RR_EE_TX_TIMEOUT 0x0ec0 /* transmit data not moving timer */ #define RR_EE_RX_TIMEOUT 0x0ee0 /* receive data not moving timer */ #define RR_EE_PCI_STATE 0x0f00 /* misc PCI DMA config */ #define RR_EE_DMA_WRITE_STATE 0x0f20 /* dma write config */ #define RR_EE_DMA_READ_STATE 0x0f40 /* dma read config */ #define RR_EE_DRIVER_PARAM 0x0f60 /* driver-specific params (unused) */ #define RR_EE_HEADER_CHECKSUM 0x0fe0 /* checksum for manufacturing header (0x200 - 0xfc0) */ #define RR_EE_PHASE2_START 0x1040 /* phase 2 start in SRAM */ #define RR_EE_PHASE2_LENGTH 0x1060 /* phase 2 length in words */ #define RR_EE_PHASE2_EE_START 0x1080 /* phase 2 EEPROM start */ /* * Event descriptor */ struct rr_event { u_int16_t re_index; /* merge? Different event types? */ u_int8_t re_ring; u_int8_t re_code; u_int32_t re_timestamp; }; /* * Command descriptor */ union rr_cmd { struct { u_int16_t rc_index; u_int8_t rc_ring; u_int8_t rc_code; } b; u_int32_t l; }; /* * Scatter/gather descriptor -- points to buffers to be DMA'ed in and * out of host space. */ struct rr_descr { u_int32_t rd_reserved1; u_int32_t rd_buffer_addr; u_int32_t rd_reserved2; u_int16_t rd_length; u_int8_t rd_ring; u_int8_t rd_control; #define RR_CT_TX_IPCKSUM 0x04 #define RR_CT_PACKET_END 0x08 #define RR_CT_PACKET_START 0x10 #define RR_CT_INTERRUPT 0x20 #define RR_CT_SHORT_BURST 0x40 #define RR_CT_SAME_IFIELD 0x80 }; /* * Long scatter/gather descriptor -- similar to above descriptor, * but closer to RR's Assist register layout, so that it can just * be DMA'ed into the NIC, and let loose. Required by Runcode v. 2 * and greater. */ struct rr2_descr { u_int32_t rd_reserved1; u_int32_t rd_buffer_addr; u_int32_t rd_reserved2; u_int16_t rd_length; u_int8_t rd_reserved3; u_int8_t rd_control; u_int32_t rd_dma_state; #define RR_DM_TX 0x00606 /* swap code for dma_state on tx */ #define RR_DM_RX 0x20606 /* swap code for dma_state on rx */ u_int32_t rd_reserved4; u_int32_t rd_pkt_length; u_int32_t rd_reserved5; #define RR2_CT_INTERRUPT 0x02 #define RR2_CT_TX_IPCKSUM 0x04 #define RR2_CT_PACKET_END 0x08 #define RR2_CT_PACKET_START 0x10 #define RR2_CT_RING_OUT 0x20 #define RR2_CT_SHORT_BURST 0x40 #define RR2_CT_SAME_IFIELD 0x80 }; /* * Ring control structure -- points to array of buffer descriptors */ struct rr_ring_ctl { u_int32_t rr_reserved1; u_int32_t rr_ring_addr; /* pointer to array of s/g descrs */ u_int16_t rr_entries; u_int8_t rr_free_bufs; #define RR_RR_DONT_COMPLAIN 0xff /* disable free_bufs warning */ u_int8_t rr_entry_size; u_int16_t rr_prod_index; u_int16_t rr_mode; /* XXX: Picture in docs is right, description is wrong */ #define RR_RR_CHARACTER 0x01 /* character mode interface */ #define RR_RR_SEPARATE 0x02 /* separate headers from data */ #define RR_RR_CHECKSUM 0x04 /* doing IP checksums (requires IP on) */ #define RR_RR_IP 0x08 /* receiving IP packets to this ring */ }; /* Statistics block, for now, undifferentiated. */ struct rr_stats { u_int32_t rs_stats[128]; }; /* * General information block */ struct rr_gen_info { struct rr_stats ri_stats; struct rr_ring_ctl ri_event_ring_ctl; struct rr_ring_ctl ri_cmd_ring_ctl; struct rr_ring_ctl ri_send_ring_ctl; u_int8_t ri_reserved1[464]; u_int8_t ri_nic_trace[3072]; }; /* * A few constants: */ #define RR_DMA_BOUNDARY (64 * 1024) /* can't cross 64K boundaries on DMA */ #define RR_DMA_MAX 65535 /* maximum that can be transferred in one DMA operation */ #define RR_ULP_COUNT 256 /* number of possible ULPs */ #define RR_INIT_CMD 15 /* initial command index */ /* NB: All of the ring sizes have to be powers of two */ #define RR_MAX_RECV_RING 32 /* maximum number of receive rings */ #define RR_MAX_DESCR 256 /* maximum number of possible descriptors. XXX: increase with caution, as this allocates static space! */ #define RR_EVENT_RING_SIZE 128 /* why not go for it? */ #define RR_SEND_RING_SIZE 32 /* firmware restriction! */ #define RR_SNAP_RECV_RING_SIZE 32 /* seems to work */ #define RR_FP_RECV_RING_SIZE 32 /* seems to work */ #define RR2_SEND_RING_SIZE 16 /* firmware restriction! */ #define RR2_SNAP_RECV_RING_SIZE 16 /* firmware restriction! */ #define RR_MAX_SEND_RING_SIZE max(RR_SEND_RING_SIZE, RR2_SEND_RING_SIZE) #define RR_MAX_SNAP_RECV_RING_SIZE \ max(RR_SNAP_RECV_RING_SIZE, RR_SNAP_RECV_RING_SIZE)