/* * Copyright (c) 1996 Andrew Gordon. All rights reserved. * * Copyright (c) 1997, 1999 Hellmuth Michaelis. All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. Neither the name of the author nor the names of any co-contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * 4. Altered versions must be plainly marked as such, and must not be * misrepresented as being the original software and/or documentation. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. * *--------------------------------------------------------------------------- * * i4b_avm_a1.c - AVM A1/Fritz passive card driver for isdn4bsd * ------------------------------------------------------------ * * $Id: isic_isa_avm_a1.c,v 1.10 2007/10/19 12:00:19 ad Exp $ * * last edit-date: [Fri Jan 5 11:37:22 2001] * *---------------------------------------------------------------------------*/ #include __KERNEL_RCSID(0, "$NetBSD: isic_isa_avm_a1.c,v 1.10 2007/10/19 12:00:19 ad Exp $"); #include "opt_isicisa.h" #ifdef ISICISA_AVM_A1 #include #if defined(__FreeBSD__) && __FreeBSD__ >= 3 #include #else #include #endif #include #include #include #if defined(__NetBSD__) && __NetBSD_Version__ >= 104230000 #include #endif #ifdef __FreeBSD__ #include #include #else #include #include #endif #include #include #ifdef __FreeBSD__ #include #include #else #include #include #endif #include #include #include #include #include #include #ifndef __FreeBSD__ static u_int8_t avma1_read_reg(struct isic_softc *sc, int what, bus_size_t offs); static void avma1_write_reg(struct isic_softc *sc, int what, bus_size_t offs, u_int8_t data); static void avma1_read_fifo(struct isic_softc *sc, int what, void *buf, size_t size); static void avma1_write_fifo(struct isic_softc *sc, int what, const void *data, size_t size); #endif /*---------------------------------------------------------------------------* * AVM A1 and AVM Fritz! Card special registers *---------------------------------------------------------------------------*/ #define AVM_CONF_REG 0x1800 /* base offset for config register */ #define AVM_CONF_IRQ 0x1801 /* base offset for IRQ register */ /* config register write */ #define AVM_CONF_WR_RESET 0x01 /* 1 = RESET ISAC and HSCX */ #define AVM_CONF_WR_CCL 0x02 /* 1 = clear counter low nibble */ #define AVM_CONF_WR_CCH 0x04 /* 1 = clear counter high nibble */ #define AVM_CONF_WR_IRQEN 0x08 /* 1 = enable IRQ */ #define AVM_CONF_WR_TEST 0x10 /* test bit */ /* config register read */ #define AVM_CONF_RD_IIRQ 0x01 /* 0 = ISAC IRQ active */ #define AVM_CONF_RD_HIRQ 0x02 /* 0 = HSCX IRQ active */ #define AVM_CONF_RD_CIRQ 0x04 /* 0 = counter IRQ active */ #define AVM_CONF_RD_ZER1 0x08 /* unused, always read 0 */ #define AVM_CONF_RD_TEST 0x10 /* test bit read back */ #define AVM_CONF_RD_ZER2 0x20 /* unused, always read 0 */ /*---------------------------------------------------------------------------* * AVM read fifo routines *---------------------------------------------------------------------------*/ #ifdef __FreeBSD__ static void avma1_read_fifo(void *buf, const void *base, size_t len) { insb((int)base - 0x3e0, (u_char *)buf, (u_int)len); } #else static void avma1_read_fifo(struct isic_softc *sc, int what, void *buf, size_t size) { bus_space_tag_t t = sc->sc_maps[what+4].t; bus_space_handle_t h = sc->sc_maps[what+4].h; bus_space_read_multi_1(t, h, 0, buf, size); } #endif /*---------------------------------------------------------------------------* * AVM write fifo routines *---------------------------------------------------------------------------*/ #ifdef __FreeBSD__ static void avma1_write_fifo(void *base, const void *buf, size_t len) { outsb((int)base - 0x3e0, (u_char *)buf, (u_int)len); } #else static void avma1_write_fifo(struct isic_softc *sc, int what, const void *buf, size_t size) { bus_space_tag_t t = sc->sc_maps[what+4].t; bus_space_handle_t h = sc->sc_maps[what+4].h; bus_space_write_multi_1(t, h, 0, buf, size); } #endif /*---------------------------------------------------------------------------* * AVM write register routines *---------------------------------------------------------------------------*/ #ifdef __FreeBSD__ static void avma1_write_reg(u_char *base, u_int offset, u_int v) { outb((int)base + offset, (u_char)v); } #else static void avma1_write_reg(struct isic_softc *sc, int what, bus_size_t offs, u_int8_t data) { bus_space_tag_t t = sc->sc_maps[what+1].t; bus_space_handle_t h = sc->sc_maps[what+1].h; bus_space_write_1(t, h, offs, data); } #endif /*---------------------------------------------------------------------------* * AVM read register routines *---------------------------------------------------------------------------*/ #ifdef __FreeBSD__ static u_char avma1_read_reg(u_char *base, u_int offset) { return (inb((int)base + offset)); } #else static u_int8_t avma1_read_reg(struct isic_softc *sc, int what, bus_size_t offs) { bus_space_tag_t t = sc->sc_maps[what+1].t; bus_space_handle_t h = sc->sc_maps[what+1].h; return bus_space_read_1(t, h, offs); } #endif /*---------------------------------------------------------------------------* * isic_probe_avma1 - probe for AVM A1 and compatibles *---------------------------------------------------------------------------*/ #ifdef __FreeBSD__ int isic_probe_avma1(struct isa_device *dev) { struct isic_softc *sc = &l1_sc[dev->id_unit]; u_char savebyte; u_char byte; /* check max unit range */ if(dev->id_unit >= ISIC_MAXUNIT) { printf("isic%d: Error, unit %d >= ISIC_MAXUNIT for AVM A1/Fritz!\n", dev->id_unit, dev->id_unit); return(0); } sc->sc_unit = dev->id_unit; /* check IRQ validity */ switch(ffs(dev->id_irq)-1) { case 3: case 4: case 5: case 6: case 7: case 8: case 10: case 11: case 12: case 13: case 14: case 15: break; default: printf("isic%d: Error, invalid IRQ [%d] specified for AVM A1/Fritz!\n", dev->id_unit, ffs(dev->id_irq)-1); return(0); break; } sc->sc_irq = dev->id_irq; /* check if memory addr specified */ if(dev->id_maddr) { printf("isic%d: Error, mem addr 0x%lx specified for AVM A1/Fritz!\n", dev->id_unit, (u_long)dev->id_maddr); return(0); } dev->id_msize = 0; /* check if we got an iobase */ switch(dev->id_iobase) { case 0x200: case 0x240: case 0x300: case 0x340: break; default: printf("isic%d: Error, invalid iobase 0x%x specified for AVM A1/Fritz!\n", dev->id_unit, dev->id_iobase); return(0); break; } sc->sc_port = dev->id_iobase; sc->clearirq = NULL; sc->readreg = avma1_read_reg; sc->writereg = avma1_write_reg; sc->readfifo = avma1_read_fifo; sc->writefifo = avma1_write_fifo; /* setup card type */ sc->sc_cardtyp = CARD_TYPEP_AVMA1; /* setup IOM bus type */ sc->sc_bustyp = BUS_TYPE_IOM2; sc->sc_ipac = 0; sc->sc_bfifolen = HSCX_FIFO_LEN; /* setup ISAC and HSCX base addr */ ISAC_BASE = (void *)dev->id_iobase + 0x1400 - 0x20; HSCX_A_BASE = (void *)dev->id_iobase + 0x400 - 0x20; HSCX_B_BASE = (void *)dev->id_iobase + 0xc00 - 0x20; /* * Read HSCX A/B VSTR. * Expected value for AVM A1 is 0x04 or 0x05 and for the * AVM Fritz!Card is 0x05 in the least significant bits. */ if( (((HSCX_READ(0, H_VSTR) & 0xf) != 0x5) && ((HSCX_READ(0, H_VSTR) & 0xf) != 0x4)) || (((HSCX_READ(1, H_VSTR) & 0xf) != 0x5) && ((HSCX_READ(1, H_VSTR) & 0xf) != 0x4)) ) { printf("isic%d: HSCX VSTR test failed for AVM A1/Fritz\n", dev->id_unit); printf("isic%d: HSC0: VSTR: %#x\n", dev->id_unit, HSCX_READ(0, H_VSTR)); printf("isic%d: HSC1: VSTR: %#x\n", dev->id_unit, HSCX_READ(1, H_VSTR)); return (0); } /* AVM A1 or Fritz! control register bits: */ /* read write */ /* 0x01 hscx irq* RESET */ /* 0x02 isac irq* clear counter1 */ /* 0x04 counter irq* clear counter2 */ /* 0x08 always 0 irq enable */ /* 0x10 read test bit set test bit */ /* 0x20 always 0 unused */ /* * XXX the following test may be destructive, to prevent the * worst case, we save the byte first, and in case the test * fails, we write back the saved byte ..... */ savebyte = inb(dev->id_iobase + AVM_CONF_REG); /* write low to test bit */ outb(dev->id_iobase + AVM_CONF_REG, 0x00); /* test bit and next higher and lower bit must be 0 */ if((byte = inb(dev->id_iobase + AVM_CONF_REG) & 0x38) != 0x00) { printf("isic%d: Error, probe-1 failed, 0x%02x should be 0x00 for AVM A1/Fritz!\n", dev->id_unit, byte); outb(dev->id_iobase + AVM_CONF_REG, savebyte); return (0); } /* write high to test bit */ outb(dev->id_iobase + AVM_CONF_REG, 0x10); /* test bit must be high, next higher and lower bit must be 0 */ if((byte = inb(dev->id_iobase + AVM_CONF_REG) & 0x38) != 0x10) { printf("isic%d: Error, probe-2 failed, 0x%02x should be 0x10 for AVM A1/Fritz!\n", dev->id_unit, byte); outb(dev->id_iobase + AVM_CONF_REG, savebyte); return (0); } return (1); } #else int isic_probe_avma1(struct isic_attach_args *ia) { u_int8_t savebyte, v1, v2; /* * Read HSCX A/B VSTR. * Expected value for AVM A1 is 0x04 or 0x05 and for the * AVM Fritz!Card is 0x05 in the least significant bits. */ v1 = bus_space_read_1(ia->ia_maps[ISIC_WHAT_HSCXA+1].t, ia->ia_maps[ISIC_WHAT_HSCXA+1].h, H_VSTR) & 0x0f; v2 = bus_space_read_1(ia->ia_maps[ISIC_WHAT_HSCXB+1].t, ia->ia_maps[ISIC_WHAT_HSCXB+1].h, H_VSTR) & 0x0f; if (v1 != v2 || (v1 != 0x05 && v1 != 0x04)) return 0; /* AVM A1 or Fritz! control register bits: */ /* read write */ /* 0x01 hscx irq* RESET */ /* 0x02 isac irq* clear counter1 */ /* 0x04 counter irq* clear counter2 */ /* 0x08 always 0 irq enable */ /* 0x10 read test bit set test bit */ /* 0x20 always 0 unused */ /* * XXX the following test may be destructive, to prevent the * worst case, we save the byte first, and in case the test * fails, we write back the saved byte ..... */ savebyte = bus_space_read_1(ia->ia_maps[0].t, ia->ia_maps[0].h, 0); /* write low to test bit */ bus_space_write_1(ia->ia_maps[0].t, ia->ia_maps[0].h, 0, 0); /* test bit and next higher and lower bit must be 0 */ if((bus_space_read_1(ia->ia_maps[0].t, ia->ia_maps[0].h, 0) & 0x38) != 0x00) { bus_space_write_1(ia->ia_maps[0].t, ia->ia_maps[0].h, 0, savebyte); return 0; } /* write high to test bit */ bus_space_write_1(ia->ia_maps[0].t, ia->ia_maps[0].h, 0, 0x10); /* test bit must be high, next higher and lower bit must be 0 */ if((bus_space_read_1(ia->ia_maps[0].t, ia->ia_maps[0].h, 0) & 0x38) != 0x10) { bus_space_write_1(ia->ia_maps[0].t, ia->ia_maps[0].h, 0, savebyte); return 0; } return (1); } #endif /*---------------------------------------------------------------------------* * isic_attach_avma1 - attach AVM A1 and compatibles *---------------------------------------------------------------------------*/ #ifdef __FreeBSD__ int isic_attach_avma1(struct isa_device *dev) { struct isic_softc *sc = &l1_sc[dev->id_unit]; /* reset the HSCX and ISAC chips */ outb(dev->id_iobase + AVM_CONF_REG, 0x00); DELAY(SEC_DELAY / 10); outb(dev->id_iobase + AVM_CONF_REG, AVM_CONF_WR_RESET); DELAY(SEC_DELAY / 10); outb(dev->id_iobase + AVM_CONF_REG, 0x00); DELAY(SEC_DELAY / 10); /* setup IRQ */ outb(dev->id_iobase + AVM_CONF_IRQ, (ffs(sc->sc_irq)) - 1); DELAY(SEC_DELAY / 10); /* enable IRQ, disable counter IRQ */ outb(dev->id_iobase + AVM_CONF_REG, AVM_CONF_WR_IRQEN | AVM_CONF_WR_CCH | AVM_CONF_WR_CCL); DELAY(SEC_DELAY / 10); return (1); } #else int isic_attach_avma1(struct isic_softc *sc) { bus_space_tag_t t = sc->sc_maps[0].t; bus_space_handle_t h = sc->sc_maps[0].h; sc->clearirq = NULL; sc->readreg = avma1_read_reg; sc->writereg = avma1_write_reg; sc->readfifo = avma1_read_fifo; sc->writefifo = avma1_write_fifo; /* setup IOM bus type */ sc->sc_bustyp = BUS_TYPE_IOM2; sc->sc_ipac = 0; sc->sc_bfifolen = HSCX_FIFO_LEN; /* reset the HSCX and ISAC chips */ bus_space_write_1(t, h, 0, 0x00); DELAY(SEC_DELAY / 10); bus_space_write_1(t, h, 0, AVM_CONF_WR_RESET); DELAY(SEC_DELAY / 10); bus_space_write_1(t, h, 0, 0x00); DELAY(SEC_DELAY / 10); /* setup IRQ */ bus_space_write_1(t, h, 1, sc->sc_irq); DELAY(SEC_DELAY / 10); /* enable IRQ, disable counter IRQ */ bus_space_write_1(t, h, 0, AVM_CONF_WR_IRQEN | AVM_CONF_WR_CCH | AVM_CONF_WR_CCL); DELAY(SEC_DELAY / 10); return (1); } #endif #endif /* ISICISA_AVM_A1 */