/* $NetBSD: wds.c,v 1.77 2016/07/11 11:31:50 msaitoh Exp $ */ /* * XXX * aborts * resets */ /*- * Copyright (c) 1997, 1998 The NetBSD Foundation, Inc. * All rights reserved. * * This code is derived from software contributed to The NetBSD Foundation * by Jason R. Thorpe of the Numerical Aerospace Simulation Facility, * NASA Ames Research Center. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE * POSSIBILITY OF SUCH DAMAGE. */ /* * Copyright (c) 1994, 1995 Julian Highfield. All rights reserved. * Portions copyright (c) 1994, 1996, 1997 * Charles M. Hannum. All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. All advertising materials mentioning features or use of this software * must display the following acknowledgement: * This product includes software developed by Julian Highfield. * 4. The name of the author may not be used to endorse or promote products * derived from this software without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ /* * This driver is for the WD7000 family of SCSI controllers: * the WD7000-ASC, a bus-mastering DMA controller, * the WD7000-FASST2, an -ASC with new firmware and scatter-gather, * and the WD7000-ASE, which was custom manufactured for Apollo * workstations and seems to include an -ASC as well as floppy * and ESDI interfaces. * * Loosely based on Theo Deraadt's unfinished attempt. */ #include __KERNEL_RCSID(0, "$NetBSD: wds.c,v 1.77 2016/07/11 11:31:50 msaitoh Exp $"); #include "opt_ddb.h" #undef WDSDIAG #ifdef DDB #define integrate #else #define integrate static inline #endif #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #define WDS_ISA_IOSIZE 8 #ifndef DDB #define Debugger() panic("should call debugger here (wds.c)") #endif /* ! DDB */ #define WDS_MAXXFER ((WDS_NSEG - 1) << PGSHIFT) #define WDS_MBX_SIZE 16 #define WDS_SCB_MAX 32 #define SCB_HASH_SIZE 32 /* hash table size for phystokv */ #define SCB_HASH_SHIFT 9 #define SCB_HASH(x) ((((long)(x))>>SCB_HASH_SHIFT) & (SCB_HASH_SIZE - 1)) #define wds_nextmbx(wmb, mbx, mbio) \ if ((wmb) == &(mbx)->mbio[WDS_MBX_SIZE - 1]) \ (wmb) = &(mbx)->mbio[0]; \ else \ (wmb)++; struct wds_mbx { struct wds_mbx_out mbo[WDS_MBX_SIZE]; struct wds_mbx_in mbi[WDS_MBX_SIZE]; struct wds_mbx_out *cmbo; /* Collection Mail Box out */ struct wds_mbx_out *tmbo; /* Target Mail Box out */ struct wds_mbx_in *tmbi; /* Target Mail Box in */ }; struct wds_softc { device_t sc_dev; bus_space_tag_t sc_iot; bus_space_handle_t sc_ioh; bus_dma_tag_t sc_dmat; bus_dmamap_t sc_dmamap_mbox; /* maps the mailbox */ void *sc_ih; struct wds_mbx *sc_mbx; #define wmbx (sc->sc_mbx) struct wds_scb *sc_scbhash[SCB_HASH_SIZE]; TAILQ_HEAD(, wds_scb) sc_free_scb, sc_waiting_scb; int sc_numscbs, sc_mbofull; struct scsipi_adapter sc_adapter; struct scsipi_channel sc_channel; int sc_revision; int sc_maxsegs; }; struct wds_probe_data { #ifdef notyet int sc_irq, sc_drq; #endif int sc_scsi_dev; }; integrate void wds_wait(bus_space_tag_t, bus_space_handle_t, int, int, int); int wds_cmd(bus_space_tag_t, bus_space_handle_t, u_char *, int); integrate void wds_finish_scbs(struct wds_softc *); int wdsintr(void *); integrate void wds_reset_scb(struct wds_softc *, struct wds_scb *); void wds_free_scb(struct wds_softc *, struct wds_scb *); integrate int wds_init_scb(struct wds_softc *, struct wds_scb *); struct wds_scb *wds_get_scb(struct wds_softc *); struct wds_scb *wds_scb_phys_kv(struct wds_softc *, u_long); void wds_queue_scb(struct wds_softc *, struct wds_scb *); void wds_collect_mbo(struct wds_softc *); void wds_start_scbs(struct wds_softc *); void wds_done(struct wds_softc *, struct wds_scb *, u_char); int wds_find(bus_space_tag_t, bus_space_handle_t, struct wds_probe_data *); void wds_attach(struct wds_softc *, struct wds_probe_data *); void wds_init(struct wds_softc *, int); void wds_inquire_setup_information(struct wds_softc *); void wdsminphys(struct buf *); void wds_scsipi_request(struct scsipi_channel *, scsipi_adapter_req_t, void *); int wds_poll(struct wds_softc *, struct scsipi_xfer *, int); int wds_ipoll(struct wds_softc *, struct wds_scb *, int); void wds_timeout(void *); int wds_create_scbs(struct wds_softc *, void *, size_t); int wdsprobe(device_t, cfdata_t, void *); void wdsattach(device_t, device_t, void *); CFATTACH_DECL_NEW(wds, sizeof(struct wds_softc), wdsprobe, wdsattach, NULL, NULL); #ifdef WDSDEBUG int wds_debug = 0; #endif #define WDS_ABORT_TIMEOUT 2000 /* time to wait for abort (mSec) */ integrate void wds_wait(bus_space_tag_t iot, bus_space_handle_t ioh, int port, int mask, int val) { while ((bus_space_read_1(iot, ioh, port) & mask) != val) ; } /* * Write a command to the board's I/O ports. */ int wds_cmd(bus_space_tag_t iot, bus_space_handle_t ioh, u_char *ibuf, int icnt) { u_char c; wds_wait(iot, ioh, WDS_STAT, WDSS_RDY, WDSS_RDY); while (icnt--) { bus_space_write_1(iot, ioh, WDS_CMD, *ibuf++); wds_wait(iot, ioh, WDS_STAT, WDSS_RDY, WDSS_RDY); c = bus_space_read_1(iot, ioh, WDS_STAT); if (c & WDSS_REJ) return 1; } return 0; } /* * Check for the presence of a WD7000 SCSI controller. */ int wdsprobe(device_t parent, cfdata_t match, void *aux) { struct isa_attach_args *ia = aux; bus_space_tag_t iot = ia->ia_iot; bus_space_handle_t ioh; struct wds_probe_data wpd; int rv; if (ia->ia_nio < 1) return (0); if (ia->ia_nirq < 1) return (0); if (ia->ia_ndrq < 1) return (0); if (ISA_DIRECT_CONFIG(ia)) return (0); /* Disallow wildcarded i/o address. */ if (ia->ia_io[0].ir_addr == ISA_UNKNOWN_PORT) return (0); if (bus_space_map(iot, ia->ia_io[0].ir_addr, WDS_ISA_IOSIZE, 0, &ioh)) return (0); rv = wds_find(iot, ioh, &wpd); bus_space_unmap(iot, ioh, WDS_ISA_IOSIZE); if (rv) { #ifdef notyet if (ia->ia_irq[0].ir_irq != ISA_UNKNOWN_IRQ && ia->ia_irq[0].ir_irq != wpd.sc_irq) return (0); if (ia->ia_drq[0].ir_drq != ISA_UNKNOWN_DRQ && ia->ia_drq[0].ir_drq != wpd.sc_drq) return (0); ia->ia_nirq = 1; ia->ia_irq[0].ir_irq = wpd.sc_irq; ia->ia_ndrq = 1; ia->ia_drq[0].ir_drq = wpd.sc_drq; #else if (ia->ia_irq[0].ir_irq == ISA_UNKNOWN_IRQ) return (0); if (ia->ia_drq[0].ir_drq == ISA_UNKNOWN_DRQ) return (0); ia->ia_nirq = 1; ia->ia_ndrq = 1; #endif ia->ia_nio = 1; ia->ia_io[0].ir_size = WDS_ISA_IOSIZE; ia->ia_niomem = 0; } return (rv); } /* * Attach all available units. */ void wdsattach(device_t parent, device_t self, void *aux) { struct isa_attach_args *ia = aux; struct wds_softc *sc = device_private(self); bus_space_tag_t iot = ia->ia_iot; bus_space_handle_t ioh; struct wds_probe_data wpd; isa_chipset_tag_t ic = ia->ia_ic; int error; sc->sc_dev = self; printf("\n"); if (bus_space_map(iot, ia->ia_io[0].ir_addr, WDS_ISA_IOSIZE, 0, &ioh)) { aprint_error_dev(sc->sc_dev, "can't map i/o space\n"); return; } sc->sc_iot = iot; sc->sc_ioh = ioh; sc->sc_dmat = ia->ia_dmat; if (!wds_find(iot, ioh, &wpd)) { aprint_error_dev(sc->sc_dev, "wds_find failed\n"); return; } bus_space_write_1(iot, ioh, WDS_HCR, WDSH_DRQEN); #ifdef notyet if (wpd.sc_drq != -1) { if ((error = isa_dmacascade(ic, wpd.sc_drq)) != 0) { aprint_error_dev(sc->sc_dev, "unable to cascade DRQ, error = %d\n", error); return; } } sc->sc_ih = isa_intr_establish(ic, wpd.sc_irq, IST_EDGE, IPL_BIO, wdsintr, sc); #else if ((error = isa_dmacascade(ic, ia->ia_drq[0].ir_drq)) != 0) { aprint_error_dev(sc->sc_dev, "unable to cascade DRQ, error = %d\n", error); return; } sc->sc_ih = isa_intr_establish(ic, ia->ia_irq[0].ir_irq, IST_EDGE, IPL_BIO, wdsintr, sc); #endif if (sc->sc_ih == NULL) { aprint_error_dev(sc->sc_dev, "couldn't establish interrupt\n"); return; } wds_attach(sc, &wpd); } void wds_attach(struct wds_softc *sc, struct wds_probe_data *wpd) { struct scsipi_adapter *adapt = &sc->sc_adapter; struct scsipi_channel *chan = &sc->sc_channel; TAILQ_INIT(&sc->sc_free_scb); TAILQ_INIT(&sc->sc_waiting_scb); /* * Fill in the scsipi_adapter. */ memset(adapt, 0, sizeof(*adapt)); adapt->adapt_dev = sc->sc_dev; adapt->adapt_nchannels = 1; /* adapt_openings initialized below */ adapt->adapt_max_periph = 1; adapt->adapt_request = wds_scsipi_request; adapt->adapt_minphys = minphys; /* * Fill in the scsipi_channel. */ memset(chan, 0, sizeof(*chan)); chan->chan_adapter = adapt; chan->chan_bustype = &scsi_bustype; chan->chan_channel = 0; chan->chan_ntargets = 8; chan->chan_nluns = 8; chan->chan_id = wpd->sc_scsi_dev; wds_init(sc, 0); wds_inquire_setup_information(sc); /* XXX add support for GROW */ adapt->adapt_openings = sc->sc_numscbs; /* * ask the adapter what subunits are present */ config_found(sc->sc_dev, &sc->sc_channel, scsiprint); } integrate void wds_finish_scbs(struct wds_softc *sc) { struct wds_mbx_in *wmbi; struct wds_scb *scb; int i; wmbi = wmbx->tmbi; if (wmbi->stat == WDS_MBI_FREE) { for (i = 0; i < WDS_MBX_SIZE; i++) { if (wmbi->stat != WDS_MBI_FREE) { printf("%s: mbi not in round-robin order\n", device_xname(sc->sc_dev)); goto AGAIN; } wds_nextmbx(wmbi, wmbx, mbi); } #ifdef WDSDIAGnot printf("%s: mbi interrupt with no full mailboxes\n", device_xname(sc->sc_dev)); #endif return; } AGAIN: do { scb = wds_scb_phys_kv(sc, phystol(wmbi->scb_addr)); if (!scb) { printf("%s: bad mbi scb pointer; skipping\n", device_xname(sc->sc_dev)); goto next; } #ifdef WDSDEBUG if (wds_debug) { u_char *cp = scb->cmd.xx; printf("op=%x %x %x %x %x %x\n", cp[0], cp[1], cp[2], cp[3], cp[4], cp[5]); printf("stat %x for mbi addr = %p, ", wmbi->stat, wmbi); printf("scb addr = %p\n", scb); } #endif /* WDSDEBUG */ callout_stop(&scb->xs->xs_callout); wds_done(sc, scb, wmbi->stat); next: wmbi->stat = WDS_MBI_FREE; wds_nextmbx(wmbi, wmbx, mbi); } while (wmbi->stat != WDS_MBI_FREE); wmbx->tmbi = wmbi; } /* * Process an interrupt. */ int wdsintr(void *arg) { struct wds_softc *sc = arg; bus_space_tag_t iot = sc->sc_iot; bus_space_handle_t ioh = sc->sc_ioh; u_char c; /* Was it really an interrupt from the board? */ if ((bus_space_read_1(iot, ioh, WDS_STAT) & WDSS_IRQ) == 0) return 0; /* Get the interrupt status byte. */ c = bus_space_read_1(iot, ioh, WDS_IRQSTAT) & WDSI_MASK; /* Acknowledge (which resets) the interrupt. */ bus_space_write_1(iot, ioh, WDS_IRQACK, 0x00); switch (c) { case WDSI_MSVC: wds_finish_scbs(sc); break; case WDSI_MFREE: wds_start_scbs(sc); break; default: aprint_error_dev(sc->sc_dev, "unrecognized interrupt type %02x", c); break; } return 1; } integrate void wds_reset_scb(struct wds_softc *sc, struct wds_scb *scb) { scb->flags = 0; } /* * Free the command structure, the outgoing mailbox and the data buffer. */ void wds_free_scb(struct wds_softc *sc, struct wds_scb *scb) { int s; s = splbio(); wds_reset_scb(sc, scb); TAILQ_INSERT_HEAD(&sc->sc_free_scb, scb, chain); splx(s); } integrate int wds_init_scb(struct wds_softc *sc, struct wds_scb *scb) { bus_dma_tag_t dmat = sc->sc_dmat; int hashnum, error; /* * XXX Should we put a DIAGNOSTIC check for multiple * XXX SCB inits here? */ memset(scb, 0, sizeof(struct wds_scb)); /* * Create DMA maps for this SCB. */ error = bus_dmamap_create(dmat, sizeof(struct wds_scb), 1, sizeof(struct wds_scb), 0, BUS_DMA_NOWAIT, &scb->dmamap_self); if (error) { aprint_error_dev(sc->sc_dev, "can't create scb dmamap_self\n"); return (error); } error = bus_dmamap_create(dmat, WDS_MAXXFER, WDS_NSEG, WDS_MAXXFER, 0, BUS_DMA_NOWAIT|BUS_DMA_ALLOCNOW, &scb->dmamap_xfer); if (error) { aprint_error_dev(sc->sc_dev, "can't create scb dmamap_xfer\n"); bus_dmamap_destroy(dmat, scb->dmamap_self); return (error); } /* * Load the permanent DMA maps. */ error = bus_dmamap_load(dmat, scb->dmamap_self, scb, sizeof(struct wds_scb), NULL, BUS_DMA_NOWAIT); if (error) { aprint_error_dev(sc->sc_dev, "can't load scb dmamap_self\n"); bus_dmamap_destroy(dmat, scb->dmamap_self); bus_dmamap_destroy(dmat, scb->dmamap_xfer); return (error); } /* * put in the phystokv hash table * Never gets taken out. */ scb->hashkey = scb->dmamap_self->dm_segs[0].ds_addr; hashnum = SCB_HASH(scb->hashkey); scb->nexthash = sc->sc_scbhash[hashnum]; sc->sc_scbhash[hashnum] = scb; wds_reset_scb(sc, scb); return (0); } /* * Create a set of scbs and add them to the free list. */ int wds_create_scbs(struct wds_softc *sc, void *mem, size_t size) { bus_dma_segment_t seg; struct wds_scb *scb; int rseg, error; if (sc->sc_numscbs >= WDS_SCB_MAX) return (0); if ((scb = mem) != NULL) goto have_mem; size = PAGE_SIZE; error = bus_dmamem_alloc(sc->sc_dmat, size, PAGE_SIZE, 0, &seg, 1, &rseg, BUS_DMA_NOWAIT); if (error) { aprint_error_dev(sc->sc_dev, "can't allocate memory for scbs\n"); return (error); } error = bus_dmamem_map(sc->sc_dmat, &seg, rseg, size, (void *)&scb, BUS_DMA_NOWAIT|BUS_DMA_COHERENT); if (error) { aprint_error_dev(sc->sc_dev, "can't map memory for scbs\n"); bus_dmamem_free(sc->sc_dmat, &seg, rseg); return (error); } have_mem: memset(scb, 0, size); while (size > sizeof(struct wds_scb) && sc->sc_numscbs < WDS_SCB_MAX) { error = wds_init_scb(sc, scb); if (error) { aprint_error_dev(sc->sc_dev, "can't initialize scb\n"); return (error); } TAILQ_INSERT_TAIL(&sc->sc_free_scb, scb, chain); scb = (struct wds_scb *)((char *)scb + ALIGN(sizeof(struct wds_scb))); size -= ALIGN(sizeof(struct wds_scb)); sc->sc_numscbs++; } return (0); } /* * Get a free scb * * If there are none, see if we can allocate a new one. If so, put it in * the hash table too otherwise either return an error or sleep. */ struct wds_scb * wds_get_scb(struct wds_softc *sc) { struct wds_scb *scb; int s; s = splbio(); scb = TAILQ_FIRST(&sc->sc_free_scb); if (scb != NULL) { TAILQ_REMOVE(&sc->sc_free_scb, scb, chain); scb->flags |= SCB_ALLOC; } splx(s); return (scb); } struct wds_scb * wds_scb_phys_kv(struct wds_softc *sc, u_long scb_phys) { int hashnum = SCB_HASH(scb_phys); struct wds_scb *scb = sc->sc_scbhash[hashnum]; while (scb) { if (scb->hashkey == scb_phys) break; /* XXX Check to see if it matches the sense command block. */ if (scb->hashkey == (scb_phys - sizeof(struct wds_cmd))) break; scb = scb->nexthash; } return (scb); } /* * Queue a SCB to be sent to the controller, and send it if possible. */ void wds_queue_scb(struct wds_softc *sc, struct wds_scb *scb) { TAILQ_INSERT_TAIL(&sc->sc_waiting_scb, scb, chain); wds_start_scbs(sc); } /* * Garbage collect mailboxes that are no longer in use. */ void wds_collect_mbo(struct wds_softc *sc) { struct wds_mbx_out *wmbo; /* Mail Box Out pointer */ #ifdef WDSDIAG struct wds_scb *scb; #endif wmbo = wmbx->cmbo; while (sc->sc_mbofull > 0) { if (wmbo->cmd != WDS_MBO_FREE) break; #ifdef WDSDIAG scb = wds_scb_phys_kv(sc, phystol(wmbo->scb_addr)); scb->flags &= ~SCB_SENDING; #endif --sc->sc_mbofull; wds_nextmbx(wmbo, wmbx, mbo); } wmbx->cmbo = wmbo; } /* * Send as many SCBs as we have empty mailboxes for. */ void wds_start_scbs(struct wds_softc *sc) { bus_space_tag_t iot = sc->sc_iot; bus_space_handle_t ioh = sc->sc_ioh; struct wds_mbx_out *wmbo; /* Mail Box Out pointer */ struct wds_scb *scb; u_char c; wmbo = wmbx->tmbo; while ((scb = sc->sc_waiting_scb.tqh_first) != NULL) { if (sc->sc_mbofull >= WDS_MBX_SIZE) { wds_collect_mbo(sc); if (sc->sc_mbofull >= WDS_MBX_SIZE) { c = WDSC_IRQMFREE; wds_cmd(iot, ioh, &c, sizeof c); break; } } TAILQ_REMOVE(&sc->sc_waiting_scb, scb, chain); #ifdef WDSDIAG scb->flags |= SCB_SENDING; #endif /* Link scb to mbo. */ ltophys(scb->dmamap_self->dm_segs[0].ds_addr + offsetof(struct wds_scb, cmd), wmbo->scb_addr); /* XXX What about aborts? */ wmbo->cmd = WDS_MBO_START; /* Tell the card to poll immediately. */ c = WDSC_MSTART(wmbo - wmbx->mbo); wds_cmd(sc->sc_iot, sc->sc_ioh, &c, sizeof c); if ((scb->flags & SCB_POLLED) == 0) callout_reset(&scb->xs->xs_callout, mstohz(scb->timeout), wds_timeout, scb); ++sc->sc_mbofull; wds_nextmbx(wmbo, wmbx, mbo); } wmbx->tmbo = wmbo; } /* * Process the result of a SCSI command. */ void wds_done(struct wds_softc *sc, struct wds_scb *scb, u_char stat) { bus_dma_tag_t dmat = sc->sc_dmat; struct scsipi_xfer *xs = scb->xs; /* XXXXX */ /* Don't release the SCB if it was an internal command. */ if (xs == 0) { scb->flags |= SCB_DONE; return; } /* * If we were a data transfer, unload the map that described * the data buffer. */ if (xs->datalen) { bus_dmamap_sync(dmat, scb->dmamap_xfer, 0, scb->dmamap_xfer->dm_mapsize, (xs->xs_control & XS_CTL_DATA_IN) ? BUS_DMASYNC_POSTREAD : BUS_DMASYNC_POSTWRITE); bus_dmamap_unload(dmat, scb->dmamap_xfer); } if (xs->error == XS_NOERROR) { /* If all went well, or an error is acceptable. */ if (stat == WDS_MBI_OK) { /* OK, set the result */ xs->resid = 0; } else { /* Check the mailbox status. */ switch (stat) { case WDS_MBI_OKERR: /* * SCSI error recorded in scb, * counts as WDS_MBI_OK */ switch (scb->cmd.venderr) { case 0x00: aprint_error_dev(sc->sc_dev, "Is this an error?\n"); /* Experiment. */ xs->error = XS_DRIVER_STUFFUP; break; case 0x01: #if 0 aprint_error_dev(sc->sc_dev, "OK, see SCSI error field.\n"); #endif if (scb->cmd.stat == SCSI_CHECK || scb->cmd.stat == SCSI_BUSY) { xs->status = scb->cmd.stat; xs->error = XS_BUSY; } break; case 0x40: #if 0 printf("%s: DMA underrun!\n", device_xname(sc->sc_dev)); #endif /* * Hits this if the target * returns fewer that datalen * bytes (eg my CD-ROM, which * returns a short version * string, or if DMA is * turned off etc. */ xs->resid = 0; break; default: printf("%s: VENDOR ERROR " "%02x, scsi %02x\n", device_xname(sc->sc_dev), scb->cmd.venderr, scb->cmd.stat); /* Experiment. */ xs->error = XS_DRIVER_STUFFUP; break; } break; case WDS_MBI_ETIME: /* * The documentation isn't clear on * what conditions might generate this, * but selection timeouts are the only * one I can think of. */ xs->error = XS_SELTIMEOUT; break; case WDS_MBI_ERESET: case WDS_MBI_ETARCMD: case WDS_MBI_ERESEL: case WDS_MBI_ESEL: case WDS_MBI_EABORT: case WDS_MBI_ESRESET: case WDS_MBI_EHRESET: xs->error = XS_DRIVER_STUFFUP; break; } } } /* XS_NOERROR */ wds_free_scb(sc, scb); scsipi_done(xs); } int wds_find(bus_space_tag_t iot, bus_space_handle_t ioh, struct wds_probe_data *sc) { int i; /* XXXXX */ /* * Sending a command causes the CMDRDY bit to clear. */ for (i = 5; i; i--) { if ((bus_space_read_1(iot, ioh, WDS_STAT) & WDSS_RDY) != 0) break; delay(100); } if (!i) return 0; bus_space_write_1(iot, ioh, WDS_CMD, WDSC_NOOP); if ((bus_space_read_1(iot, ioh, WDS_STAT) & WDSS_RDY) != 0) return 0; bus_space_write_1(iot, ioh, WDS_HCR, WDSH_SCSIRESET|WDSH_ASCRESET); delay(10000); bus_space_write_1(iot, ioh, WDS_HCR, 0x00); delay(500000); wds_wait(iot, ioh, WDS_STAT, WDSS_RDY, WDSS_RDY); if (bus_space_read_1(iot, ioh, WDS_IRQSTAT) != 1) if (bus_space_read_1(iot, ioh, WDS_IRQSTAT) != 7) return 0; for (i = 2000; i; i--) { if ((bus_space_read_1(iot, ioh, WDS_STAT) & WDSS_RDY) != 0) break; delay(100); } if (!i) return 0; if (sc) { #ifdef notyet sc->sc_irq = ...; sc->sc_drq = ...; #endif /* XXX Can we do this better? */ sc->sc_scsi_dev = 7; } return 1; } /* * Initialise the board and driver. */ void wds_init(struct wds_softc *sc, int isreset) { bus_space_tag_t iot = sc->sc_iot; bus_space_handle_t ioh = sc->sc_ioh; bus_dma_segment_t seg; struct wds_setup init; u_char c; int i, rseg; if (isreset) goto doinit; /* * Allocate the mailbox. */ if (bus_dmamem_alloc(sc->sc_dmat, PAGE_SIZE, PAGE_SIZE, 0, &seg, 1, &rseg, BUS_DMA_NOWAIT) || bus_dmamem_map(sc->sc_dmat, &seg, rseg, PAGE_SIZE, (void **)&wmbx, BUS_DMA_NOWAIT|BUS_DMA_COHERENT)) panic("wds_init: can't create or map mailbox"); /* * Since DMA memory allocation is always rounded up to a * page size, create some scbs from the leftovers. */ if (wds_create_scbs(sc, ((char *)wmbx) + ALIGN(sizeof(struct wds_mbx)), PAGE_SIZE - ALIGN(sizeof(struct wds_mbx)))) panic("wds_init: can't create scbs"); /* * Create and load the mailbox DMA map. */ if (bus_dmamap_create(sc->sc_dmat, sizeof(struct wds_mbx), 1, sizeof(struct wds_mbx), 0, BUS_DMA_NOWAIT, &sc->sc_dmamap_mbox) || bus_dmamap_load(sc->sc_dmat, sc->sc_dmamap_mbox, wmbx, sizeof(struct wds_mbx), NULL, BUS_DMA_NOWAIT)) panic("wds_ionit: can't create or load mailbox DMA map"); doinit: /* * Set up initial mail box for round-robin operation. */ for (i = 0; i < WDS_MBX_SIZE; i++) { wmbx->mbo[i].cmd = WDS_MBO_FREE; wmbx->mbi[i].stat = WDS_MBI_FREE; } wmbx->cmbo = wmbx->tmbo = &wmbx->mbo[0]; wmbx->tmbi = &wmbx->mbi[0]; sc->sc_mbofull = 0; init.opcode = WDSC_INIT; init.scsi_id = sc->sc_channel.chan_id; init.buson_t = 48; init.busoff_t = 24; init.xx = 0; ltophys(sc->sc_dmamap_mbox->dm_segs[0].ds_addr, init.mbaddr); init.nomb = init.nimb = WDS_MBX_SIZE; wds_cmd(iot, ioh, (u_char *)&init, sizeof init); wds_wait(iot, ioh, WDS_STAT, WDSS_INIT, WDSS_INIT); c = WDSC_DISUNSOL; wds_cmd(iot, ioh, &c, sizeof c); } /* * Read the board's firmware revision information. */ void wds_inquire_setup_information(struct wds_softc *sc) { bus_space_tag_t iot = sc->sc_iot; bus_space_handle_t ioh = sc->sc_ioh; struct wds_scb *scb; u_char *j; int s; sc->sc_maxsegs = 1; scb = wds_get_scb(sc); if (scb == 0) panic("wds_inquire_setup_information: no scb available"); scb->xs = NULL; scb->timeout = 40; memset(&scb->cmd, 0, sizeof scb->cmd); scb->cmd.write = 0x80; scb->cmd.opcode = WDSX_GETFIRMREV; /* Will poll card, await result. */ bus_space_write_1(iot, ioh, WDS_HCR, WDSH_DRQEN); scb->flags |= SCB_POLLED; s = splbio(); wds_queue_scb(sc, scb); splx(s); if (wds_ipoll(sc, scb, scb->timeout)) goto out; /* Print the version number. */ printf("%s: version %x.%02x ", device_xname(sc->sc_dev), scb->cmd.targ, scb->cmd.scb[0]); sc->sc_revision = (scb->cmd.targ << 8) | scb->cmd.scb[0]; /* Print out the version string. */ j = 2 + &(scb->cmd.targ); while ((*j >= 32) && (*j < 128)) { printf("%c", *j); j++; } /* * Determine if we can use scatter/gather. */ if (sc->sc_revision >= 0x800) sc->sc_maxsegs = WDS_NSEG; out: printf("\n"); /* * Free up the resources used by this scb. */ wds_free_scb(sc, scb); } void wdsminphys(struct buf *bp) { if (bp->b_bcount > WDS_MAXXFER) bp->b_bcount = WDS_MAXXFER; minphys(bp); } /* * Send a SCSI command. */ void wds_scsipi_request(struct scsipi_channel *chan, scsipi_adapter_req_t req, void *arg) { struct scsipi_xfer *xs; struct scsipi_periph *periph; struct wds_softc *sc = device_private(chan->chan_adapter->adapt_dev); bus_dma_tag_t dmat = sc->sc_dmat; struct wds_scb *scb; int error, seg, flags, s; switch (req) { case ADAPTER_REQ_RUN_XFER: xs = arg; periph = xs->xs_periph; if (xs->xs_control & XS_CTL_RESET) { /* XXX Fix me! */ printf("%s: reset!\n", device_xname(sc->sc_dev)); wds_init(sc, 1); scsipi_done(xs); return; } if (xs->xs_control & XS_CTL_DATA_UIO) { /* XXX Fix me! */ /* * Let's not worry about UIO. There isn't any code * for the non-SG boards anyway! */ aprint_error_dev(sc->sc_dev, "UIO is untested and disabled!\n"); xs->error = XS_DRIVER_STUFFUP; scsipi_done(xs); return; } flags = xs->xs_control; /* Get an SCB to use. */ scb = wds_get_scb(sc); #ifdef DIAGNOSTIC /* * This should never happen as we track the resources * in the mid-layer. */ if (scb == NULL) { scsipi_printaddr(periph); printf("unable to allocate scb\n"); panic("wds_scsipi_request"); } #endif scb->xs = xs; scb->timeout = xs->timeout; /* Zero out the command structure. */ if (xs->cmdlen > sizeof(scb->cmd.scb)) { aprint_error_dev(sc->sc_dev, "cmdlen %d too large for SCB\n", xs->cmdlen); xs->error = XS_DRIVER_STUFFUP; goto out_bad; } memset(&scb->cmd, 0, sizeof scb->cmd); memcpy(&scb->cmd.scb, xs->cmd, xs->cmdlen); /* Set up some of the command fields. */ scb->cmd.targ = (periph->periph_target << 5) | periph->periph_lun; /* * NOTE: cmd.write may be OK as 0x40 (disable direction * checking) on boards other than the WD-7000V-ASE. Need * this for the ASE: */ scb->cmd.write = (xs->xs_control & XS_CTL_DATA_IN) ? 0x80 : 0x00; if (xs->datalen) { seg = 0; #ifdef TFS if (flags & XS_CTL_DATA_UIO) { error = bus_dmamap_load_uio(dmat, scb->dmamap_xfer, (struct uio *)xs->data, BUS_DMA_NOWAIT | ((flags & XS_CTL_DATA_IN) ? BUS_DMA_READ : BUS_DMA_WRITE)); } else #endif /* TFS */ { error = bus_dmamap_load(dmat, scb->dmamap_xfer, xs->data, xs->datalen, NULL, BUS_DMA_NOWAIT | ((flags & XS_CTL_DATA_IN) ? BUS_DMA_READ : BUS_DMA_WRITE)); } switch (error) { case 0: break; case ENOMEM: case EAGAIN: xs->error = XS_RESOURCE_SHORTAGE; goto out_bad; default: xs->error = XS_DRIVER_STUFFUP; aprint_error_dev(sc->sc_dev, "error %d loading DMA map\n", error); out_bad: wds_free_scb(sc, scb); scsipi_done(xs); return; } bus_dmamap_sync(dmat, scb->dmamap_xfer, 0, scb->dmamap_xfer->dm_mapsize, (flags & XS_CTL_DATA_IN) ? BUS_DMASYNC_PREREAD : BUS_DMASYNC_PREWRITE); if (sc->sc_maxsegs > 1) { /* * Load the hardware scatter/gather map with the * contents of the DMA map. */ for (seg = 0; seg < scb->dmamap_xfer->dm_nsegs; seg++) { ltophys(scb->dmamap_xfer->dm_segs[seg].ds_addr, scb->scat_gath[seg].seg_addr); ltophys(scb->dmamap_xfer->dm_segs[seg].ds_len, scb->scat_gath[seg].seg_len); } /* * Set up for scatter/gather transfer. */ scb->cmd.opcode = WDSX_SCSISG; ltophys(scb->dmamap_self->dm_segs[0].ds_addr + offsetof(struct wds_scb, scat_gath), scb->cmd.data); ltophys(scb->dmamap_self->dm_nsegs * sizeof(struct wds_scat_gath), scb->cmd.len); } else { /* * This board is an ASC or an ASE, and the * transfer has been mapped contig for us. */ scb->cmd.opcode = WDSX_SCSICMD; ltophys(scb->dmamap_xfer->dm_segs[0].ds_addr, scb->cmd.data); ltophys(scb->dmamap_xfer->dm_segs[0].ds_len, scb->cmd.len); } } else { scb->cmd.opcode = WDSX_SCSICMD; ltophys(0, scb->cmd.data); ltophys(0, scb->cmd.len); } scb->cmd.stat = 0x00; scb->cmd.venderr = 0x00; ltophys(0, scb->cmd.link); /* XXX Do we really want to do this? */ if (flags & XS_CTL_POLL) { /* Will poll card, await result. */ bus_space_write_1(sc->sc_iot, sc->sc_ioh, WDS_HCR, WDSH_DRQEN); scb->flags |= SCB_POLLED; } else { /* * Will send command, let interrupt routine * handle result. */ bus_space_write_1(sc->sc_iot, sc->sc_ioh, WDS_HCR, WDSH_IRQEN | WDSH_DRQEN); } s = splbio(); wds_queue_scb(sc, scb); splx(s); if ((flags & XS_CTL_POLL) == 0) return; if (wds_poll(sc, xs, scb->timeout)) { wds_timeout(scb); if (wds_poll(sc, xs, scb->timeout)) wds_timeout(scb); } return; case ADAPTER_REQ_GROW_RESOURCES: /* XXX Not supported. */ return; case ADAPTER_REQ_SET_XFER_MODE: /* XXX How do we do this? */ return; } } /* * Poll a particular unit, looking for a particular scb */ int wds_poll(struct wds_softc *sc, struct scsipi_xfer *xs, int count) { bus_space_tag_t iot = sc->sc_iot; bus_space_handle_t ioh = sc->sc_ioh; /* timeouts are in msec, so we loop in 1000 usec cycles */ while (count) { /* * If we had interrupts enabled, would we * have got an interrupt? */ if (bus_space_read_1(iot, ioh, WDS_STAT) & WDSS_IRQ) wdsintr(sc); if (xs->xs_status & XS_STS_DONE) return 0; delay(1000); /* only happens in boot so ok */ count--; } return 1; } /* * Poll a particular unit, looking for a particular scb */ int wds_ipoll(struct wds_softc *sc, struct wds_scb *scb, int count) { bus_space_tag_t iot = sc->sc_iot; bus_space_handle_t ioh = sc->sc_ioh; /* timeouts are in msec, so we loop in 1000 usec cycles */ while (count) { /* * If we had interrupts enabled, would we * have got an interrupt? */ if (bus_space_read_1(iot, ioh, WDS_STAT) & WDSS_IRQ) wdsintr(sc); if (scb->flags & SCB_DONE) return 0; delay(1000); /* only happens in boot so ok */ count--; } return 1; } void wds_timeout(void *arg) { struct wds_scb *scb = arg; struct scsipi_xfer *xs = scb->xs; struct scsipi_periph *periph = xs->xs_periph; struct wds_softc *sc = device_private(periph->periph_channel->chan_adapter->adapt_dev); int s; scsipi_printaddr(periph); printf("timed out"); s = splbio(); #ifdef WDSDIAG /* * If The scb's mbx is not free, then the board has gone south? */ wds_collect_mbo(sc); if (scb->flags & SCB_SENDING) { aprint_error_dev(sc->sc_dev, "not taking commands!\n"); Debugger(); } #endif /* * If it has been through before, then * a previous abort has failed, don't * try abort again */ if (scb->flags & SCB_ABORT) { /* abort timed out */ printf(" AGAIN\n"); /* XXX Must reset! */ } else { /* abort the operation that has timed out */ printf("\n"); scb->xs->error = XS_TIMEOUT; scb->timeout = WDS_ABORT_TIMEOUT; scb->flags |= SCB_ABORT; wds_queue_scb(sc, scb); } splx(s); }