/* $NetBSD: ciphy.c,v 1.26.10.3 2019/10/24 15:58:45 martin Exp $ */ /*- * Copyright (c) 2004 * Bill Paul . All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. All advertising materials mentioning features or use of this software * must display the following acknowledgement: * This product includes software developed by Bill Paul. * 4. Neither the name of the author nor the names of any co-contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY Bill Paul AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL Bill Paul OR THE VOICES IN HIS HEAD * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF * THE POSSIBILITY OF SUCH DAMAGE. * * FreeBSD: src/sys/dev/mii/ciphy.c,v 1.2 2005/01/06 01:42:55 imp Exp */ #include __KERNEL_RCSID(0, "$NetBSD: ciphy.c,v 1.26.10.3 2019/10/24 15:58:45 martin Exp $"); /* * Driver for the Cicada CS8201 10/100/1000 copper PHY. */ #include #include #include #include #include #include #include #include #include #include #include #include #include static int ciphymatch(device_t, cfdata_t, void *); static void ciphyattach(device_t, device_t, void *); CFATTACH_DECL_NEW(ciphy, sizeof(struct mii_softc), ciphymatch, ciphyattach, mii_phy_detach, mii_phy_activate); static int ciphy_service(struct mii_softc *, struct mii_data *, int); static void ciphy_status(struct mii_softc *); static void ciphy_reset(struct mii_softc *); static void ciphy_fixup(struct mii_softc *); static const struct mii_phy_funcs ciphy_funcs = { ciphy_service, ciphy_status, mii_phy_reset, }; static const struct mii_phydesc ciphys[] = { { MII_OUI_xxCICADA, MII_MODEL_xxCICADA_CIS8201, MII_STR_xxCICADA_CIS8201 }, { MII_OUI_xxCICADA, MII_MODEL_xxCICADA_CIS8201A, MII_STR_xxCICADA_CIS8201A }, { MII_OUI_xxCICADA, MII_MODEL_xxCICADA_CIS8201B, MII_STR_xxCICADA_CIS8201B }, { MII_OUI_xxCICADA, MII_MODEL_xxCICADA_CIS8204, MII_STR_xxCICADA_CIS8204 }, { MII_OUI_xxCICADA, MII_MODEL_xxCICADA_VSC8211, MII_STR_xxCICADA_VSC8211 }, { MII_OUI_xxCICADA, MII_MODEL_xxCICADA_VSC8221, MII_STR_xxCICADA_VSC8221 }, { MII_OUI_xxCICADA, MII_MODEL_xxCICADA_VSC8234, MII_STR_xxCICADA_VSC8234 }, { MII_OUI_xxCICADA, MII_MODEL_xxCICADA_VSC8244, MII_STR_xxCICADA_VSC8244 }, { MII_OUI_xxVITESSE, MII_MODEL_xxVITESSE_VSC8601, MII_STR_xxVITESSE_VSC8601 }, { MII_OUI_xxVITESSE, MII_MODEL_xxVITESSE_VSC8641, MII_STR_xxVITESSE_VSC8641 }, { 0, 0, NULL }, }; static int ciphymatch(device_t parent, cfdata_t match, void *aux) { struct mii_attach_args *ma = aux; if (mii_phy_match(ma, ciphys) != NULL) return 10; return 0; } static void ciphyattach(device_t parent, device_t self, void *aux) { struct mii_softc *sc = device_private(self); struct mii_attach_args *ma = aux; struct mii_data *mii = ma->mii_data; const struct mii_phydesc *mpd; mpd = mii_phy_match(ma, ciphys); aprint_naive(": Media interface\n"); aprint_normal(": %s, rev. %d\n", mpd->mpd_name, MII_REV(ma->mii_id2)); sc->mii_dev = self; sc->mii_inst = mii->mii_instance; sc->mii_phy = ma->mii_phyno; sc->mii_funcs = &ciphy_funcs; sc->mii_pdata = mii; sc->mii_flags = ma->mii_flags; sc->mii_anegticks = MII_ANEGTICKS; sc->mii_flags |= MIIF_NOISOLATE; ciphy_reset(sc); sc->mii_capabilities = PHY_READ(sc, MII_BMSR) & ma->mii_capmask; if (sc->mii_capabilities & BMSR_EXTSTAT) sc->mii_extcapabilities = PHY_READ(sc, MII_EXTSR); aprint_normal_dev(self, ""); if ((sc->mii_capabilities & BMSR_MEDIAMASK) == 0) aprint_error("no media present"); else mii_phy_add_media(sc); aprint_normal("\n"); } static int ciphy_service(struct mii_softc *sc, struct mii_data *mii, int cmd) { struct ifmedia_entry *ife = mii->mii_media.ifm_cur; int reg, speed, gig; switch (cmd) { case MII_POLLSTAT: /* If we're not polling our PHY instance, just return. */ if (IFM_INST(ife->ifm_media) != sc->mii_inst) return 0; break; case MII_MEDIACHG: /* * If the media indicates a different PHY instance, * isolate ourselves. */ if (IFM_INST(ife->ifm_media) != sc->mii_inst) { reg = PHY_READ(sc, MII_BMCR); PHY_WRITE(sc, MII_BMCR, reg | BMCR_ISO); return 0; } /* If the interface is not up, don't do anything. */ if ((mii->mii_ifp->if_flags & IFF_UP) == 0) break; ciphy_fixup(sc); /* XXX hardware bug work-around */ switch (IFM_SUBTYPE(ife->ifm_media)) { case IFM_AUTO: #ifdef foo /* If we're already in auto mode, just return. */ if (PHY_READ(sc, MII_BMCR) & BMCR_AUTOEN) return 0; #endif (void) mii_phy_auto(sc, 0); break; case IFM_1000_T: speed = BMCR_S1000; goto setit; case IFM_100_TX: speed = BMCR_S100; goto setit; case IFM_10_T: speed = BMCR_S10; setit: if ((ife->ifm_media & IFM_FDX) != 0) { speed |= BMCR_FDX; gig = GTCR_ADV_1000TFDX; } else gig = GTCR_ADV_1000THDX; PHY_WRITE(sc, MII_100T2CR, 0); PHY_WRITE(sc, MII_BMCR, speed); PHY_WRITE(sc, MII_ANAR, ANAR_CSMA); if (IFM_SUBTYPE(ife->ifm_media) != IFM_1000_T) break; PHY_WRITE(sc, MII_100T2CR, gig); PHY_WRITE(sc, MII_BMCR, speed | BMCR_AUTOEN | BMCR_STARTNEG); /* * When setting the link manually, one side must * be the master and the other the slave. However * ifmedia doesn't give us a good way to specify * this, so we fake it by using one of the LINK * flags. If LINK0 is set, we program the PHY to * be a master, otherwise it's a slave. */ if ((mii->mii_ifp->if_flags & IFF_LINK0)) { PHY_WRITE(sc, MII_100T2CR, gig | GTCR_MAN_MS | GTCR_ADV_MS); } else PHY_WRITE(sc, MII_100T2CR, gig | GTCR_MAN_MS); break; case IFM_NONE: PHY_WRITE(sc, MII_BMCR, BMCR_ISO | BMCR_PDOWN); break; case IFM_100_T4: default: return EINVAL; } break; case MII_TICK: /* If we're not currently selected, just return. */ if (IFM_INST(ife->ifm_media) != sc->mii_inst) return 0; /* Is the interface even up? */ if ((mii->mii_ifp->if_flags & IFF_UP) == 0) return 0; /* Only used for autonegotiation. */ if ((IFM_SUBTYPE(ife->ifm_media) != IFM_AUTO) && (IFM_SUBTYPE(ife->ifm_media) != IFM_1000_T)) { /* * Reset autonegotiation timer to 0 just to make sure * the future autonegotiation start with 0. */ sc->mii_ticks = 0; break; } /* * Check to see if we have link. If we do, we don't * need to restart the autonegotiation process. Read * the BMSR twice in case it's latched. */ reg = PHY_READ(sc, MII_BMSR) | PHY_READ(sc, MII_BMSR); if (reg & BMSR_LINK) { /* * Reset autonegotiation timer to 0 in case the link * goes down in the next tick. */ sc->mii_ticks = 0; /* See above. */ break; } /* * mii_ticks == 0 means it's the first tick after changing the * media or the link became down since the last tick * (see above), so return with 0 to update the status. */ if (sc->mii_ticks++ == 0) break; /* Only retry autonegotiation every N seconds. */ if (sc->mii_ticks <= MII_ANEGTICKS_GIGE) break; mii_phy_auto(sc, 0); return 0; } /* Update the media status. */ ciphy_status(sc); /* * Callback if something changed. Note that we need to poke * apply fixups for certain PHY revs. */ if (sc->mii_media_active != mii->mii_media_active || sc->mii_media_status != mii->mii_media_status || cmd == MII_MEDIACHG) { ciphy_fixup(sc); } mii_phy_update(sc, cmd); return 0; } static void ciphy_status(struct mii_softc *sc) { struct mii_data *mii = sc->mii_pdata; int bmsr, bmcr, gtsr; mii->mii_media_status = IFM_AVALID; mii->mii_media_active = IFM_ETHER; bmsr = PHY_READ(sc, MII_BMSR) | PHY_READ(sc, MII_BMSR); if (bmsr & BMSR_LINK) mii->mii_media_status |= IFM_ACTIVE; bmcr = PHY_READ(sc, MII_BMCR); if (bmcr & BMCR_LOOP) mii->mii_media_active |= IFM_LOOP; if (bmcr & BMCR_AUTOEN) { if ((bmsr & BMSR_ACOMP) == 0) { /* Erg, still trying, I guess... */ mii->mii_media_active |= IFM_NONE; return; } } bmsr = PHY_READ(sc, CIPHY_MII_AUXCSR); switch (bmsr & CIPHY_AUXCSR_SPEED) { case CIPHY_SPEED10: mii->mii_media_active |= IFM_10_T; break; case CIPHY_SPEED100: mii->mii_media_active |= IFM_100_TX; break; case CIPHY_SPEED1000: mii->mii_media_active |= IFM_1000_T; break; default: aprint_error_dev(sc->mii_dev, "unknown PHY speed %x\n", bmsr & CIPHY_AUXCSR_SPEED); break; } if (bmsr & CIPHY_AUXCSR_FDX) mii->mii_media_active |= IFM_FDX | mii_phy_flowstatus(sc); else mii->mii_media_active |= IFM_HDX; if (IFM_SUBTYPE(mii->mii_media_active) == IFM_1000_T) { gtsr = PHY_READ(sc, MII_100T2SR); if ((gtsr & GTSR_MS_RES) != 0) mii->mii_media_active |= IFM_ETH_MASTER; } } static void ciphy_reset(struct mii_softc *sc) { mii_phy_reset(sc); DELAY(1000); } #define PHY_SETBIT(x, y, z) \ PHY_WRITE(x, y, (PHY_READ(x, y) | (z))) #define PHY_CLRBIT(x, y, z) \ PHY_WRITE(x, y, (PHY_READ(x, y) & ~(z))) static void ciphy_fixup(struct mii_softc *sc) { uint16_t model; uint16_t status, speed; model = MII_MODEL(PHY_READ(sc, MII_PHYIDR2)); status = PHY_READ(sc, CIPHY_MII_AUXCSR); speed = status & CIPHY_AUXCSR_SPEED; if (device_is_a(device_parent(sc->mii_dev), "nfe")) { /* Need to set for 2.5V RGMII for NVIDIA adapters */ PHY_SETBIT(sc, CIPHY_MII_ECTL1, CIPHY_INTSEL_RGMII); PHY_SETBIT(sc, CIPHY_MII_ECTL1, CIPHY_IOVOL_2500MV); } switch (model) { case MII_MODEL_xxCICADA_CIS8201: case MII_MODEL_xxCICADA_CIS8204: /* Turn off "aux mode" (whatever that means) */ PHY_SETBIT(sc, CIPHY_MII_AUXCSR, CIPHY_AUXCSR_MDPPS); /* * Work around speed polling bug in VT3119/VT3216 * when using MII in full duplex mode. */ if ((speed == CIPHY_SPEED10 || speed == CIPHY_SPEED100) && (status & CIPHY_AUXCSR_FDX)) PHY_SETBIT(sc, CIPHY_MII_10BTCSR, CIPHY_10BTCSR_ECHO); else PHY_CLRBIT(sc, CIPHY_MII_10BTCSR, CIPHY_10BTCSR_ECHO); /* Enable link/activity LED blink. */ PHY_SETBIT(sc, CIPHY_MII_LED, CIPHY_LED_LINKACTBLINK); break; case MII_MODEL_xxCICADA_CIS8201A: case MII_MODEL_xxCICADA_CIS8201B: /* * Work around speed polling bug in VT3119/VT3216 * when using MII in full duplex mode. */ if ((speed == CIPHY_SPEED10 || speed == CIPHY_SPEED100) && (status & CIPHY_AUXCSR_FDX)) PHY_SETBIT(sc, CIPHY_MII_10BTCSR, CIPHY_10BTCSR_ECHO); else PHY_CLRBIT(sc, CIPHY_MII_10BTCSR, CIPHY_10BTCSR_ECHO); break; case MII_MODEL_xxCICADA_VSC8211: case MII_MODEL_xxCICADA_VSC8221: case MII_MODEL_xxCICADA_VSC8234: case MII_MODEL_xxCICADA_VSC8244: case MII_MODEL_xxVITESSE_VSC8601: case MII_MODEL_xxVITESSE_VSC8641: break; default: aprint_error_dev(sc->mii_dev, "unknown CICADA PHY model %x\n", model); break; } }