/* $NetBSD: gphyter.c,v 1.30 2016/07/07 06:55:41 msaitoh Exp $ */ /*- * Copyright (c) 1998, 1999, 2000, 2001 The NetBSD Foundation, Inc. * All rights reserved. * * This code is derived from software contributed to The NetBSD Foundation * by Jason R. Thorpe of the Numerical Aerospace Simulation Facility, * NASA Ames Research Center. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE * POSSIBILITY OF SUCH DAMAGE. */ /* * Copyright (c) 1997 Manuel Bouyer. All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ /* * driver for National Semiconductor's DP83891, DP83861 and DP83865 * `Gig PHYTER' ethernet 10/100/1000 PHYs. The DP83891 is an older, * non-firmware-driven version of the DP83861. The DP83865 is a low * power version of the DP83861. * * Data Sheets available from www.national.com: * http://www.national.com/ds/DP/DP83861.pdf * http://www.national.com/ds/DP/DP83865.pdf */ #include __KERNEL_RCSID(0, "$NetBSD: gphyter.c,v 1.30 2016/07/07 06:55:41 msaitoh Exp $"); #include #include #include #include #include #include #include #include #include #include #include #include static int gphytermatch(device_t, cfdata_t, void *); static void gphyterattach(device_t, device_t, void *); CFATTACH_DECL_NEW(gphyter, sizeof(struct mii_softc), gphytermatch, gphyterattach, mii_phy_detach, mii_phy_activate); static int gphyter_service(struct mii_softc *, struct mii_data *, int); static void gphyter_status(struct mii_softc *); static void gphyter_reset(struct mii_softc *); static const struct mii_phy_funcs gphyter_funcs = { gphyter_service, gphyter_status, gphyter_reset, }; static const struct mii_phydesc gphyters[] = { { MII_OUI_xxNATSEMI, MII_MODEL_xxNATSEMI_DP83861, MII_STR_xxNATSEMI_DP83861 }, { MII_OUI_xxNATSEMI, MII_MODEL_xxNATSEMI_DP83865, MII_STR_xxNATSEMI_DP83865 }, { MII_OUI_xxNATSEMI, MII_MODEL_xxNATSEMI_DP83891, MII_STR_xxNATSEMI_DP83891 }, { 0, 0, NULL }, }; static int gphytermatch(device_t parent, cfdata_t match, void *aux) { struct mii_attach_args *ma = aux; if (mii_phy_match(ma, gphyters) != NULL) return (10); return (0); } static void gphyterattach(device_t parent, device_t self, void *aux) { struct mii_softc *sc = device_private(self); struct mii_attach_args *ma = aux; struct mii_data *mii = ma->mii_data; const struct mii_phydesc *mpd; int anar, strap; mpd = mii_phy_match(ma, gphyters); aprint_naive(": Media interface\n"); aprint_normal(": %s, rev. %d\n", mpd->mpd_name, MII_REV(ma->mii_id2)); sc->mii_dev = self; sc->mii_inst = mii->mii_instance; sc->mii_phy = ma->mii_phyno; sc->mii_funcs = &gphyter_funcs; sc->mii_pdata = mii; sc->mii_flags = ma->mii_flags; sc->mii_anegticks = MII_ANEGTICKS; PHY_RESET(sc); sc->mii_capabilities = PHY_READ(sc, MII_BMSR) & ma->mii_capmask; if (sc->mii_capabilities & BMSR_EXTSTAT) sc->mii_extcapabilities = PHY_READ(sc, MII_EXTSR); /* * The Gig PHYTER seems to have the 10baseT BMSR bits * hard-wired to 0, even though the device supports * 10baseT. What we do instead is read the post-reset * ANAR, who's 10baseT-related bits are set by strapping * pin 180, and fake the BMSR bits. */ anar = PHY_READ(sc, MII_ANAR); if (anar & ANAR_10) sc->mii_capabilities |= (BMSR_10THDX & ma->mii_capmask); if (anar & ANAR_10_FD) sc->mii_capabilities |= (BMSR_10TFDX & ma->mii_capmask); aprint_normal_dev(self, ""); if ((sc->mii_capabilities & BMSR_MEDIAMASK) == 0 && (sc->mii_extcapabilities & EXTSR_MEDIAMASK) == 0) aprint_error("no media present"); else mii_phy_add_media(sc); aprint_normal("\n"); strap = PHY_READ(sc, MII_GPHYTER_STRAP); aprint_normal_dev(self, "strapped to %s mode", (strap & STRAP_MS_VAL) ? "master" : "slave"); if (strap & STRAP_NC_MODE) aprint_normal(", pre-C5 BCM5400 compat enabled"); aprint_normal("\n"); } static int gphyter_service(struct mii_softc *sc, struct mii_data *mii, int cmd) { struct ifmedia_entry *ife = mii->mii_media.ifm_cur; int reg; switch (cmd) { case MII_POLLSTAT: /* * If we're not polling our PHY instance, just return. */ if (IFM_INST(ife->ifm_media) != sc->mii_inst) return (0); break; case MII_MEDIACHG: /* * If the media indicates a different PHY instance, * isolate ourselves. */ if (IFM_INST(ife->ifm_media) != sc->mii_inst) { reg = PHY_READ(sc, MII_BMCR); PHY_WRITE(sc, MII_BMCR, reg | BMCR_ISO); return (0); } /* * If the interface is not up, don't do anything. */ if ((mii->mii_ifp->if_flags & IFF_UP) == 0) break; mii_phy_setmedia(sc); break; case MII_TICK: /* * If we're not currently selected, just return. */ if (IFM_INST(ife->ifm_media) != sc->mii_inst) return (0); if (mii_phy_tick(sc) == EJUSTRETURN) return (0); break; case MII_DOWN: mii_phy_down(sc); return (0); } /* Update the media status. */ mii_phy_status(sc); /* Callback if something changed. */ mii_phy_update(sc, cmd); return (0); } static void gphyter_status(struct mii_softc *sc) { struct mii_data *mii = sc->mii_pdata; struct ifmedia_entry *ife = mii->mii_media.ifm_cur; int bmsr, bmcr, physup, gtsr; mii->mii_media_status = IFM_AVALID; mii->mii_media_active = IFM_ETHER; bmsr = PHY_READ(sc, MII_BMSR) | PHY_READ(sc, MII_BMSR); physup = PHY_READ(sc, MII_GPHYTER_PHY_SUP); if (physup & PHY_SUP_LINK) mii->mii_media_status |= IFM_ACTIVE; bmcr = PHY_READ(sc, MII_BMCR); if (bmcr & BMCR_ISO) { mii->mii_media_active |= IFM_NONE; mii->mii_media_status = 0; return; } if (bmcr & BMCR_LOOP) mii->mii_media_active |= IFM_LOOP; if (bmcr & BMCR_AUTOEN) { /* * The media status bits are only valid of autonegotiation * has completed (or it's disabled). */ if ((bmsr & BMSR_ACOMP) == 0) { /* Erg, still trying, I guess... */ mii->mii_media_active |= IFM_NONE; return; } switch (physup & (PHY_SUP_SPEED1|PHY_SUP_SPEED0)) { case PHY_SUP_SPEED1: mii->mii_media_active |= IFM_1000_T; gtsr = PHY_READ(sc, MII_100T2SR); if (gtsr & GTSR_MS_RES) mii->mii_media_active |= IFM_ETH_MASTER; break; case PHY_SUP_SPEED0: mii->mii_media_active |= IFM_100_TX; break; case 0: mii->mii_media_active |= IFM_10_T; break; default: mii->mii_media_active |= IFM_NONE; mii->mii_media_status = 0; } if (physup & PHY_SUP_DUPLEX) mii->mii_media_active |= IFM_FDX | mii_phy_flowstatus(sc); else mii->mii_media_active |= IFM_HDX; } else mii->mii_media_active = ife->ifm_media; } void gphyter_reset(struct mii_softc *sc) { int reg, i; if (sc->mii_flags & MIIF_NOISOLATE) reg = BMCR_RESET; else reg = BMCR_RESET | BMCR_ISO; PHY_WRITE(sc, MII_BMCR, reg); /* * It is best to allow a little time for the reset to settle * in before we start polling the BMCR again. Notably, the * DP83840A manual states that there should be a 500us delay * between asserting software reset and attempting MII serial * operations. Also, a DP83815 can get into a bad state on * cable removal and reinsertion if we do not delay here. */ delay(500); /* Wait another 100ms for it to complete. */ for (i = 0; i < 100; i++) { reg = PHY_READ(sc, MII_BMCR); if ((reg & BMCR_RESET) == 0) break; delay(1000); } if (sc->mii_inst != 0 && ((sc->mii_flags & MIIF_NOISOLATE) == 0)) PHY_WRITE(sc, MII_BMCR, reg | BMCR_ISO); }