/* $NetBSD: arcmsrvar.h,v 1.15 2016/06/12 02:16:15 christos Exp $ */ /* Derived from $OpenBSD: arc.c,v 1.68 2007/10/27 03:28:27 dlg Exp $ */ /* * Copyright (c) 2007 Juan Romero Pardines * Copyright (c) 2006 David Gwynne * * Permission to use, copy, modify, and distribute this software for any * purpose with or without fee is hereby granted, provided that the above * copyright notice and this permission notice appear in all copies. * * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. */ #ifndef _PCI_ARCMSRVAR_H_ #define _PCI_ARCMSRVAR_H_ #define ARC_PCI_BAR PCI_MAPREG_START #define ARC_REG_INB_MSG0 0x0010 #define ARC_REG_INB_MSG0_NOP (0x00000000) #define ARC_REG_INB_MSG0_GET_CONFIG (0x00000001) #define ARC_REG_INB_MSG0_SET_CONFIG (0x00000002) #define ARC_REG_INB_MSG0_ABORT_CMD (0x00000003) #define ARC_REG_INB_MSG0_STOP_BGRB (0x00000004) #define ARC_REG_INB_MSG0_FLUSH_CACHE (0x00000005) #define ARC_REG_INB_MSG0_START_BGRB (0x00000006) #define ARC_REG_INB_MSG0_CHK331PENDING (0x00000007) #define ARC_REG_INB_MSG0_SYNC_TIMER (0x00000008) #define ARC_REG_INB_MSG1 0x0014 #define ARC_REG_OUTB_ADDR0 0x0018 #define ARC_REG_OUTB_ADDR1 0x001c #define ARC_REG_OUTB_ADDR1_FIRMWARE_OK (1<<31) #define ARC_REG_INB_DOORBELL 0x0020 #define ARC_REG_INB_DOORBELL_WRITE_OK (1<<0) #define ARC_REG_INB_DOORBELL_READ_OK (1<<1) #define ARC_REG_OUTB_DOORBELL 0x002c #define ARC_REG_OUTB_DOORBELL_WRITE_OK (1<<0) #define ARC_REG_OUTB_DOORBELL_READ_OK (1<<1) #define ARC_REG_INTRSTAT 0x0030 #define ARC_REG_INTRSTAT_MSG0 (1<<0) #define ARC_REG_INTRSTAT_MSG1 (1<<1) #define ARC_REG_INTRSTAT_DOORBELL (1<<2) #define ARC_REG_INTRSTAT_POSTQUEUE (1<<3) #define ARC_REG_INTRSTAT_PCI (1<<4) #define ARC_REG_INTRMASK 0x0034 #define ARC_REG_INTRMASK_MSG0 (1<<0) #define ARC_REG_INTRMASK_MSG1 (1<<1) #define ARC_REG_INTRMASK_DOORBELL (1<<2) #define ARC_REG_INTRMASK_POSTQUEUE (1<<3) #define ARC_REG_INTRMASK_PCI (1<<4) #define ARC_REG_POST_QUEUE 0x0040 #define ARC_REG_POST_QUEUE_ADDR_SHIFT 5 #define ARC_REG_POST_QUEUE_IAMBIOS (1<<30) #define ARC_REG_POST_QUEUE_BIGFRAME (1<<31) #define ARC_REG_REPLY_QUEUE 0x0044 #define ARC_REG_REPLY_QUEUE_ADDR_SHIFT 5 #define ARC_REG_REPLY_QUEUE_ERR (1<<28) #define ARC_REG_REPLY_QUEUE_IAMBIOS (1<<30) #define ARC_REG_MSGBUF 0x0a00 #define ARC_REG_MSGBUF_LEN 1024 #define ARC_REG_IOC_WBUF_LEN 0x0e00 #define ARC_REG_IOC_WBUF 0x0e04 #define ARC_REG_IOC_RBUF_LEN 0x0f00 #define ARC_REG_IOC_RBUF 0x0f04 #define ARC_REG_IOC_RWBUF_MAXLEN 124 /* for both RBUF and WBUF */ struct arc_msg_firmware_info { uint32_t signature; #define ARC_FWINFO_SIGNATURE_GET_CONFIG (0x87974060) uint32_t request_len; uint32_t queue_len; uint32_t sdram_size; uint32_t sata_ports; uint8_t vendor[40]; uint8_t model[8]; uint8_t fw_version[16]; uint8_t device_map[16]; } __packed; struct arc_msg_scsicmd { uint8_t bus; uint8_t target; uint8_t lun; uint8_t function; uint8_t cdb_len; uint8_t sgl_len; uint8_t flags; #define ARC_MSG_SCSICMD_FLAG_SGL_BSIZE_512 (1<<0) #define ARC_MSG_SCSICMD_FLAG_FROM_BIOS (1<<1) #define ARC_MSG_SCSICMD_FLAG_WRITE (1<<2) #define ARC_MSG_SCSICMD_FLAG_SIMPLEQ (0x00) #define ARC_MSG_SCSICMD_FLAG_HEADQ (0x08) #define ARC_MSG_SCSICMD_FLAG_ORDERQ (0x10) uint8_t reserved; uint32_t context; uint32_t data_len; #define ARC_MSG_CDBLEN 16 uint8_t cdb[ARC_MSG_CDBLEN]; uint8_t status; #define ARC_MSG_STATUS_SELTIMEOUT 0xf0 #define ARC_MSG_STATUS_ABORTED 0xf1 #define ARC_MSG_STATUS_INIT_FAIL 0xf2 #define ARC_MSG_SENSELEN 15 uint8_t sense_data[ARC_MSG_SENSELEN]; /* followed by an sgl */ } __packed; struct arc_sge { uint32_t sg_hdr; #define ARC_SGE_64BIT (1<<24) uint32_t sg_lo_addr; uint32_t sg_hi_addr; } __packed; #define ARC_MAX_TARGET 16 #define ARC_MAX_LUN 8 #define ARC_MAX_IOCMDLEN 512 #define ARC_BLOCKSIZE 512 /* * the firmware deals with up to 256 or 512 byte command frames. */ /* * sizeof(struct arc_msg_scsicmd) + (sizeof(struct arc_sge) * 38) == 508. */ #define ARC_SGL_MAXLEN 38 /* * sizeof(struct arc_msg_scsicmd) + (sizeof(struct arc_sge) * 17) == 252. */ #define ARC_SGL_256LEN 17 struct arc_io_cmd { struct arc_msg_scsicmd cmd; struct arc_sge sgl[ARC_SGL_MAXLEN]; } __packed; /* * definitions of the firmware commands sent via the doorbells. */ struct arc_fw_hdr { uint8_t byte1; uint8_t byte2; uint8_t byte3; } __packed; struct arc_fw_bufhdr { struct arc_fw_hdr hdr; uint16_t len; } __packed; /* Firmware command codes */ #define ARC_FW_CHECK_PASS 0x14 /* opcode + 1 byte length + password */ #define ARC_FW_GETEVENTS 0x1a /* opcode + 1 byte for page 0/1/2/3 */ #define ARC_FW_GETHWMON 0x1b /* opcode + arc_fw_hwmon */ #define ARC_FW_RAIDINFO 0x20 /* opcode + raid# */ #define ARC_FW_VOLINFO 0x21 /* opcode + vol# */ #define ARC_FW_DISKINFO 0x22 /* opcode + physdisk# */ #define ARC_FW_SYSINFO 0x23 /* opcode. reply is fw_sysinfo */ #define ARC_FW_CLEAREVENTS 0x24 /* opcode only */ #define ARC_FW_MUTE_ALARM 0x30 /* opcode only */ #define ARC_FW_SET_ALARM 0x31 /* opcode + 1 byte for setting */ #define ARC_FW_SET_ALARM_DISABLE 0x00 #define ARC_FW_SET_ALARM_ENABLE 0x01 #define ARC_FW_SET_PASS 0x32 /* opcode + 1 byte length + password */ #define ARC_FW_REBUILD_PRIO 0x34 /* Rebuild priority for disks */ #define ARC_FW_REBUILD_PRIO_ULTRALOW (1<<0) #define ARC_FW_REBUILD_PRIO_LOW (1<<1) #define ARC_FW_REBUILD_PRIO_NORMAL (1<<2) #define ARC_FW_REBUILD_PRIO_HIGH (1<<3) #define ARC_FW_SET_MAXATA_MODE 0x35 /* opcode + 1 byte mode */ #define ARC_FW_SET_MAXATA_MODE_133 (1<<0) #define ARC_FW_SET_MAXATA_MODE_100 (1<<1) #define ARC_FW_SET_MAXATA_MODE_66 (1<<2) #define ARC_FW_SET_MAXATA_MODE_33 (1<<3) #define ARC_FW_NOP 0x38 /* opcode only */ /* * Structure for ARC_FW_CREATE_PASSTHRU: * * byte 2 command code 0x40 * byte 3 device # * byte 4 scsi channel (0/1) * byte 5 scsi id (0/15) * byte 6 scsi lun (0/7) * byte 7 tagged queue (1 enabled) * byte 8 cache mode (1 enabled) * byte 9 max speed ((0/1/2/3/4 -> 33/66/100/133/150) */ #define ARC_FW_CREATE_PASSTHRU 0x40 #define ARC_FW_DELETE_PASSTHRU 0x42 /* opcode + device# */ /* * Structure for ARC_FW_CREATE_RAIDSET: * * byte 2 command code 0x50 * byte 3-6 device mask * byte 7-22 raidset name (byte 7 == 0 use default) */ #define ARC_FW_CREATE_RAIDSET 0x50 #define ARC_FW_DELETE_RAIDSET 0x51 /* opcode + raidset# */ #define ARC_FW_CREATE_HOTSPARE 0x54 /* opcode + 4 bytes device mask */ #define ARC_FW_DELETE_HOTSPARE 0x55 /* opcode + 4 bytes device mask */ /* * Structure for ARC_FW_CREATE_VOLUME/ARC_FW_MODIFY_VOLUME: * * byte 2 command code 0x60 * byte 3 raidset# * byte 4-19 volume set name (byte 4 == 0 use default) * byte 20-27 volume capacity in blocks * byte 28 raid level * byte 29 stripe size * byte 30 channel * byte 31 ID * byte 32 LUN * byte 33 1 enable tag queuing * byte 33 1 enable cache * byte 35 speed 0/1/2/3/4 -> 33/66/100/133/150 * byte 36 1 for quick init (only for CREATE_VOLUME) */ #define ARC_FW_CREATE_VOLUME 0x60 #define ARC_FW_MODIFY_VOLUME 0x61 #define ARC_FW_DELETE_VOLUME 0x62 /* opcode + vol# */ #define ARC_FW_START_CHECKVOL 0x63 /* opcode + vol# */ #define ARC_FW_STOP_CHECKVOL 0x64 /* opcode only */ /* Status codes for the firmware command codes */ #define ARC_FW_CMD_OK 0x41 #define ARC_FW_CMD_RAIDINVAL 0x42 #define ARC_FW_CMD_VOLINVAL 0x43 #define ARC_FW_CMD_NORAID 0x44 #define ARC_FW_CMD_NOVOLUME 0x45 #define ARC_FW_CMD_NOPHYSDRV 0x46 #define ARC_FW_CMD_PARAM_ERR 0x47 #define ARC_FW_CMD_UNSUPPORTED 0x48 #define ARC_FW_CMD_DISKCFG_CHGD 0x49 #define ARC_FW_CMD_PASS_INVAL 0x4a #define ARC_FW_CMD_NODISKSPACE 0x4b #define ARC_FW_CMD_CHECKSUM_ERR 0x4c #define ARC_FW_CMD_PASS_REQD 0x4d struct arc_fw_hwmon { uint8_t nfans; uint8_t nvoltages; uint8_t ntemps; uint8_t npower; uint16_t fan0; /* RPM */ uint16_t fan1; /* RPM */ uint16_t voltage_orig0; /* original value * 1000 */ uint16_t voltage_val0; /* value */ uint16_t voltage_orig1; /* original value * 1000 */ uint16_t voltage_val1; /* value */ uint16_t voltage_orig2; uint16_t voltage_val2; uint8_t temp0; uint8_t temp1; uint8_t pwr_indicator; /* (bit0 : power#0, bit1 : power#1) */ uint8_t ups_indicator; } __packed; struct arc_fw_comminfo { uint8_t baud_rate; uint8_t data_bits; uint8_t stop_bits; uint8_t parity; uint8_t flow_control; } __packed; struct arc_fw_scsiattr { uint8_t channel; /* channel for SCSI target (0/1) */ uint8_t target; uint8_t lun; uint8_t tagged; uint8_t cache; uint8_t speed; } __packed; struct arc_fw_raidinfo { uint8_t set_name[16]; uint32_t capacity; uint32_t capacity2; uint32_t fail_mask; uint8_t device_array[32]; uint8_t member_devices; uint8_t new_member_devices; uint8_t raid_state; uint8_t volumes; uint8_t volume_list[16]; uint8_t reserved1[3]; uint8_t free_segments; uint32_t raw_stripes[8]; uint8_t reserved2[12]; } __packed; struct arc_fw_volinfo { uint8_t set_name[16]; uint32_t capacity; uint32_t capacity2; uint32_t fail_mask; uint32_t stripe_size; /* in blocks */ uint32_t new_fail_mask; uint32_t new_stripe_size; uint32_t volume_status; #define ARC_FW_VOL_STATUS_NORMAL 0x00 #define ARC_FW_VOL_STATUS_INITTING (1<<0) #define ARC_FW_VOL_STATUS_FAILED (1<<1) #define ARC_FW_VOL_STATUS_MIGRATING (1<<2) #define ARC_FW_VOL_STATUS_REBUILDING (1<<3) #define ARC_FW_VOL_STATUS_NEED_INIT (1<<4) #define ARC_FW_VOL_STATUS_NEED_MIGRATE (1<<5) #define ARC_FW_VOL_STATUS_INIT_FLAG (1<<6) #define ARC_FW_VOL_STATUS_NEED_REGEN (1<<7) #define ARC_FW_VOL_STATUS_CHECKING (1<<8) #define ARC_FW_VOL_STATUS_NEED_CHECK (1<<9) uint32_t progress; struct arc_fw_scsiattr scsi_attr; uint8_t member_disks; uint8_t raid_level; #define ARC_FW_VOL_RAIDLEVEL_0 0x00 #define ARC_FW_VOL_RAIDLEVEL_1 0x01 #define ARC_FW_VOL_RAIDLEVEL_3 0x02 #define ARC_FW_VOL_RAIDLEVEL_5 0x03 #define ARC_FW_VOL_RAIDLEVEL_6 0x04 #define ARC_FW_VOL_RAIDLEVEL_PASSTHRU 0x05 uint8_t new_member_disks; uint8_t new_raid_level; uint8_t raid_set_number; uint8_t reserved[5]; } __packed; struct arc_fw_diskinfo { uint8_t model[40]; uint8_t serial[20]; uint8_t firmware_rev[8]; uint32_t capacity; uint32_t capacity2; uint8_t device_state; #define ARC_FW_DISK_NORMAL 0x88 /* disk attached/initialized */ #define ARC_FW_DISK_PASSTHRU 0x8a /* pass through disk in normal state */ #define ARC_FW_DISK_HOTSPARE 0xa8 /* hotspare disk in normal state */ #define ARC_FW_DISK_UNUSED 0xc8 /* free/unused disk in normal state */ #define ARC_FW_DISK_FAILED 0x10 /* disk in failed state */ uint8_t pio_mode; uint8_t current_udma_mode; uint8_t udma_mode; uint8_t drive_select; uint8_t raid_number; /* 0xff unowned */ struct arc_fw_scsiattr scsi_attr; uint8_t reserved[40]; } __packed; struct arc_fw_sysinfo { uint8_t vendor_name[40]; uint8_t serial_number[16]; uint8_t firmware_version[16]; uint8_t boot_version[16]; uint8_t mb_version[16]; uint8_t model_name[8]; uint8_t local_ip[4]; uint8_t current_ip[4]; uint32_t time_tick; uint32_t cpu_speed; uint32_t icache; uint32_t dcache; uint32_t scache; uint32_t memory_size; uint32_t memory_speed; uint32_t events; uint8_t gsiMacAddress[6]; uint8_t gsiDhcp; uint8_t alarm; uint8_t channel_usage; uint8_t max_ata_mode; uint8_t sdram_ecc; uint8_t rebuild_priority; struct arc_fw_comminfo comm_a; struct arc_fw_comminfo comm_b; uint8_t ide_channels; uint8_t scsi_host_channels; uint8_t ide_host_channels; uint8_t max_volume_set; uint8_t max_raid_set; uint8_t ether_port; uint8_t raid6_engine; uint8_t reserved[75]; } __packed; /* * autconf(9) glue. */ struct arc_ccb; TAILQ_HEAD(arc_ccb_list, arc_ccb); typedef struct arc_edata { envsys_data_t arc_sensor; int arc_diskid; int arc_volid; } arc_edata_t; struct arc_softc { struct scsipi_channel sc_chan; struct scsipi_adapter sc_adapter; pci_chipset_tag_t sc_pc; pcitag_t sc_tag; bus_space_tag_t sc_iot; bus_space_handle_t sc_ioh; bus_size_t sc_ios; bus_dma_tag_t sc_dmat; void *sc_ih; int sc_req_count; struct arc_dmamem *sc_requests; struct arc_ccb *sc_ccbs; struct arc_ccb_list sc_ccb_free; struct lwp *sc_lwp; volatile int sc_talking; kmutex_t sc_mutex; kcondvar_t sc_condvar; krwlock_t sc_rwlock; struct sysmon_envsys *sc_sme; arc_edata_t *sc_arc_sensors; int sc_nsensors; size_t sc_maxraidset; /* max raid sets */ size_t sc_maxvolset; /* max volume sets */ size_t sc_cchans; /* connected channels */ device_t sc_dev; /* self */ device_t sc_scsibus_dv; }; /* * wrap up the bus_dma api. */ struct arc_dmamem { bus_dmamap_t adm_map; bus_dma_segment_t adm_seg; size_t adm_size; void *adm_kva; }; #define ARC_DMA_MAP(_adm) ((_adm)->adm_map) #define ARC_DMA_DVA(_adm) ((_adm)->adm_map->dm_segs[0].ds_addr) #define ARC_DMA_KVA(_adm) ((void *)(_adm)->adm_kva) /* * stuff to manage a scsi command. */ struct arc_ccb { struct arc_softc *ccb_sc; int ccb_id; struct scsipi_xfer *ccb_xs; bus_dmamap_t ccb_dmamap; bus_addr_t ccb_offset; struct arc_io_cmd *ccb_cmd; uint32_t ccb_cmd_post; TAILQ_ENTRY(arc_ccb) ccb_link; }; #endif /* ! _PCI_ARCMSRVAR_H_ */