/* $NetBSD: if_hme_pci.c,v 1.37 2014/03/29 19:28:24 christos Exp $ */ /* * Copyright (c) 2000 Matthew R. Green * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. */ /* * PCI front-end device driver for the HME ethernet device. */ #include __KERNEL_RCSID(0, "$NetBSD: if_hme_pci.c,v 1.37 2014/03/29 19:28:24 christos Exp $"); #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #define PCI_HME_BASEADDR PCI_BAR(0) struct hme_pci_softc { struct hme_softc hsc_hme; /* HME device */ bus_space_tag_t hsc_memt; bus_space_handle_t hsc_memh; void *hsc_ih; }; int hmematch_pci(device_t, cfdata_t, void *); void hmeattach_pci(device_t, device_t, void *); CFATTACH_DECL_NEW(hme_pci, sizeof(struct hme_pci_softc), hmematch_pci, hmeattach_pci, NULL, NULL); int hmematch_pci(device_t parent, cfdata_t cf, void *aux) { struct pci_attach_args *pa = aux; if (PCI_VENDOR(pa->pa_id) == PCI_VENDOR_SUN && PCI_PRODUCT(pa->pa_id) == PCI_PRODUCT_SUN_HMENETWORK) return (1); return (0); } static inline int hmepromvalid(uint8_t* buf) { return buf[0] == 0x18 && buf[1] == 0x00 && /* structure length */ buf[2] == 0x00 && /* revision */ (buf[3] == 0x00 || /* hme */ buf[3] == 0x80) && /* qfe */ buf[4] == PCI_SUBCLASS_NETWORK_ETHERNET && /* subclass code */ buf[5] == PCI_CLASS_NETWORK; /* class code */ } static inline int hmevpdoff(bus_space_tag_t romt, bus_space_handle_t romh, int vpdoff, int dev) { #define VPDLEN (3 + sizeof(struct pci_vpd) + ETHER_ADDR_LEN) if (bus_space_read_1(romt, romh, vpdoff + VPDLEN) != 0x79 && bus_space_read_1(romt, romh, vpdoff + 4 * VPDLEN) == 0x79) { /* * Use the Nth NA for the Nth HME on * this SUNW,qfe. */ vpdoff += dev * VPDLEN; } return vpdoff; } void hmeattach_pci(device_t parent, device_t self, void *aux) { struct pci_attach_args *pa = aux; struct hme_pci_softc *hsc = device_private(self); struct hme_softc *sc = &hsc->hsc_hme; pci_intr_handle_t ih; pcireg_t csr; const char *intrstr; int type; struct pci_attach_args ebus_pa; prop_data_t eaddrprop; pcireg_t ebus_cl, ebus_id; uint8_t *enaddr; bus_space_tag_t romt; bus_space_handle_t romh; bus_size_t romsize; uint8_t buf[64]; int dataoff, vpdoff; struct pci_vpd *vpd; static const uint8_t promhdr[] = { 0x55, 0xaa }; #define PROMHDR_PTR_DATA 0x18 static const uint8_t promdat[] = { 0x50, 0x43, 0x49, 0x52, /* "PCIR" */ PCI_VENDOR_SUN & 0xff, PCI_VENDOR_SUN >> 8, PCI_PRODUCT_SUN_HMENETWORK & 0xff, PCI_PRODUCT_SUN_HMENETWORK >> 8 }; #define PROMDATA_PTR_VPD 0x08 #define PROMDATA_DATA2 0x0a char intrbuf[PCI_INTRSTR_LEN]; sc->sc_dev = self; aprint_normal(": Sun Happy Meal Ethernet, rev. %d\n", PCI_REVISION(pa->pa_class)); aprint_naive(": Ethernet controller\n"); csr = pci_conf_read(pa->pa_pc, pa->pa_tag, PCI_COMMAND_STATUS_REG); type = pci_mapreg_type(pa->pa_pc, pa->pa_tag, PCI_HME_BASEADDR); /* * enable io/memory-space accesses. this is kinda of gross; but * the hme comes up with neither IO space enabled, or memory space. */ switch (type) { case PCI_MAPREG_TYPE_MEM: csr |= PCI_COMMAND_MEM_ENABLE; sc->sc_bustag = pa->pa_memt; break; case PCI_MAPREG_TYPE_IO: csr |= PCI_COMMAND_IO_ENABLE; sc->sc_bustag = pa->pa_iot; break; } pci_conf_write(pa->pa_pc, pa->pa_tag, PCI_COMMAND_STATUS_REG, csr | PCI_COMMAND_MEM_ENABLE); sc->sc_dmatag = pa->pa_dmat; sc->sc_pci = 1; /* XXXXX should all be done in bus_dma. */ /* * Map five register banks: * * bank 0: HME SEB registers: +0x0000 * bank 1: HME ETX registers: +0x2000 * bank 2: HME ERX registers: +0x4000 * bank 3: HME MAC registers: +0x6000 * bank 4: HME MIF registers: +0x7000 * */ if (pci_mapreg_map(pa, PCI_HME_BASEADDR, type, 0, &hsc->hsc_memt, &hsc->hsc_memh, NULL, NULL) != 0) { aprint_error_dev(self, "unable to map device registers\n"); return; } sc->sc_seb = hsc->hsc_memh; if (bus_space_subregion(hsc->hsc_memt, hsc->hsc_memh, 0x2000, 0x1000, &sc->sc_etx)) { aprint_error_dev(self, "unable to subregion ETX registers\n"); return; } if (bus_space_subregion(hsc->hsc_memt, hsc->hsc_memh, 0x4000, 0x1000, &sc->sc_erx)) { aprint_error_dev(self, "unable to subregion ERX registers\n"); return; } if (bus_space_subregion(hsc->hsc_memt, hsc->hsc_memh, 0x6000, 0x1000, &sc->sc_mac)) { aprint_error_dev(self, "unable to subregion MAC registers\n"); return; } if (bus_space_subregion(hsc->hsc_memt, hsc->hsc_memh, 0x7000, 0x1000, &sc->sc_mif)) { aprint_error_dev(self, "unable to subregion MIF registers\n"); return; } /* * Check if we got a mac-address property passed */ eaddrprop = prop_dictionary_get(device_properties(self), "mac-address"); if (eaddrprop != NULL && prop_data_size(eaddrprop) == ETHER_ADDR_LEN) { memcpy(&sc->sc_enaddr, prop_data_data_nocopy(eaddrprop), ETHER_ADDR_LEN); goto got_eaddr; } /* * Dig out VPD (vital product data) and acquire Ethernet address. * The VPD of hme resides in the Boot PROM (PCI FCode) attached * to the EBus interface. */ /* * ``Writing FCode 3.x Programs'' (newer ones, dated 1997 and later) * chapter 2 describes the data structure. */ enaddr = NULL; /* get a PCI tag for the EBus bridge (function 0 of the same device) */ ebus_pa = *pa; ebus_pa.pa_tag = pci_make_tag(pa->pa_pc, pa->pa_bus, pa->pa_device, 0); ebus_cl = pci_conf_read(ebus_pa.pa_pc, ebus_pa.pa_tag, PCI_CLASS_REG); ebus_id = pci_conf_read(ebus_pa.pa_pc, ebus_pa.pa_tag, PCI_ID_REG); #define PCI_EBUS2_BOOTROM 0x10 if (PCI_CLASS(ebus_cl) == PCI_CLASS_BRIDGE && PCI_PRODUCT(ebus_id) == PCI_PRODUCT_SUN_EBUS && pci_mapreg_map(&ebus_pa, PCI_EBUS2_BOOTROM, PCI_MAPREG_TYPE_MEM, BUS_SPACE_MAP_CACHEABLE | BUS_SPACE_MAP_PREFETCHABLE, &romt, &romh, 0, &romsize) == 0) { /* read PCI Expansion PROM Header */ bus_space_read_region_1(romt, romh, 0, buf, sizeof buf); if (memcmp(buf, promhdr, sizeof promhdr) == 0 && (dataoff = (buf[PROMHDR_PTR_DATA] | (buf[PROMHDR_PTR_DATA + 1] << 8))) >= 0x1c) { /* read PCI Expansion PROM Data */ bus_space_read_region_1(romt, romh, dataoff, buf, sizeof buf); if (memcmp(buf, promdat, sizeof promdat) == 0 && hmepromvalid(buf + PROMDATA_DATA2) && (vpdoff = (buf[PROMDATA_PTR_VPD] | (buf[PROMDATA_PTR_VPD + 1] << 8))) >= 0x1c) { /* * The VPD of hme is not in PCI 2.2 standard * format. The length in the resource header * is in big endian, and resources are not * properly terminated (only one resource * and no end tag). */ vpdoff = hmevpdoff(romt, romh, vpdoff, pa->pa_device); /* read PCI VPD */ bus_space_read_region_1(romt, romh, vpdoff, buf, sizeof buf); vpd = (void *)(buf + 3); if (PCI_VPDRES_ISLARGE(buf[0]) && PCI_VPDRES_LARGE_NAME(buf[0]) == PCI_VPDRES_TYPE_VPD && /* buf[1] == 0 && buf[2] == 9 && */ /*len*/ vpd->vpd_key0 == 0x4e /* N */ && vpd->vpd_key1 == 0x41 /* A */ && vpd->vpd_len == ETHER_ADDR_LEN) { /* * Ethernet address found */ enaddr = buf + 6; } } } bus_space_unmap(romt, romh, romsize); } if (enaddr) { memcpy(sc->sc_enaddr, enaddr, ETHER_ADDR_LEN); goto got_eaddr; } aprint_error_dev(self, "no Ethernet address found\n"); got_eaddr: /* * Map and establish our interrupt. */ if (pci_intr_map(pa, &ih) != 0) { aprint_error_dev(self, "unable to map interrupt\n"); return; } intrstr = pci_intr_string(pa->pa_pc, ih, intrbuf, sizeof(intrbuf)); hsc->hsc_ih = pci_intr_establish(pa->pa_pc, ih, IPL_NET, hme_intr, sc); if (hsc->hsc_ih == NULL) { aprint_error_dev(self, "unable to establish interrupt"); if (intrstr != NULL) aprint_error(" at %s", intrstr); aprint_error("\n"); return; } aprint_normal_dev(self, "interrupting at %s\n", intrstr); sc->sc_burst = 16; /* XXX */ /* Finish off the attach. */ hme_config(sc); }