/* $NetBSD: ppb.c,v 1.63.2.3 2021/12/03 19:45:13 martin Exp $ */ /* * Copyright (c) 1996, 1998 Christopher G. Demetriou. All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. All advertising materials mentioning features or use of this software * must display the following acknowledgement: * This product includes software developed by Christopher G. Demetriou * for the NetBSD Project. * 4. The name of the author may not be used to endorse or promote products * derived from this software without specific prior written permission * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ #include __KERNEL_RCSID(0, "$NetBSD: ppb.c,v 1.63.2.3 2021/12/03 19:45:13 martin Exp $"); #include #include #include #include #include #include #include #include #include #include #define PCIE_SLCSR_ENABLE_MASK \ (PCIE_SLCSR_ABE | PCIE_SLCSR_PFE | PCIE_SLCSR_MSE | \ PCIE_SLCSR_PDE | PCIE_SLCSR_CCE | PCIE_SLCSR_HPE | \ PCIE_SLCSR_DLLSCE) #define PCIE_SLCSR_STATCHG_MASK \ (PCIE_SLCSR_ABP | PCIE_SLCSR_PFD | PCIE_SLCSR_MSC | \ PCIE_SLCSR_PDC | PCIE_SLCSR_CC | PCIE_SLCSR_LACS) static const char pcie_linkspeed_strings[5][5] = { "1.25", "2.5", "5.0", "8.0", "16.0" }; int ppb_printevent = 0; /* Print event type if the value is not 0 */ static int ppbmatch(device_t, cfdata_t, void *); static void ppbattach(device_t, device_t, void *); static int ppbdetach(device_t, int); static void ppbchilddet(device_t, device_t); #ifdef PPB_USEINTR static int ppb_intr(void *); #endif static bool ppb_resume(device_t, const pmf_qual_t *); static bool ppb_suspend(device_t, const pmf_qual_t *); CFATTACH_DECL3_NEW(ppb, sizeof(struct ppb_softc), ppbmatch, ppbattach, ppbdetach, NULL, NULL, ppbchilddet, DVF_DETACH_SHUTDOWN); static int ppbmatch(device_t parent, cfdata_t match, void *aux) { struct pci_attach_args *pa = aux; /* * Check the ID register to see that it's a PCI bridge. * If it is, we assume that we can deal with it; it _should_ * work in a standardized way... */ if (PCI_CLASS(pa->pa_class) == PCI_CLASS_BRIDGE && PCI_SUBCLASS(pa->pa_class) == PCI_SUBCLASS_BRIDGE_PCI) return 1; #ifdef __powerpc__ if (PCI_CLASS(pa->pa_class) == PCI_CLASS_PROCESSOR && PCI_SUBCLASS(pa->pa_class) == PCI_SUBCLASS_PROCESSOR_POWERPC) { pcireg_t bhlc = pci_conf_read(pa->pa_pc, pa->pa_tag, PCI_BHLC_REG); if (PCI_VENDOR(pa->pa_id) == PCI_VENDOR_FREESCALE && PCI_HDRTYPE(bhlc) == PCI_HDRTYPE_RC) return 1; } #endif #ifdef _MIPS_PADDR_T_64BIT /* The LDT HB acts just like a PPB. */ if (PCI_VENDOR(pa->pa_id) == PCI_VENDOR_SIBYTE && PCI_PRODUCT(pa->pa_id) == PCI_PRODUCT_SIBYTE_BCM1250_LDTHB) return 1; #endif return 0; } static void ppb_print_pcie(device_t self) { struct ppb_softc *sc = device_private(self); pcireg_t reg; int off, capversion, devtype; if (!pci_get_capability(sc->sc_pc, sc->sc_tag, PCI_CAP_PCIEXPRESS, &off, ®)) return; /* Not a PCIe device */ capversion = PCIE_XCAP_VER(reg); devtype = PCIE_XCAP_TYPE(reg); aprint_normal_dev(self, "PCI Express capability version "); switch (capversion) { case PCIE_XCAP_VER_1: aprint_normal("1"); break; case PCIE_XCAP_VER_2: aprint_normal("2"); break; default: aprint_normal_dev(self, "unsupported (%d)\n", capversion); return; } aprint_normal(" <"); switch (devtype) { case PCIE_XCAP_TYPE_PCIE_DEV: aprint_normal("PCI-E Endpoint device"); break; case PCIE_XCAP_TYPE_PCI_DEV: aprint_normal("Legacy PCI-E Endpoint device"); break; case PCIE_XCAP_TYPE_RP: aprint_normal("Root Port of PCI-E Root Complex"); break; case PCIE_XCAP_TYPE_UP: aprint_normal("Upstream Port of PCI-E Switch"); break; case PCIE_XCAP_TYPE_DOWN: aprint_normal("Downstream Port of PCI-E Switch"); break; case PCIE_XCAP_TYPE_PCIE2PCI: aprint_normal("PCI-E to PCI/PCI-X Bridge"); break; case PCIE_XCAP_TYPE_PCI2PCIE: aprint_normal("PCI/PCI-X to PCI-E Bridge"); break; default: aprint_normal("Device/Port Type %x", devtype); break; } switch (devtype) { case PCIE_XCAP_TYPE_RP: case PCIE_XCAP_TYPE_DOWN: case PCIE_XCAP_TYPE_PCI2PCIE: reg = pci_conf_read(sc->sc_pc, sc->sc_tag, off + PCIE_LCAP); u_int mlw = __SHIFTOUT(reg, PCIE_LCAP_MAX_WIDTH); u_int mls = __SHIFTOUT(reg, PCIE_LCAP_MAX_SPEED); if (mls < __arraycount(pcie_linkspeed_strings)) { aprint_normal("> x%d @ %sGT/s\n", mlw, pcie_linkspeed_strings[mls]); } else { aprint_normal("> x%d @ %d.%dGT/s\n", mlw, (mls * 25) / 10, (mls * 25) % 10); } reg = pci_conf_read(sc->sc_pc, sc->sc_tag, off + PCIE_LCSR); if (reg & PCIE_LCSR_DLACTIVE) { /* DLLA */ u_int lw = __SHIFTOUT(reg, PCIE_LCSR_NLW); u_int ls = __SHIFTOUT(reg, PCIE_LCSR_LINKSPEED); if (lw != mlw || ls != mls) { if (ls < __arraycount(pcie_linkspeed_strings)) { aprint_normal_dev(self, "link is x%d @ %sGT/s\n", lw, pcie_linkspeed_strings[ls]); } else { aprint_normal_dev(self, "link is x%d @ %d.%dGT/s\n", lw, (ls * 25) / 10, (ls * 25) % 10); } } } break; default: aprint_normal(">\n"); break; } } static void ppbattach(device_t parent, device_t self, void *aux) { struct ppb_softc *sc = device_private(self); struct pci_attach_args *pa = aux; pci_chipset_tag_t pc = pa->pa_pc; struct pcibus_attach_args pba; #ifdef PPB_USEINTR char const *intrstr; char intrbuf[PCI_INTRSTR_LEN]; #endif pcireg_t busdata, reg; bool second_configured = false; pci_aprint_devinfo(pa, NULL); sc->sc_pc = pc; sc->sc_tag = pa->pa_tag; sc->sc_dev = self; busdata = pci_conf_read(pc, pa->pa_tag, PPB_REG_BUSINFO); if (PPB_BUSINFO_SECONDARY(busdata) == 0) { aprint_normal_dev(self, "not configured by system firmware\n"); return; } ppb_print_pcie(self); #if 0 /* * XXX can't do this, because we're not given our bus number * (we shouldn't need it), and because we've no way to * decompose our tag. */ /* sanity check. */ if (pa->pa_bus != PPB_BUSINFO_PRIMARY(busdata)) panic("ppbattach: bus in tag (%d) != bus in reg (%d)", pa->pa_bus, PPB_BUSINFO_PRIMARY(busdata)); #endif /* Check for PCI Express capabilities and setup hotplug support. */ if (pci_get_capability(pc, pa->pa_tag, PCI_CAP_PCIEXPRESS, &sc->sc_pciecapoff, ®) && (reg & PCIE_XCAP_SI)) { /* * First, disable all interrupts because BIOS might * enable them. */ reg = pci_conf_read(sc->sc_pc, sc->sc_tag, sc->sc_pciecapoff + PCIE_SLCSR); if (reg & PCIE_SLCSR_ENABLE_MASK) { reg &= ~PCIE_SLCSR_ENABLE_MASK; pci_conf_write(sc->sc_pc, sc->sc_tag, sc->sc_pciecapoff + PCIE_SLCSR, reg); } #ifdef PPB_USEINTR #if 0 /* notyet */ /* * XXX Initialize workqueue or something else for * HotPlug support. */ #endif if (pci_intr_alloc(pa, &sc->sc_pihp, NULL, 0) == 0) sc->sc_intrhand = pci_intr_establish_xname(pc, sc->sc_pihp[0], IPL_BIO, ppb_intr, sc, device_xname(sc->sc_dev)); #endif } #ifdef PPB_USEINTR if (sc->sc_intrhand != NULL) { pcireg_t slcap, slcsr, val; intrstr = pci_intr_string(pc, sc->sc_pihp[0], intrbuf, sizeof(intrbuf)); aprint_normal_dev(self, "%s\n", intrstr); /* Clear any pending events */ slcsr = pci_conf_read(pc, pa->pa_tag, sc->sc_pciecapoff + PCIE_SLCSR); pci_conf_write(pc, pa->pa_tag, sc->sc_pciecapoff + PCIE_SLCSR, slcsr); /* Enable interrupt. */ val = 0; slcap = pci_conf_read(pc, pa->pa_tag, sc->sc_pciecapoff + PCIE_SLCAP); if (slcap & PCIE_SLCAP_ABP) val |= PCIE_SLCSR_ABE; if (slcap & PCIE_SLCAP_PCP) val |= PCIE_SLCSR_PFE; if (slcap & PCIE_SLCAP_MSP) val |= PCIE_SLCSR_MSE; #if 0 /* * XXX Disable for a while because setting * PCIE_SLCSR_CCE makes break device access on * some environment. */ if ((slcap & PCIE_SLCAP_NCCS) == 0) val |= PCIE_SLCSR_CCE; #endif /* Attention indicator off by default */ if (slcap & PCIE_SLCAP_AIP) { val |= __SHIFTIN(PCIE_SLCSR_IND_OFF, PCIE_SLCSR_AIC); } /* Power indicator */ if (slcap & PCIE_SLCAP_PIP) { /* * Indicator off: * a) card not present * b) power fault * c) MRL sensor off */ if (((slcsr & PCIE_SLCSR_PDS) == 0) || ((slcsr & PCIE_SLCSR_PFD) != 0) || (((slcap & PCIE_SLCAP_MSP) != 0) && ((slcsr & PCIE_SLCSR_MS) != 0))) val |= __SHIFTIN(PCIE_SLCSR_IND_OFF, PCIE_SLCSR_PIC); else val |= __SHIFTIN(PCIE_SLCSR_IND_ON, PCIE_SLCSR_PIC); } val |= PCIE_SLCSR_DLLSCE | PCIE_SLCSR_HPE | PCIE_SLCSR_PDE; slcsr = val; pci_conf_write(pc, pa->pa_tag, sc->sc_pciecapoff + PCIE_SLCSR, slcsr); /* Attach event counters */ evcnt_attach_dynamic(&sc->sc_ev_intr, EVCNT_TYPE_INTR, NULL, device_xname(sc->sc_dev), "Interrupt"); evcnt_attach_dynamic(&sc->sc_ev_abp, EVCNT_TYPE_MISC, NULL, device_xname(sc->sc_dev), "Attention Button Pressed"); evcnt_attach_dynamic(&sc->sc_ev_pfd, EVCNT_TYPE_MISC, NULL, device_xname(sc->sc_dev), "Power Fault Detected"); evcnt_attach_dynamic(&sc->sc_ev_msc, EVCNT_TYPE_MISC, NULL, device_xname(sc->sc_dev), "MRL Sensor Changed"); evcnt_attach_dynamic(&sc->sc_ev_pdc, EVCNT_TYPE_MISC, NULL, device_xname(sc->sc_dev), "Presence Detect Changed"); evcnt_attach_dynamic(&sc->sc_ev_cc, EVCNT_TYPE_MISC, NULL, device_xname(sc->sc_dev), "Command Completed"); evcnt_attach_dynamic(&sc->sc_ev_lacs, EVCNT_TYPE_MISC, NULL, device_xname(sc->sc_dev), "Data Link Layer State Changed"); } #endif /* PPB_USEINTR */ /* Configuration test */ if (PPB_BUSINFO_SECONDARY(busdata) != 0) { uint32_t base, limit; /* I/O region test */ reg = pci_conf_read(pc, pa->pa_tag, PCI_BRIDGE_STATIO_REG); base = (reg & PCI_BRIDGE_STATIO_IOBASE_MASK) << 8; limit = ((reg >> PCI_BRIDGE_STATIO_IOLIMIT_SHIFT) & PCI_BRIDGE_STATIO_IOLIMIT_MASK) << 8; limit |= 0x00000fff; if (PCI_BRIDGE_IO_32BITS(reg)) { reg = pci_conf_read(pc, pa->pa_tag, PCI_BRIDGE_IOHIGH_REG); base |= ((reg >> PCI_BRIDGE_IOHIGH_BASE_SHIFT) & 0xffff) << 16; limit |= ((reg >> PCI_BRIDGE_IOHIGH_LIMIT_SHIFT) & 0xffff) << 16; } if (base < limit) { second_configured = true; goto configure; } /* Non-prefetchable memory region test */ reg = pci_conf_read(pc, pa->pa_tag, PCI_BRIDGE_MEMORY_REG); base = ((reg >> PCI_BRIDGE_MEMORY_BASE_SHIFT) & PCI_BRIDGE_MEMORY_BASE_MASK) << 20; limit = (((reg >> PCI_BRIDGE_MEMORY_LIMIT_SHIFT) & PCI_BRIDGE_MEMORY_LIMIT_MASK) << 20) | 0x000fffff; if (base < limit) { second_configured = true; goto configure; } /* Prefetchable memory region test */ reg = pci_conf_read(pc, pa->pa_tag, PCI_BRIDGE_PREFETCHMEM_REG); base = ((reg >> PCI_BRIDGE_PREFETCHMEM_BASE_SHIFT) & PCI_BRIDGE_PREFETCHMEM_BASE_MASK) << 20; limit = (((reg >> PCI_BRIDGE_PREFETCHMEM_LIMIT_SHIFT) & PCI_BRIDGE_PREFETCHMEM_LIMIT_MASK) << 20) | 0x000fffff; if (PCI_BRIDGE_PREFETCHMEM_64BITS(reg)) { reg = pci_conf_read(pc, pa->pa_tag, PCI_BRIDGE_IOHIGH_REG); base |= (uint64_t)pci_conf_read(pc, pa->pa_tag, PCI_BRIDGE_PREFETCHBASE32_REG) << 32; limit |= (uint64_t)pci_conf_read(pc, pa->pa_tag, PCI_BRIDGE_PREFETCHLIMIT32_REG) << 32; } if (base < limit) { second_configured = true; goto configure; } } configure: /* * If the secondary bus is configured and the bus mastering is not * enabled, enable it. */ if (second_configured) { reg = pci_conf_read(pc, pa->pa_tag, PCI_COMMAND_STATUS_REG); if ((reg & PCI_COMMAND_MASTER_ENABLE) == 0) pci_conf_write(pc, pa->pa_tag, PCI_COMMAND_STATUS_REG, reg | PCI_COMMAND_MASTER_ENABLE); } if (!pmf_device_register(self, ppb_suspend, ppb_resume)) aprint_error_dev(self, "couldn't establish power handler\n"); /* * Attach the PCI bus that hangs off of it. * * XXX Don't pass-through Memory Read Multiple. Should we? * XXX Consult the spec... */ pba.pba_iot = pa->pa_iot; pba.pba_memt = pa->pa_memt; pba.pba_dmat = pa->pa_dmat; pba.pba_dmat64 = pa->pa_dmat64; pba.pba_pc = pc; pba.pba_flags = pa->pa_flags & ~PCI_FLAGS_MRM_OKAY; pba.pba_bus = PPB_BUSINFO_SECONDARY(busdata); pba.pba_sub = PPB_BUSINFO_SUBORDINATE(busdata); pba.pba_bridgetag = &sc->sc_tag; pba.pba_intrswiz = pa->pa_intrswiz; pba.pba_intrtag = pa->pa_intrtag; config_found_ia(self, "pcibus", &pba, pcibusprint); } static int ppbdetach(device_t self, int flags) { #ifdef PPB_USEINTR struct ppb_softc *sc = device_private(self); pcireg_t slcsr; #endif int rc; if ((rc = config_detach_children(self, flags)) != 0) return rc; #ifdef PPB_USEINTR if (sc->sc_intrhand != NULL) { /* Detach event counters */ evcnt_detach(&sc->sc_ev_intr); evcnt_detach(&sc->sc_ev_abp); evcnt_detach(&sc->sc_ev_pfd); evcnt_detach(&sc->sc_ev_msc); evcnt_detach(&sc->sc_ev_pdc); evcnt_detach(&sc->sc_ev_cc); evcnt_detach(&sc->sc_ev_lacs); /* Clear any pending events and disable interrupt */ slcsr = pci_conf_read(sc->sc_pc, sc->sc_tag, sc->sc_pciecapoff + PCIE_SLCSR); slcsr &= ~PCIE_SLCSR_ENABLE_MASK; pci_conf_write(sc->sc_pc, sc->sc_tag, sc->sc_pciecapoff + PCIE_SLCSR, slcsr); /* Disestablish the interrupt handler */ pci_intr_disestablish(sc->sc_pc, sc->sc_intrhand); pci_intr_release(sc->sc_pc, sc->sc_pihp, 1); } #endif pmf_device_deregister(self); return 0; } static bool ppb_resume(device_t dv, const pmf_qual_t *qual) { struct ppb_softc *sc = device_private(dv); int off; pcireg_t val; for (off = 0x40; off <= 0xff; off += 4) { val = pci_conf_read(sc->sc_pc, sc->sc_tag, off); if (val != sc->sc_pciconfext[(off - 0x40) / 4]) pci_conf_write(sc->sc_pc, sc->sc_tag, off, sc->sc_pciconfext[(off - 0x40)/4]); } return true; } static bool ppb_suspend(device_t dv, const pmf_qual_t *qual) { struct ppb_softc *sc = device_private(dv); int off; for (off = 0x40; off <= 0xff; off += 4) sc->sc_pciconfext[(off - 0x40) / 4] = pci_conf_read(sc->sc_pc, sc->sc_tag, off); return true; } static void ppbchilddet(device_t self, device_t child) { /* we keep no references to child devices, so do nothing */ } #ifdef PPB_USEINTR static int ppb_intr(void *arg) { struct ppb_softc *sc = arg; device_t dev = sc->sc_dev; pcireg_t reg; reg = pci_conf_read(sc->sc_pc, sc->sc_tag, sc->sc_pciecapoff + PCIE_SLCSR); /* * Not me. This check is only required for INTx. * ppb_intr() would be spilted int ppb_intr_legacy() and ppb_intr_msi() */ if ((reg & PCIE_SLCSR_STATCHG_MASK) == 0) return 0; /* Clear interrupts. */ pci_conf_write(sc->sc_pc, sc->sc_tag, sc->sc_pciecapoff + PCIE_SLCSR, reg); sc->sc_ev_intr.ev_count++; /* Attention Button Pressed */ if (reg & PCIE_SLCSR_ABP) { sc->sc_ev_abp.ev_count++; if (ppb_printevent) device_printf(dev, "Attention Button Pressed\n"); } /* Power Fault Detected */ if (reg & PCIE_SLCSR_PFD) { sc->sc_ev_pfd.ev_count++; if (ppb_printevent) device_printf(dev, "Power Fault Detected\n"); } /* MRL Sensor Changed */ if (reg & PCIE_SLCSR_MSC) { sc->sc_ev_msc.ev_count++; if (ppb_printevent) device_printf(dev, "MRL Sensor Changed\n"); } /* Presence Detect Changed */ if (reg & PCIE_SLCSR_PDC) { sc->sc_ev_pdc.ev_count++; if (ppb_printevent) device_printf(dev, "Presence Detect Changed\n"); if (reg & PCIE_SLCSR_PDS) { /* XXX Insert */ } else { /* XXX Remove */ } } /* Command Completed */ if (reg & PCIE_SLCSR_CC) { sc->sc_ev_cc.ev_count++; if (ppb_printevent) device_printf(dev, "Command Completed\n"); } /* Data Link Layer State Changed */ if (reg & PCIE_SLCSR_LACS) { sc->sc_ev_lacs.ev_count++; if (ppb_printevent) device_printf(dev, "Data Link Layer State Changed\n"); } return 1; } #endif /* PPB_USEINTR */