/* $NetBSD: if_xi.c,v 1.80.8.2 2019/11/06 10:04:46 martin Exp $ */ /* OpenBSD: if_xe.c,v 1.9 1999/09/16 11:28:42 niklas Exp */ /* * Copyright (c) 2004 Charles M. Hannum. All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. All advertising materials mentioning features or use of this software * must display the following acknowledgement: * This product includes software developed by Charles M. Hannum. * 4. The name of the author may not be used to endorse or promote products * derived from this software without specific prior written permission. */ /* * Copyright (c) 1999 Niklas Hallqvist, Brandon Creighton, Job de Haas * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. All advertising materials mentioning features or use of this software * must display the following acknowledgement: * This product includes software developed by Niklas Hallqvist, * Brandon Creighton and Job de Haas. * 4. The name of the author may not be used to endorse or promote products * derived from this software without specific prior written permission * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ /* * A driver for Xircom CreditCard PCMCIA Ethernet adapters. */ #include __KERNEL_RCSID(0, "$NetBSD: if_xi.c,v 1.80.8.2 2019/11/06 10:04:46 martin Exp $"); #include "opt_inet.h" #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #ifdef INET #include #include #include #include #include #endif /* * Maximum number of bytes to read per interrupt. Linux recommends * somewhere between 2000-22000. * XXX This is currently a hard maximum. */ #define MAX_BYTES_INTR 12000 #include #include #include #include #include #include #include #ifdef __GNUC__ #define INLINE inline #else #define INLINE #endif /* __GNUC__ */ #define XIDEBUG #define XIDEBUG_VALUE 0 #ifdef XIDEBUG #define DPRINTF(cat, x) if (xidebug & (cat)) printf x #define XID_CONFIG 0x01 #define XID_MII 0x02 #define XID_INTR 0x04 #define XID_FIFO 0x08 #define XID_MCAST 0x10 #ifdef XIDEBUG_VALUE int xidebug = XIDEBUG_VALUE; #else int xidebug = 0; #endif #else #define DPRINTF(cat, x) (void)0 #endif #define STATIC STATIC int xi_enable(struct xi_softc *); STATIC void xi_disable(struct xi_softc *); STATIC void xi_cycle_power(struct xi_softc *); STATIC int xi_ether_ioctl(struct ifnet *, u_long cmd, void *); STATIC void xi_full_reset(struct xi_softc *); STATIC void xi_init(struct xi_softc *); STATIC int xi_ioctl(struct ifnet *, u_long, void *); STATIC int xi_mdi_read(device_t, int, int); STATIC void xi_mdi_write(device_t, int, int, int); STATIC int xi_mediachange(struct ifnet *); STATIC u_int16_t xi_get(struct xi_softc *); STATIC void xi_reset(struct xi_softc *); STATIC void xi_set_address(struct xi_softc *); STATIC void xi_start(struct ifnet *); STATIC void xi_statchg(struct ifnet *); STATIC void xi_stop(struct xi_softc *); STATIC void xi_watchdog(struct ifnet *); void xi_attach(struct xi_softc *sc, u_int8_t *myea) { struct ifnet *ifp = &sc->sc_ethercom.ec_if; #if 0 /* * Configuration as advised by DINGO documentation. * Dingo has some extra configuration registers in the CCR space. */ if (sc->sc_chipset >= XI_CHIPSET_DINGO) { struct pcmcia_mem_handle pcmh; int ccr_window; bus_size_t ccr_offset; /* get access to the DINGO CCR space */ if (pcmcia_mem_alloc(psc->sc_pf, PCMCIA_CCR_SIZE_DINGO, &pcmh)) { DPRINTF(XID_CONFIG, ("xi: bad mem alloc\n")); goto fail; } if (pcmcia_mem_map(psc->sc_pf, PCMCIA_MEM_ATTR, psc->sc_pf->ccr_base, PCMCIA_CCR_SIZE_DINGO, &pcmh, &ccr_offset, &ccr_window)) { DPRINTF(XID_CONFIG, ("xi: bad mem map\n")); pcmcia_mem_free(psc->sc_pf, &pcmh); goto fail; } /* enable the second function - usually modem */ bus_space_write_1(pcmh.memt, pcmh.memh, ccr_offset + PCMCIA_CCR_DCOR0, PCMCIA_CCR_DCOR0_SFINT); bus_space_write_1(pcmh.memt, pcmh.memh, ccr_offset + PCMCIA_CCR_DCOR1, PCMCIA_CCR_DCOR1_FORCE_LEVIREQ | PCMCIA_CCR_DCOR1_D6); bus_space_write_1(pcmh.memt, pcmh.memh, ccr_offset + PCMCIA_CCR_DCOR2, 0); bus_space_write_1(pcmh.memt, pcmh.memh, ccr_offset + PCMCIA_CCR_DCOR3, 0); bus_space_write_1(pcmh.memt, pcmh.memh, ccr_offset + PCMCIA_CCR_DCOR4, 0); /* We don't need them anymore and can free them (I think). */ pcmcia_mem_unmap(psc->sc_pf, ccr_window); pcmcia_mem_free(psc->sc_pf, &pcmh); } #endif /* Reset and initialize the card. */ xi_full_reset(sc); printf("%s: MAC address %s\n", device_xname(sc->sc_dev), ether_sprintf(myea)); ifp = &sc->sc_ethercom.ec_if; /* Initialize the ifnet structure. */ strlcpy(ifp->if_xname, device_xname(sc->sc_dev), IFNAMSIZ); ifp->if_softc = sc; ifp->if_start = xi_start; ifp->if_ioctl = xi_ioctl; ifp->if_watchdog = xi_watchdog; ifp->if_flags = IFF_BROADCAST | IFF_NOTRAILERS | IFF_SIMPLEX | IFF_MULTICAST; IFQ_SET_READY(&ifp->if_snd); /* 802.1q capability */ sc->sc_ethercom.ec_capabilities |= ETHERCAP_VLAN_MTU; /* Attach the interface. */ if_attach(ifp); if_deferred_start_init(ifp, NULL); ether_ifattach(ifp, myea); /* * Initialize our media structures and probe the MII. */ sc->sc_mii.mii_ifp = ifp; sc->sc_mii.mii_readreg = xi_mdi_read; sc->sc_mii.mii_writereg = xi_mdi_write; sc->sc_mii.mii_statchg = xi_statchg; sc->sc_ethercom.ec_mii = &sc->sc_mii; ifmedia_init(&sc->sc_mii.mii_media, 0, xi_mediachange, ether_mediastatus); DPRINTF(XID_MII | XID_CONFIG, ("xi: bmsr %x\n", xi_mdi_read(sc->sc_dev, 0, 1))); mii_attach(sc->sc_dev, &sc->sc_mii, 0xffffffff, MII_PHY_ANY, MII_OFFSET_ANY, 0); if (LIST_FIRST(&sc->sc_mii.mii_phys) == NULL) ifmedia_add(&sc->sc_mii.mii_media, IFM_ETHER | IFM_AUTO, 0, NULL); ifmedia_set(&sc->sc_mii.mii_media, IFM_ETHER | IFM_AUTO); rnd_attach_source(&sc->sc_rnd_source, device_xname(sc->sc_dev), RND_TYPE_NET, RND_FLAG_DEFAULT); } int xi_detach(device_t self, int flags) { struct xi_softc *sc = device_private(self); struct ifnet *ifp = &sc->sc_ethercom.ec_if; DPRINTF(XID_CONFIG, ("xi_detach()\n")); xi_disable(sc); rnd_detach_source(&sc->sc_rnd_source); mii_detach(&sc->sc_mii, MII_PHY_ANY, MII_OFFSET_ANY); ifmedia_delete_instance(&sc->sc_mii.mii_media, IFM_INST_ANY); ether_ifdetach(ifp); if_detach(ifp); return 0; } int xi_intr(void *arg) { struct xi_softc *sc = arg; struct ifnet *ifp = &sc->sc_ethercom.ec_if; u_int8_t esr, rsr, isr, rx_status; u_int16_t tx_status, recvcount = 0, tempint; DPRINTF(XID_CONFIG, ("xi_intr()\n")); if (sc->sc_enabled == 0 || !device_is_active(sc->sc_dev)) return (0); ifp->if_timer = 0; /* turn watchdog timer off */ PAGE(sc, 0); if (sc->sc_chipset >= XI_CHIPSET_MOHAWK) { /* Disable interrupt (Linux does it). */ bus_space_write_1(sc->sc_bst, sc->sc_bsh, CR, 0); } esr = bus_space_read_1(sc->sc_bst, sc->sc_bsh, ESR); isr = bus_space_read_1(sc->sc_bst, sc->sc_bsh, ISR0); rsr = bus_space_read_1(sc->sc_bst, sc->sc_bsh, RSR); /* Check to see if card has been ejected. */ if (isr == 0xff) { #ifdef DIAGNOSTIC printf("%s: interrupt for dead card\n", device_xname(sc->sc_dev)); #endif goto end; } DPRINTF(XID_INTR, ("xi: isr=%02x\n", isr)); PAGE(sc, 0x40); rx_status = bus_space_read_1(sc->sc_bst, sc->sc_bsh, RXST0); bus_space_write_1(sc->sc_bst, sc->sc_bsh, RXST0, ~rx_status & 0xff); tx_status = bus_space_read_1(sc->sc_bst, sc->sc_bsh, TXST0); tx_status |= bus_space_read_1(sc->sc_bst, sc->sc_bsh, TXST1) << 8; bus_space_write_1(sc->sc_bst, sc->sc_bsh, TXST0, 0); bus_space_write_1(sc->sc_bst, sc->sc_bsh, TXST1, 0); DPRINTF(XID_INTR, ("xi: rx_status=%02x tx_status=%04x\n", rx_status, tx_status)); PAGE(sc, 0); while (esr & FULL_PKT_RCV) { if (!(rsr & RSR_RX_OK)) break; /* Compare bytes read this interrupt to hard maximum. */ if (recvcount > MAX_BYTES_INTR) { DPRINTF(XID_INTR, ("xi: too many bytes this interrupt\n")); ifp->if_iqdrops++; /* Drop packet. */ bus_space_write_2(sc->sc_bst, sc->sc_bsh, DO0, DO_SKIP_RX_PKT); } tempint = xi_get(sc); /* XXX doesn't check the error! */ recvcount += tempint; esr = bus_space_read_1(sc->sc_bst, sc->sc_bsh, ESR); rsr = bus_space_read_1(sc->sc_bst, sc->sc_bsh, RSR); } /* Packet too long? */ if (rsr & RSR_TOO_LONG) { ifp->if_ierrors++; DPRINTF(XID_INTR, ("xi: packet too long\n")); } /* CRC error? */ if (rsr & RSR_CRCERR) { ifp->if_ierrors++; DPRINTF(XID_INTR, ("xi: CRC error detected\n")); } /* Alignment error? */ if (rsr & RSR_ALIGNERR) { ifp->if_ierrors++; DPRINTF(XID_INTR, ("xi: alignment error detected\n")); } /* Check for rx overrun. */ if (rx_status & RX_OVERRUN) { ifp->if_ierrors++; bus_space_write_1(sc->sc_bst, sc->sc_bsh, CR, CLR_RX_OVERRUN); DPRINTF(XID_INTR, ("xi: overrun cleared\n")); } /* Try to start more packets transmitting. */ if_schedule_deferred_start(ifp); /* Detected excessive collisions? */ if ((tx_status & EXCESSIVE_COLL) && ifp->if_opackets > 0) { DPRINTF(XID_INTR, ("xi: excessive collisions\n")); bus_space_write_1(sc->sc_bst, sc->sc_bsh, CR, RESTART_TX); ifp->if_oerrors++; } if ((tx_status & TX_ABORT) && ifp->if_opackets > 0) ifp->if_oerrors++; /* have handled the interrupt */ rnd_add_uint32(&sc->sc_rnd_source, tx_status); end: /* Reenable interrupts. */ PAGE(sc, 0); bus_space_write_1(sc->sc_bst, sc->sc_bsh, CR, ENABLE_INT); return (1); } /* * Pull a packet from the card into an mbuf chain. */ STATIC u_int16_t xi_get(struct xi_softc *sc) { struct ifnet *ifp = &sc->sc_ethercom.ec_if; struct mbuf *top, **mp, *m; u_int16_t pktlen, len, recvcount = 0; u_int8_t *data; DPRINTF(XID_CONFIG, ("xi_get()\n")); PAGE(sc, 0); pktlen = bus_space_read_2(sc->sc_bst, sc->sc_bsh, RBC0) & RBC_COUNT_MASK; DPRINTF(XID_CONFIG, ("xi_get: pktlen=%d\n", pktlen)); if (pktlen == 0) { /* * XXX At least one CE2 sets RBC0 == 0 occasionally, and only * when MPE is set. It is not known why. */ return (0); } /* XXX should this be incremented now ? */ recvcount += pktlen; MGETHDR(m, M_DONTWAIT, MT_DATA); if (m == NULL) return (recvcount); m_set_rcvif(m, ifp); m->m_pkthdr.len = pktlen; len = MHLEN; top = NULL; mp = ⊤ while (pktlen > 0) { if (top) { MGET(m, M_DONTWAIT, MT_DATA); if (m == NULL) { m_freem(top); return (recvcount); } len = MLEN; } if (pktlen >= MINCLSIZE) { MCLGET(m, M_DONTWAIT); if (!(m->m_flags & M_EXT)) { m_freem(m); m_freem(top); return (recvcount); } len = MCLBYTES; } if (top == NULL) { char *newdata = (char *)ALIGN(m->m_data + sizeof(struct ether_header)) - sizeof(struct ether_header); len -= newdata - m->m_data; m->m_data = newdata; } len = min(pktlen, len); data = mtod(m, u_int8_t *); if (len > 1) { len &= ~1; bus_space_read_multi_2(sc->sc_bst, sc->sc_bsh, EDP, (u_int16_t *)data, len>>1); } else *data = bus_space_read_1(sc->sc_bst, sc->sc_bsh, EDP); m->m_len = len; pktlen -= len; *mp = m; mp = &m->m_next; } /* Skip Rx packet. */ bus_space_write_2(sc->sc_bst, sc->sc_bsh, DO0, DO_SKIP_RX_PKT); if (top == NULL) return recvcount; /* Trim the CRC off the end of the packet. */ m_adj(top, -ETHER_CRC_LEN); if_percpuq_enqueue(ifp->if_percpuq, top); return (recvcount); } /* * Serial management for the MII. * The DELAY's below stem from the fact that the maximum frequency * acceptable on the MDC pin is 2.5 MHz and fast processors can easily * go much faster than that. */ /* Let the MII serial management be idle for one period. */ static INLINE void xi_mdi_idle(struct xi_softc *); static INLINE void xi_mdi_idle(struct xi_softc *sc) { bus_space_tag_t bst = sc->sc_bst; bus_space_handle_t bsh = sc->sc_bsh; /* Drive MDC low... */ bus_space_write_1(bst, bsh, GP2, MDC_LOW); DELAY(1); /* and high again. */ bus_space_write_1(bst, bsh, GP2, MDC_HIGH); DELAY(1); } /* Pulse out one bit of data. */ static INLINE void xi_mdi_pulse(struct xi_softc *, int); static INLINE void xi_mdi_pulse(struct xi_softc *sc, int data) { bus_space_tag_t bst = sc->sc_bst; bus_space_handle_t bsh = sc->sc_bsh; u_int8_t bit = data ? MDIO_HIGH : MDIO_LOW; /* First latch the data bit MDIO with clock bit MDC low...*/ bus_space_write_1(bst, bsh, GP2, bit | MDC_LOW); DELAY(1); /* then raise the clock again, preserving the data bit. */ bus_space_write_1(bst, bsh, GP2, bit | MDC_HIGH); DELAY(1); } /* Probe one bit of data. */ static INLINE int xi_mdi_probe(struct xi_softc *sc); static INLINE int xi_mdi_probe(struct xi_softc *sc) { bus_space_tag_t bst = sc->sc_bst; bus_space_handle_t bsh = sc->sc_bsh; u_int8_t x; /* Pull clock bit MDCK low... */ bus_space_write_1(bst, bsh, GP2, MDC_LOW); DELAY(1); /* Read data and drive clock high again. */ x = bus_space_read_1(bst, bsh, GP2); bus_space_write_1(bst, bsh, GP2, MDC_HIGH); DELAY(1); return (x & MDIO); } /* Pulse out a sequence of data bits. */ static INLINE void xi_mdi_pulse_bits(struct xi_softc *, u_int32_t, int); static INLINE void xi_mdi_pulse_bits(struct xi_softc *sc, u_int32_t data, int len) { u_int32_t mask; for (mask = 1 << (len - 1); mask; mask >>= 1) xi_mdi_pulse(sc, data & mask); } /* Read a PHY register. */ STATIC int xi_mdi_read(device_t self, int phy, int reg) { struct xi_softc *sc = device_private(self); int i; u_int32_t mask; u_int32_t data = 0; PAGE(sc, 2); for (i = 0; i < 32; i++) /* Synchronize. */ xi_mdi_pulse(sc, 1); xi_mdi_pulse_bits(sc, 0x06, 4); /* Start + Read opcode */ xi_mdi_pulse_bits(sc, phy, 5); /* PHY address */ xi_mdi_pulse_bits(sc, reg, 5); /* PHY register */ xi_mdi_idle(sc); /* Turn around. */ xi_mdi_probe(sc); /* Drop initial zero bit. */ for (mask = 1 << 15; mask; mask >>= 1) { if (xi_mdi_probe(sc)) data |= mask; } xi_mdi_idle(sc); DPRINTF(XID_MII, ("xi_mdi_read: phy %d reg %d -> %x\n", phy, reg, data)); return (data); } /* Write a PHY register. */ STATIC void xi_mdi_write(device_t self, int phy, int reg, int value) { struct xi_softc *sc = device_private(self); int i; PAGE(sc, 2); for (i = 0; i < 32; i++) /* Synchronize. */ xi_mdi_pulse(sc, 1); xi_mdi_pulse_bits(sc, 0x05, 4); /* Start + Write opcode */ xi_mdi_pulse_bits(sc, phy, 5); /* PHY address */ xi_mdi_pulse_bits(sc, reg, 5); /* PHY register */ xi_mdi_pulse_bits(sc, 0x02, 2); /* Turn around. */ xi_mdi_pulse_bits(sc, value, 16); /* Write the data */ xi_mdi_idle(sc); /* Idle away. */ DPRINTF(XID_MII, ("xi_mdi_write: phy %d reg %d val %x\n", phy, reg, value)); } STATIC void xi_statchg(struct ifnet *ifp) { /* XXX Update ifp->if_baudrate */ } /* * Change media according to request. */ STATIC int xi_mediachange(struct ifnet *ifp) { int s; DPRINTF(XID_CONFIG, ("xi_mediachange()\n")); if (ifp->if_flags & IFF_UP) { s = splnet(); xi_init(ifp->if_softc); splx(s); } return (0); } STATIC void xi_reset(struct xi_softc *sc) { int s; DPRINTF(XID_CONFIG, ("xi_reset()\n")); s = splnet(); xi_stop(sc); xi_init(sc); splx(s); } STATIC void xi_watchdog(struct ifnet *ifp) { struct xi_softc *sc = ifp->if_softc; printf("%s: device timeout\n", device_xname(sc->sc_dev)); ++ifp->if_oerrors; xi_reset(sc); } STATIC void xi_stop(register struct xi_softc *sc) { bus_space_tag_t bst = sc->sc_bst; bus_space_handle_t bsh = sc->sc_bsh; DPRINTF(XID_CONFIG, ("xi_stop()\n")); PAGE(sc, 0x40); bus_space_write_1(bst, bsh, CMD0, DISABLE_RX); /* Disable interrupts. */ PAGE(sc, 0); bus_space_write_1(bst, bsh, CR, 0); PAGE(sc, 1); bus_space_write_1(bst, bsh, IMR0, 0); /* Cancel watchdog timer. */ sc->sc_ethercom.ec_if.if_timer = 0; } STATIC int xi_enable(struct xi_softc *sc) { int error; if (!sc->sc_enabled) { error = (*sc->sc_enable)(sc); if (error) return (error); sc->sc_enabled = 1; xi_full_reset(sc); } return (0); } STATIC void xi_disable(struct xi_softc *sc) { if (sc->sc_enabled) { sc->sc_enabled = 0; (*sc->sc_disable)(sc); } } STATIC void xi_init(struct xi_softc *sc) { struct ifnet *ifp = &sc->sc_ethercom.ec_if; bus_space_tag_t bst = sc->sc_bst; bus_space_handle_t bsh = sc->sc_bsh; DPRINTF(XID_CONFIG, ("xi_init()\n")); /* Setup the ethernet interrupt mask. */ PAGE(sc, 1); bus_space_write_1(bst, bsh, IMR0, ISR_TX_OFLOW | ISR_PKT_TX | ISR_MAC_INT | /* ISR_RX_EARLY | */ ISR_RX_FULL | ISR_RX_PKT_REJ | ISR_FORCED_INT); if (sc->sc_chipset < XI_CHIPSET_DINGO) { /* XXX What is this? Not for Dingo at least. */ /* Unmask TX underrun detection */ bus_space_write_1(bst, bsh, IMR1, 1); } /* Enable interrupts. */ PAGE(sc, 0); bus_space_write_1(bst, bsh, CR, ENABLE_INT); xi_set_address(sc); PAGE(sc, 0x40); bus_space_write_1(bst, bsh, CMD0, ENABLE_RX | ONLINE); PAGE(sc, 0); /* Set current media. */ mii_mediachg(&sc->sc_mii); ifp->if_flags |= IFF_RUNNING; ifp->if_flags &= ~IFF_OACTIVE; xi_start(ifp); } /* * Start outputting on the interface. * Always called as splnet(). */ STATIC void xi_start(struct ifnet *ifp) { struct xi_softc *sc = ifp->if_softc; bus_space_tag_t bst = sc->sc_bst; bus_space_handle_t bsh = sc->sc_bsh; unsigned int s, len, pad = 0; struct mbuf *m0, *m; u_int16_t space; DPRINTF(XID_CONFIG, ("xi_start()\n")); /* Don't transmit if interface is busy or not running. */ if ((ifp->if_flags & (IFF_RUNNING | IFF_OACTIVE)) != IFF_RUNNING) { DPRINTF(XID_CONFIG, ("xi: interface busy or not running\n")); return; } /* Peek at the next packet. */ IFQ_POLL(&ifp->if_snd, m0); if (m0 == 0) return; /* We need to use m->m_pkthdr.len, so require the header. */ if (!(m0->m_flags & M_PKTHDR)) panic("xi_start: no header mbuf"); len = m0->m_pkthdr.len; #if 1 /* Pad to ETHER_MIN_LEN - ETHER_CRC_LEN. */ if (len < ETHER_MIN_LEN - ETHER_CRC_LEN) pad = ETHER_MIN_LEN - ETHER_CRC_LEN - len; #else pad = 0; #endif PAGE(sc, 0); bus_space_write_2(bst, bsh, TRS, (u_int16_t)len + pad + 2); space = bus_space_read_2(bst, bsh, TSO) & 0x7fff; if (len + pad + 2 > space) { DPRINTF(XID_FIFO, ("xi: not enough space in output FIFO (%d > %d)\n", len + pad + 2, space)); return; } IFQ_DEQUEUE(&ifp->if_snd, m0); bpf_mtap(ifp, m0); /* * Do the output at splhigh() so that an interrupt from another device * won't cause a FIFO underrun. */ s = splhigh(); bus_space_write_2(bst, bsh, EDP, (u_int16_t)len + pad); for (m = m0; m; ) { if (m->m_len > 1) bus_space_write_multi_2(bst, bsh, EDP, mtod(m, u_int16_t *), m->m_len>>1); if (m->m_len & 1) { DPRINTF(XID_CONFIG, ("xi: XXX odd!\n")); bus_space_write_1(bst, bsh, EDP, *(mtod(m, u_int8_t *) + m->m_len - 1)); } m = m0 = m_free(m); } DPRINTF(XID_CONFIG, ("xi: len=%d pad=%d total=%d\n", len, pad, len+pad+4)); if (sc->sc_chipset >= XI_CHIPSET_MOHAWK) bus_space_write_1(bst, bsh, CR, TX_PKT | ENABLE_INT); else { for (; pad > 1; pad -= 2) bus_space_write_2(bst, bsh, EDP, 0); if (pad == 1) bus_space_write_1(bst, bsh, EDP, 0); } splx(s); ifp->if_timer = 5; ++ifp->if_opackets; } STATIC int xi_ether_ioctl(struct ifnet *ifp, u_long cmd, void *data) { struct ifaddr *ifa = (struct ifaddr *)data; struct xi_softc *sc = ifp->if_softc; int error; DPRINTF(XID_CONFIG, ("xi_ether_ioctl()\n")); switch (cmd) { case SIOCINITIFADDR: if ((error = xi_enable(sc)) != 0) break; ifp->if_flags |= IFF_UP; xi_init(sc); switch (ifa->ifa_addr->sa_family) { #ifdef INET case AF_INET: arp_ifinit(ifp, ifa); break; #endif /* INET */ default: break; } break; default: return (EINVAL); } return (0); } STATIC int xi_ioctl(struct ifnet *ifp, u_long cmd, void *data) { struct xi_softc *sc = ifp->if_softc; int s, error = 0; DPRINTF(XID_CONFIG, ("xi_ioctl()\n")); s = splnet(); switch (cmd) { case SIOCINITIFADDR: error = xi_ether_ioctl(ifp, cmd, data); break; case SIOCSIFFLAGS: if ((error = ifioctl_common(ifp, cmd, data)) != 0) break; /* XXX re-use ether_ioctl() */ switch (ifp->if_flags & (IFF_UP|IFF_RUNNING)) { case IFF_RUNNING: /* * If interface is marked down and it is running, * stop it. */ xi_stop(sc); ifp->if_flags &= ~IFF_RUNNING; xi_disable(sc); break; case IFF_UP: /* * If interface is marked up and it is stopped, * start it. */ if ((error = xi_enable(sc)) != 0) break; xi_init(sc); break; case IFF_UP|IFF_RUNNING: /* * Reset the interface to pick up changes in any * other flags that affect hardware registers. */ xi_set_address(sc); break; case 0: break; } break; case SIOCADDMULTI: case SIOCDELMULTI: if (sc->sc_enabled == 0) { error = EIO; break; } /*FALLTHROUGH*/ case SIOCSIFMEDIA: case SIOCGIFMEDIA: if ((error = ether_ioctl(ifp, cmd, data)) == ENETRESET) { /* * Multicast list has changed; set the hardware * filter accordingly. */ if (ifp->if_flags & IFF_RUNNING) xi_set_address(sc); error = 0; } break; default: error = ether_ioctl(ifp, cmd, data); break; } splx(s); return (error); } STATIC void xi_set_address(struct xi_softc *sc) { bus_space_tag_t bst = sc->sc_bst; bus_space_handle_t bsh = sc->sc_bsh; struct ethercom *ether = &sc->sc_ethercom; struct ifnet *ifp = &sc->sc_ethercom.ec_if; struct ether_multistep step; struct ether_multi *enm; int page, num; int i; u_int8_t x; const u_int8_t *enaddr; u_int8_t indaddr[64]; DPRINTF(XID_CONFIG, ("xi_set_address()\n")); enaddr = (const u_int8_t *)CLLADDR(ifp->if_sadl); if (sc->sc_chipset >= XI_CHIPSET_MOHAWK) for (i = 0; i < 6; i++) indaddr[i] = enaddr[5 - i]; else for (i = 0; i < 6; i++) indaddr[i] = enaddr[i]; num = 1; if (ether->ec_multicnt > 9) { ifp->if_flags |= IFF_ALLMULTI; goto done; } ETHER_FIRST_MULTI(step, ether, enm); for (; enm; num++) { if (memcmp(enm->enm_addrlo, enm->enm_addrhi, sizeof(enm->enm_addrlo)) != 0) { /* * The multicast address is really a range; * it's easier just to accept all multicasts. * XXX should we be setting IFF_ALLMULTI here? */ ifp->if_flags |= IFF_ALLMULTI; goto done; } if (sc->sc_chipset >= XI_CHIPSET_MOHAWK) for (i = 0; i < 6; i++) indaddr[num * 6 + i] = enm->enm_addrlo[5 - i]; else for (i = 0; i < 6; i++) indaddr[num * 6 + i] = enm->enm_addrlo[i]; ETHER_NEXT_MULTI(step, enm); } ifp->if_flags &= ~IFF_ALLMULTI; done: if (num < 10) memset(&indaddr[num * 6], 0xff, 6 * (10 - num)); for (page = 0; page < 8; page++) { #ifdef XIDEBUG if (xidebug & XID_MCAST) { printf("page %d before:", page); for (i = 0; i < 8; i++) printf(" %02x", indaddr[page * 8 + i]); printf("\n"); } #endif PAGE(sc, 0x50 + page); bus_space_write_region_1(bst, bsh, IA, &indaddr[page * 8], page == 7 ? 4 : 8); /* * XXX * Without this delay, the address registers on my CE2 get * trashed the first and I have to cycle it. I have no idea * why. - mycroft, 2004/08/09 */ DELAY(50); #ifdef XIDEBUG if (xidebug & XID_MCAST) { bus_space_read_region_1(bst, bsh, IA, &indaddr[page * 8], page == 7 ? 4 : 8); printf("page %d after: ", page); for (i = 0; i < 8; i++) printf(" %02x", indaddr[page * 8 + i]); printf("\n"); } #endif } PAGE(sc, 0x42); x = SWC1_IND_ADDR; if (ifp->if_flags & IFF_PROMISC) x |= SWC1_PROMISC; if (ifp->if_flags & (IFF_ALLMULTI|IFF_PROMISC)) x |= SWC1_MCAST_PROM; if (!LIST_FIRST(&sc->sc_mii.mii_phys)) x |= SWC1_AUTO_MEDIA; bus_space_write_1(sc->sc_bst, sc->sc_bsh, SWC1, x); } STATIC void xi_cycle_power(struct xi_softc *sc) { bus_space_tag_t bst = sc->sc_bst; bus_space_handle_t bsh = sc->sc_bsh; DPRINTF(XID_CONFIG, ("xi_cycle_power()\n")); PAGE(sc, 4); DELAY(1); bus_space_write_1(bst, bsh, GP1, 0); tsleep(&xi_cycle_power, PWAIT, "xipwr1", hz * 40 / 1000); if (sc->sc_chipset >= XI_CHIPSET_MOHAWK) bus_space_write_1(bst, bsh, GP1, POWER_UP); else /* XXX What is bit 2 (aka AIC)? */ bus_space_write_1(bst, bsh, GP1, POWER_UP | 4); tsleep(&xi_cycle_power, PWAIT, "xipwr2", hz * 20 / 1000); } STATIC void xi_full_reset(struct xi_softc *sc) { bus_space_tag_t bst = sc->sc_bst; bus_space_handle_t bsh = sc->sc_bsh; u_int8_t x; DPRINTF(XID_CONFIG, ("xi_full_reset()\n")); /* Do an as extensive reset as possible on all functions. */ xi_cycle_power(sc); bus_space_write_1(bst, bsh, CR, SOFT_RESET); tsleep(&xi_full_reset, PWAIT, "xirst1", hz * 20 / 1000); bus_space_write_1(bst, bsh, CR, 0); tsleep(&xi_full_reset, PWAIT, "xirst2", hz * 20 / 1000); PAGE(sc, 4); if (sc->sc_chipset >= XI_CHIPSET_MOHAWK) { /* * Drive GP1 low to power up ML6692 and GP2 high to power up * the 10MHz chip. XXX What chip is that? The phy? */ bus_space_write_1(bst, bsh, GP0, GP1_OUT | GP2_OUT | GP2_WR); } tsleep(&xi_full_reset, PWAIT, "xirst3", hz * 500 / 1000); /* Get revision information. XXX Symbolic constants. */ sc->sc_rev = bus_space_read_1(bst, bsh, BV) & ((sc->sc_chipset >= XI_CHIPSET_MOHAWK) ? 0x70 : 0x30) >> 4; DPRINTF(XID_CONFIG, ("xi: rev=%02x\n", sc->sc_rev)); /* Media selection. XXX Maybe manual overriding too? */ if (sc->sc_chipset < XI_CHIPSET_MOHAWK) { /* * XXX I have no idea what this really does, it is from the * Linux driver. */ bus_space_write_1(bst, bsh, GP0, GP1_OUT); } tsleep(&xi_full_reset, PWAIT, "xirst4", hz * 40 / 1000); /* * Disable source insertion. * XXX Dingo does not have this bit, but Linux does it unconditionally. */ if (sc->sc_chipset < XI_CHIPSET_DINGO) { PAGE(sc, 0x42); bus_space_write_1(bst, bsh, SWC0, 0x20); } /* Set the local memory dividing line. */ if (sc->sc_rev != 1) { PAGE(sc, 2); /* XXX Symbolic constant preferrable. */ bus_space_write_2(bst, bsh, RBS0, 0x2000); } /* * Apparently the receive byte pointer can be bad after a reset, so * we hardwire it correctly. */ PAGE(sc, 0); bus_space_write_2(bst, bsh, DO0, DO_CHG_OFFSET); /* Setup ethernet MAC registers. XXX Symbolic constants. */ PAGE(sc, 0x40); bus_space_write_1(bst, bsh, RX0MSK, PKT_TOO_LONG | CRC_ERR | RX_OVERRUN | RX_ABORT | RX_OK); bus_space_write_1(bst, bsh, TX0MSK, CARRIER_LOST | EXCESSIVE_COLL | TX_UNDERRUN | LATE_COLLISION | SQE | TX_ABORT | TX_OK); if (sc->sc_chipset < XI_CHIPSET_DINGO) /* XXX From Linux, dunno what 0xb0 means. */ bus_space_write_1(bst, bsh, TX1MSK, 0xb0); bus_space_write_1(bst, bsh, RXST0, 0); bus_space_write_1(bst, bsh, TXST0, 0); bus_space_write_1(bst, bsh, TXST1, 0); PAGE(sc, 2); /* Enable MII function if available. */ x = 0; if (LIST_FIRST(&sc->sc_mii.mii_phys)) x |= SELECT_MII; bus_space_write_1(bst, bsh, MSR, x); tsleep(&xi_full_reset, PWAIT, "xirst5", hz * 20 / 1000); /* Configure the LED registers. */ /* XXX This is not good for 10base2. */ bus_space_write_1(bst, bsh, LED, (LED_TX_ACT << LED1_SHIFT) | (LED_10MB_LINK << LED0_SHIFT)); if (sc->sc_chipset >= XI_CHIPSET_DINGO) bus_space_write_1(bst, bsh, LED3, LED_100MB_LINK << LED3_SHIFT); /* * The Linux driver says this: * We should switch back to page 0 to avoid a bug in revision 0 * where regs with offset below 8 can't be read after an access * to the MAC registers. */ PAGE(sc, 0); }