/* $NetBSD: if_xireg.h,v 1.8 2005/12/11 12:23:23 christos Exp $ */ /* OpenBSD: if_xereg.h,v 1.1 1999/05/18 19:18:21 niklas Exp */ /* * Copyright (c) 1999 Niklas Hallqvist, Brandon Creighton, Job de Haas * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. All advertising materials mentioning features or use of this software * must display the following acknowledgement: * This product includes software developed by Niklas Hallqvist, * Brandon Creighton and Job de Haas. * 4. The name of the author may not be used to endorse or promote products * derived from this software without specific prior written permission * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ #define PCMCIA_CCR_ECOR /* Additional Card Configuration Registers (CCR) on Dingo */ #define PCMCIA_CCR_DCOR0 0x20 #define PCMCIA_CCR_DCOR0_MRST_SFRST 0x80 #define PCMCIA_CCR_DCOR0_MRST_SFPWDN 0x40 #define PCMCIA_CCR_DCOR0_LED3_SFRST 0x20 #define PCMCIA_CCR_DCOR0_LED3_SFPWDN 0x10 #define PCMCIA_CCR_DCOR0_BUS 0x08 #define PCMCIA_CCR_DCOR0_DECODE 0x04 #define PCMCIA_CCR_DCOR0_SFINT 0x01 #define PCMCIA_CCR_DCOR1 0x22 #define PCMCIA_CCR_DCOR1_SFCSR_WAIT 0xC0 #define PCMCIA_CCR_DCOR1_SHADOW_SFIOB 0x20 #define PCMCIA_CCR_DCOR1_SHADOW_SFCSR 0x10 #define PCMCIA_CCR_DCOR1_FORCE_LEVIREQ 0x08 #define PCMCIA_CCR_DCOR1_D6 0x04 #define PCMCIA_CCR_DCOR1_SF_STSCHG 0x02 #define PCMCIA_CCR_DCOR1_SF_IREQ 0x01 #define PCMCIA_CCR_DCOR2 0x24 #define PCMCIA_CCR_DCOR2_SHADOW_SFCOR 0x10 #define PCMCIA_CCR_DCOR2_SMEM_BASE 0x0F #define PCMCIA_CCR_DCOR3 0x26 #define PCMCIA_CCR_DCOR4 0x28 #define PCMCIA_CCR_SFCOR 0x40 #define PCMCIA_CCR_SFCOR_SRESET 0x80 #define PCMCIA_CCR_SFCOR_LEVIREQ 0x40 #define PCMCIA_CCR_SFCOR_IRQ_STSCHG 0x20 #define PCMCIA_CCR_SFCOR_CFINDEX 0x18 #define PCMCIA_CCR_SFCOR_IREQ_ENABLE 0x04 #define PCMCIA_CCR_SFCOR_ADDR_DECODE 0x02 #define PCMCIA_CCR_SFCOR_FUNC_ENABLE 0x01 #define PCMCIA_CCR_SFCSR 0x42 #define PCMCIA_CCR_SFCSR_IOIS8 0x20 #define PCMCIA_CCR_SFCSR_AUDIO 0x08 #define PCMCIA_CCR_SFCSR_PWRDWN 0x04 #define PCMCIA_CCR_SFCSR_INTR 0x02 #define PCMCIA_CCR_SFCSR_INTRACK 0x01 #define PCMCIA_CCR_SFIOBASE0 0x4A #define PCMCIA_CCR_SFIOBASE1 0x4C #define PCMCIA_CCR_SFILR 0x52 #define PCMCIA_CCR_SIZE_DINGO 0x54 #define XI_IOSIZE 16 /* All pages */ #define CR 0x0 /* W - Command register */ #define ESR 0x0 /* R - Ethernet status register */ #define PR 0x1 /* RW - Page register select */ #define EDP 0x4 /* RW - Ethernet data port, 4 registers */ #define ISR0 0x6 /* R - Ethernet interrupt status register */ #define GIR 0x7 /* RW - Global interrupt register - dingo only */ #define PTR 0xd /* R - Packets Transmitted register */ /* Page 0 */ #define TSO 0x8 /* R - Transmit space open, 3 registers */ #define TRS 0xa /* W - Transmit reservation size */ #define DO0 0xc /* W - Data offset, 2 registers */ #define DO1 0xd #define RSR 0xc /* R - Rx status register */ #define TPR 0xd /* R - Tx packets register */ #define RBC0 0xe /* R - Rx byte count, 2 registers */ #define RBC1 0xf /* Page 1 */ #define IMR0 0xc /* RW - Interrupt mask, 2 registers */ #define IMR1 0xd #define ECR 0xe /* RW - Ethernet config register */ /* Page 2 */ #define RBS0 0x8 /* RW - Receive buffer start, 2 registers */ #define RBS1 0x9 #define LED 0xa /* RW - LED control register */ #define LED3 0xb /* RW - LED3 control register */ #define MSR 0xc /* RW - Misc. setup register */ #define GP2 0xd /* RW - General purpose register 2 */ /* Page 3 */ #define TPT0 0xa /* RW - Tx packet threshold, 2 registers */ #define TPT1 0xb /* Page 4 */ #define GP0 0x8 /* RW - General purpose register 0 */ #define GP1 0x9 /* RW - General purpose register 1 */ #define BV 0xa /* R - Bonding version register */ #define EES 0xb /* RW - EEPROM control register */ /* Page 5 */ #define RHSA0 0xa /* RX host start address */ /* Page 6 */ /* Page 7 */ /* Page 8 */ /* Page 16 */ /* Page 0x40 */ #define CMD0 0x8 /* W - Receive status register */ #define RXST0 0x9 /* RW - Receive status register */ #define TXST0 0xb /* RW - Transmit status, 2 registers */ #define TXST1 0xc #define RX0MSK 0xd /* RW - Receive status mask register */ #define TX0MSK 0xe /* RW - Transmit status mask, 2 registers */ #define TX1MSK 0xf /* RW - Dingo does not define this register */ /* Page 0x42 */ #define SWC0 0x8 /* RW - Software configuration, 2 registers */ #define SWC1 0x9 /* Page 0x50-0x57 */ #define IA 0x8 /* RW - Individual address */ /* CR register bits */ #define TX_PKT 0x01 /* Transmit packet. */ #define SOFT_RESET 0x02 /* Software reset. */ #define ENABLE_INT 0x04 /* Enable interrupt. */ #define FORCE_INT 0x08 /* Force interrupt. */ #define CLR_TX_FIFO 0x10 /* Clear transmit FIFO. */ #define CLR_RX_OVERRUN 0x20 /* Clear receive overrun. */ #define RESTART_TX 0x40 /* Restart transmit process. */ /* ESR register bits */ #define FULL_PKT_RCV 0x01 /* Full packet received. */ #define PKT_REJECTED 0x04 /* A packet was rejected. */ #define TX_PKT_PEND 0x08 /* TX Packet Pending. */ #define INCOR_POLARITY 0x10 /* XXX from linux driver, but not used there */ #define MEDIA_SELECT 0x20 /* set if TP, clear if AUI */ /* DO register bits */ #define DO_OFF_MASK 0x1fff /* Mask for offset value. */ #define DO_CHG_OFFSET 0x2000 /* Change offset command. */ #define DO_SHM_MODE 0x4000 /* Shared memory mode. */ #define DO_SKIP_RX_PKT 0x8000 /* Skip Rx packet. */ /* RBC register bits */ #define RBC_COUNT_MASK 0x1fff /* Mask for byte count. */ #define RBC_RX_FULL 0x2000 /* Receive full packet. */ #define RBC_RX_PARTIAL 0x4000 /* Receive partial packet. */ #define RBC_RX_PKT_REJ 0x8000 /* Receive packet rejected. */ /* ISR0(/IMR0) register bits */ #define ISR_TX_OFLOW 0x01 /* Transmit buffer overflow. */ #define ISR_PKT_TX 0x02 /* Packet transmitted. */ #define ISR_MAC_INT 0x04 /* MAC interrupt. */ #define ISR_RX_EARLY 0x10 /* Receive early packet. */ #define ISR_RX_FULL 0x20 /* Receive full packet. */ #define ISR_RX_PKT_REJ 0x40 /* Receive packet rejected. */ #define ISR_FORCED_INT 0x80 /* Forced interrupt. */ /* ECR register bits */ #define ECR_EARLY_TX 0x01 /* Early transmit mode. */ #define ECR_EARLY_RX 0x02 /* Early receive mode. */ #define ECR_FULL_DUPLEX 0x04 /* Full duplex select. */ #define ECR_LNK_PLS_DIS 0x20 /* Link pulse disable. */ #define ECR_SW_COMPAT 0x80 /* Software compatibility switch. */ /* GP0 register bits */ #define GP1_WR 0x01 /* GP1 pin output value. */ #define GP2_WR 0x02 /* GP2 pin output value. */ #define GP1_OUT 0x04 /* GP1 pin output select. */ #define GP2_OUT 0x08 /* GP2 pin output select. */ #define GP1_RD 0x10 /* GP1 pin input value. */ #define GP2_RD 0x20 /* GP2 pin input value. */ /* GP1 register bits */ #define POWER_UP 0x01 /* When 0, power down analogue part of chip. */ /* LED register bits */ #define LED0_SHIFT 0 /* LED0 Output shift & mask */ #define LED0_MASK 0x7 #define LED1_SHIFT 3 /* LED1 Output shift & mask */ #define LED1_MASK 0x38 #define LED0_RX_ENA 0x40 /* LED0 - receive enable */ #define LED1_RX_ENA 0x80 /* LED1 - receive enable */ /* LED3 register bits */ #define LED3_SHIFT 0 /* LED0 output shift & mask */ #define LED3_MASK 0x7 #define LED3_RX_ENA 0x40 /* LED0 - receive enable */ /* LED output values */ #define LED_DISABLE 0 /* LED disabled */ #define LED_COLL_ACT 1 /* Collision activity */ #define LED_COLL_INACT 2 /* (NOT) Collision activity */ #define LED_10MB_LINK 3 /* 10 Mb link detected */ #define LED_100MB_LINK 4 /* 100 Mb link detected */ #define LED_LINK 5 /* 10 Mb or 100 Mb link detected */ #define LED_AUTO 6 /* Automatic assertion */ #define LED_TX_ACT 7 /* Transmit activity */ /* MSR register bits */ #define SRAM_128K_EXT 0x01 /* 128K SRAM extension */ #define RBS_BIT16 0x02 /* RBS bit 16 */ #define SELECT_MII 0x08 /* Select MII */ #define HASH_TBL_ENA 0x20 /* Hash table enable */ /* GP2 register bits */ #define GP3_WR 0x01 /* GP3 pin output value. */ #define GP4_WR 0x02 /* GP4 pin output value. */ #define GP3_OUT 0x04 /* GP3 pin output select. */ #define GP4_OUT 0x08 /* GP4 pin output select. */ #define GP3_RD 0x10 /* GP3 pin input value. */ #define GP4_RD 0x20 /* GP4 pin input value. */ /* RSR register bits */ #define RSR_NOTMCAST 0x01 /* clear when multicast packet */ #define RSR_BCAST 0x02 /* set when broadcast packet */ #define RSR_TOO_LONG 0x04 /* set if packet is longer than 1518 octets */ #define RSR_ALIGNERR 0x10 /* incorrect CRC and last octet not complete */ #define RSR_CRCERR 0x20 /* incorrect CRC and last octet complete */ #define RSR_RX_OK 0x80 /* packet received okay */ /* CMD0 register bits */ #define ONLINE 0x04 /* Online */ #define OFFLINE 0x08 /* Online */ #define ENABLE_RX 0x20 /* Enable reciever */ #define DISABLE_RX 0x80 /* Disable receiver */ /* RX0Msk register bits */ #define PKT_TOO_LONG 0x02 /* Packet too long mask. */ #define CRC_ERR 0x08 /* CRC error mask. */ #define RX_OVERRUN 0x10 /* Receive overrun mask. */ #define RX_ABORT 0x40 /* Receive abort mask. */ #define RX_OK 0x80 /* Receive OK mask. */ /* TX0Msk register bits */ #define CARRIER_LOST 0x01 /* Carrier sense lost. */ #define EXCESSIVE_COLL 0x02 /* Excessive collisions mask. */ #define TX_UNDERRUN 0x08 /* Transmit underrun mask. */ #define LATE_COLLISION 0x10 /* Late collision mask. */ #define SQE 0x20 /* Signal quality error mask.. */ #define TX_ABORT 0x40 /* Transmit abort mask. */ #define TX_OK 0x80 /* Transmit OK mask. */ /* SWC1 register bits */ #define SWC1_IND_ADDR 0x01 /* Individual address enable. */ #define SWC1_MCAST_PROM 0x02 /* Multicast promiscuous enable. */ #define SWC1_PROMISC 0x04 /* Promiscuous mode enable. */ #define SWC1_BCAST_DIS 0x08 /* Broadcast disable. */ #define SWC1_MEDIA_SEL 0x40 /* Media select (Mohawk). */ #define SWC1_AUTO_MEDIA 0x80 /* Automatic media select (Mohawk). */ /* Misc. defines. */ #define PAGE(sc, page) \ bus_space_write_1((sc->sc_bst), (sc->sc_bsh), PR, (page)) /* * GP3 is connected to the MDC pin of the NS DP83840A PHY, GP4 is * connected to the MDIO pin. These are utility macros to enhance * readability of the code. */ #define MDC_LOW GP3_OUT #define MDC_HIGH (GP3_OUT | GP3_WR) #define MDIO_LOW GP4_OUT #define MDIO_HIGH (GP4_OUT | GP4_WR) #define MDIO GP4_RD /* Values found in MANFID. */ #define XIMEDIA_ETHER 0x01 #define XIMEDIA_TOKEN 0x02 #define XIMEDIA_ARC 0x04 #define XIMEDIA_WIRELESS 0x08 #define XIMEDIA_MODEM 0x10 #define XIMEDIA_GSM 0x20 #define XIPROD_IDMASK 0x0f #define XIPROD_POCKET 0x10 #define XIPROD_EXTERNAL 0x20 #define XIPROD_CREDITCARD 0x40 #define XIPROD_CARDBUS 0x80