/* $NetBSD: sdmmc_ioreg.h,v 1.2 2010/10/07 12:40:34 kiyohara Exp $ */ /* $OpenBSD: sdmmc_ioreg.h,v 1.4 2007/06/02 01:48:37 uwe Exp $ */ /* * Copyright (c) 2006 Uwe Stuehler * * Permission to use, copy, modify, and distribute this software for any * purpose with or without fee is hereby granted, provided that the above * copyright notice and this permission notice appear in all copies. * * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. */ #ifndef _SDMMC_IOREG_H_ #define _SDMMC_IOREG_H_ /* SDIO commands */ /* response type */ #define SD_IO_SEND_OP_COND 5 /* R4 */ #define SD_IO_RW_DIRECT 52 /* R5 */ #define SD_IO_RW_EXTENDED 53 /* R5? */ /* CMD52 arguments */ #define SD_ARG_CMD52_READ (0<<31) #define SD_ARG_CMD52_WRITE (1<<31) #define SD_ARG_CMD52_FUNC_SHIFT 28 #define SD_ARG_CMD52_FUNC_MASK 0x7 #define SD_ARG_CMD52_EXCHANGE (1<<27) #define SD_ARG_CMD52_REG_SHIFT 9 #define SD_ARG_CMD52_REG_MASK 0x1ffff #define SD_ARG_CMD52_DATA_SHIFT 0 #define SD_ARG_CMD52_DATA_MASK 0xff #define SD_R5_DATA(resp) ((resp)[0] & 0xff) /* CMD53 arguments */ #define SD_ARG_CMD53_READ (0<<31) #define SD_ARG_CMD53_WRITE (1<<31) #define SD_ARG_CMD53_FUNC_SHIFT 28 #define SD_ARG_CMD53_FUNC_MASK 0x7 #define SD_ARG_CMD53_BLOCK_MODE (1<<27) #define SD_ARG_CMD53_INCREMENT (1<<26) #define SD_ARG_CMD53_REG_SHIFT 9 #define SD_ARG_CMD53_REG_MASK 0x1ffff #define SD_ARG_CMD53_LENGTH_SHIFT 0 #define SD_ARG_CMD53_LENGTH_MASK 0x1ff #define SD_ARG_CMD53_LENGTH_MAX 64 /* XXX should be 511? */ /* 48-bit response decoding (32 bits w/o CRC) */ #define MMC_R4(resp) ((resp)[0]) #define MMC_R5(resp) ((resp)[0]) /* SD R4 response (IO OCR) */ #define SD_IO_OCR_MEM_READY (1<<31) #define SD_IO_OCR_NUM_FUNCTIONS(ocr) (((ocr) >> 28) & 0x7) #define SD_IO_OCR_MEM_PRESENT (1<<27) #define SD_IO_OCR_MASK 0x00fffff0 /* Card Common Control Registers (CCCR) */ #define SD_IO_CCCR_START 0x00000 #define SD_IO_CCCR_SIZE 0x100 #define SD_IO_CCCR_CCCR_SDIO_REV 0x00 #define SD_IO_CCCR_CCCR_REV(r) ((r) & 0xf) #define CCCR_CCCR_REV_1_00 0 #define CCCR_CCCR_REV_1_10 1 #define CCCR_CCCR_REV_1_20 2 #define SD_IO_CCCR_SDIO_REV(r) (((r) >> 4) & 0xf) #define CCCR_SDIO_REV_1_00 0 #define CCCR_SDIO_REV_1_10 1 #define CCCR_SDIO_REV_1_20 2 /* (unreleased) */ #define CCCR_SDIO_REV_2_00 3 #define SD_IO_CCCR_SPEC_REV 0x01 #define SD_IO_CCCR_SD_PHYS_SPEC_VER(r) ((r) & 0xf) #define CCCR_SD_PHYS_SPEC_VER_1_01 0 #define CCCR_SD_PHYS_SPEC_VER_1_10 1 #define CCCR_SD_PHYS_SPEC_VER_2_00 2 #define SD_IO_CCCR_FN_ENABLE 0x02 #define SD_IO_CCCR_FN_IOREADY 0x03 #define SD_IO_CCCR_FN_INTEN 0x04 #define CCCR_INTEN_INTM (1<<0) #define SD_IO_CCCR_FN_INTPENDING 0x05 #define SD_IO_CCCR_CTL 0x06 #define CCCR_CTL_RES (1<<3) #define SD_IO_CCCR_BUS_WIDTH 0x07 #define CCCR_BUS_WIDTH_4 (2<<0) #define CCCR_BUS_WIDTH_1 (0<<0) #define SD_IO_CCCR_CAPABILITY 0x08 #define CCCR_CAPS_SDC (1<<0) #define CCCR_CAPS_SMB (1<<1) /* Multi-Block support */ #define CCCR_CAPS_SRB (1<<2) /* Read Wait support */ #define CCCR_CAPS_SBS (1<<3) /* Suspend/Resume support */ #define CCCR_CAPS_S4MI (1<<4) /* intr support in 4-bit mode */ #define CCCR_CAPS_E4MI (1<<5) /* enable intr in 4-bit mode */ #define CCCR_CAPS_LSC (1<<6) /* Low speed card */ #define CCCR_CAPS_4BLS (1<<7) /* 4-bit support for low speed */ #define SD_IO_CCCR_CISPTR 0x09 /* XXX 9-10, 10-11, or 9-12 */ #define SD_IO_CCCR_BUS_SUSPEND 0x0c #define SD_IO_CCCR_FUNC_SELECT 0x0d #define CCCR_FUNC_FS(r) ((r) & 0xf) #define CCCR_FUNC_FS_FN(fn) ((fn) & 0x7) #define CCCR_FUNC_FS_MEM 8 #define SD_IO_CCCR_FN_EXEC_FLG 0x0e #define SD_IO_CCCR_FN_READY_FLG 0x0f #define SD_IO_CCCR_FN0_BLKSIZ 0x10 /* 0x10-0x11 */ #define SD_IO_CCCR_POWER_CTL 0x12 #define SD_IO_CCCR_HIGH_SPEED 0x13 #define CCCR_HIGH_SPEED_SHS (1<<0) /* Support High-Speed */ #define CCCR_HIGH_SPEED_EHS (1<<1) /* Enable High-Speed */ /* Function Basic Registers (FBR) */ #define SD_IO_FBR_START 0x00100 #define SD_IO_FBR_SIZE 0x100 #define SD_IO_FBR(func) ((((func) - 1) * SD_IO_FBR_SIZE) + SD_IO_FBR_START) #define FBR_STD_FUNC_IF_CODE(v) ((v) & 0x0f) /* Card Information Structure (CIS) */ #define SD_IO_CIS_START 0x01000 #define SD_IO_CIS_SIZE 0x17000 /* SDIO Standard Function Interface code */ #define SD_IO_SFIC_NO_STANDARD 0x0 #define SD_IO_SFIC_UART 0x1 #define SD_IO_SFIC_TYPEA_BLUETOOTH 0x2 /* Type-A Bluetooth */ #define SD_IO_SFIC_TYPEB_BLUETOOTH 0x3 /* Type-B Bluetooth */ #define SD_IO_SFIC_GPS 0x4 #define SD_IO_SFIC_CAMERA 0x5 #define SD_IO_SFIC_PHS 0x6 #define SD_IO_SFIC_WLAN 0x7 #define SD_IO_SFIC_ATA 0x8 /* Embedded SDIO-ATA */ #endif /* _SDMMC_IOREG_H_ */