/* $NetBSD: if_upl.c,v 1.59.8.2 2018/01/31 18:01:54 martin Exp $ */ /* * Copyright (c) 2000 The NetBSD Foundation, Inc. * All rights reserved. * * This code is derived from software contributed to The NetBSD Foundation * by Lennart Augustsson (lennart@augustsson.net) at * Carlstedt Research & Technology. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE * POSSIBILITY OF SUCH DAMAGE. */ /* * Prolific PL2301/PL2302 driver */ #include __KERNEL_RCSID(0, "$NetBSD: if_upl.c,v 1.59.8.2 2018/01/31 18:01:54 martin Exp $"); #ifdef _KERNEL_OPT #include "opt_inet.h" #include "opt_usb.h" #endif #include #include #include #include #include #include #include #include #include #include #include #include #include #include #ifdef INET #include #include #include #endif #include #include #include #include /* * 7 6 5 4 3 2 1 0 * tx rx 1 0 * 1110 0000 rxdata * 1010 0000 idle * 0010 0000 tx over * 0110 tx over + rxd */ #define UPL_RXDATA 0x40 #define UPL_TXOK 0x80 #define UPL_INTR_PKTLEN 1 #define UPL_CONFIG_NO 1 #define UPL_IFACE_IDX 0 /***/ #define UPL_INTR_INTERVAL 20 #define UPL_BUFSZ 1024 #define UPL_RX_FRAMES 1 #define UPL_TX_FRAMES 1 #define UPL_RX_LIST_CNT 1 #define UPL_TX_LIST_CNT 1 #define UPL_ENDPT_RX 0x0 #define UPL_ENDPT_TX 0x1 #define UPL_ENDPT_INTR 0x2 #define UPL_ENDPT_MAX 0x3 struct upl_type { uint16_t upl_vid; uint16_t upl_did; }; struct upl_softc; struct upl_chain { struct upl_softc *upl_sc; struct usbd_xfer *upl_xfer; char *upl_buf; struct mbuf *upl_mbuf; int upl_idx; }; struct upl_cdata { struct upl_chain upl_tx_chain[UPL_TX_LIST_CNT]; struct upl_chain upl_rx_chain[UPL_RX_LIST_CNT]; int upl_tx_prod; int upl_tx_cons; int upl_tx_cnt; int upl_rx_prod; }; struct upl_softc { device_t sc_dev; struct ifnet sc_if; krndsource_t sc_rnd_source; struct callout sc_stat_ch; struct usbd_device * sc_udev; struct usbd_interface * sc_iface; uint16_t sc_vendor; uint16_t sc_product; int sc_ed[UPL_ENDPT_MAX]; struct usbd_pipe * sc_ep[UPL_ENDPT_MAX]; struct upl_cdata sc_cdata; uByte sc_ibuf; char sc_dying; char sc_attached; u_int sc_rx_errs; struct timeval sc_rx_notice; u_int sc_intr_errs; }; #ifdef UPL_DEBUG #define DPRINTF(x) if (upldebug) printf x #define DPRINTFN(n,x) if (upldebug >= (n)) printf x int upldebug = 0; #else #define DPRINTF(x) #define DPRINTFN(n,x) #endif /* * Various supported device vendors/products. */ Static struct upl_type sc_devs[] = { { USB_VENDOR_PROLIFIC, USB_PRODUCT_PROLIFIC_PL2301 }, { USB_VENDOR_PROLIFIC, USB_PRODUCT_PROLIFIC_PL2302 }, { 0, 0 } }; int upl_match(device_t, cfdata_t, void *); void upl_attach(device_t, device_t, void *); int upl_detach(device_t, int); int upl_activate(device_t, enum devact); extern struct cfdriver upl_cd; CFATTACH_DECL_NEW(upl, sizeof(struct upl_softc), upl_match, upl_attach, upl_detach, upl_activate); Static int upl_openpipes(struct upl_softc *); Static int upl_tx_list_init(struct upl_softc *); Static int upl_rx_list_init(struct upl_softc *); Static int upl_newbuf(struct upl_softc *, struct upl_chain *, struct mbuf *); Static int upl_send(struct upl_softc *, struct mbuf *, int); Static void upl_intr(struct usbd_xfer *, void *, usbd_status); Static void upl_rxeof(struct usbd_xfer *, void *, usbd_status); Static void upl_txeof(struct usbd_xfer *, void *, usbd_status); Static void upl_start(struct ifnet *); Static int upl_ioctl(struct ifnet *, u_long, void *); Static void upl_init(void *); Static void upl_stop(struct upl_softc *); Static void upl_watchdog(struct ifnet *); Static int upl_output(struct ifnet *, struct mbuf *, const struct sockaddr *, const struct rtentry *); Static void upl_input(struct ifnet *, struct mbuf *); /* * Probe for a Prolific chip. */ int upl_match(device_t parent, cfdata_t match, void *aux) { struct usb_attach_arg *uaa = aux; struct upl_type *t; for (t = sc_devs; t->upl_vid != 0; t++) if (uaa->uaa_vendor == t->upl_vid && uaa->uaa_product == t->upl_did) return UMATCH_VENDOR_PRODUCT; return UMATCH_NONE; } void upl_attach(device_t parent, device_t self, void *aux) { struct upl_softc *sc = device_private(self); struct usb_attach_arg *uaa = aux; char *devinfop; int s; struct usbd_device * dev = uaa->uaa_device; struct usbd_interface * iface; usbd_status err; struct ifnet *ifp; usb_interface_descriptor_t *id; usb_endpoint_descriptor_t *ed; int i; int rv; DPRINTFN(5,(" : upl_attach: sc=%p, dev=%p", sc, dev)); sc->sc_dev = self; aprint_naive("\n"); aprint_normal("\n"); devinfop = usbd_devinfo_alloc(dev, 0); aprint_normal_dev(self, "%s\n", devinfop); usbd_devinfo_free(devinfop); err = usbd_set_config_no(dev, UPL_CONFIG_NO, 1); if (err) { aprint_error_dev(self, "failed to set configuration" ", err=%s\n", usbd_errstr(err)); return; } sc->sc_udev = dev; sc->sc_product = uaa->uaa_product; sc->sc_vendor = uaa->uaa_vendor; err = usbd_device2interface_handle(dev, UPL_IFACE_IDX, &iface); if (err) { aprint_error_dev(self, "getting interface handle failed\n"); return; } sc->sc_iface = iface; id = usbd_get_interface_descriptor(iface); /* Find endpoints. */ for (i = 0; i < id->bNumEndpoints; i++) { ed = usbd_interface2endpoint_descriptor(iface, i); if (ed == NULL) { aprint_error_dev(self, "couldn't get ep %d\n", i); return; } if (UE_GET_DIR(ed->bEndpointAddress) == UE_DIR_IN && UE_GET_XFERTYPE(ed->bmAttributes) == UE_BULK) { sc->sc_ed[UPL_ENDPT_RX] = ed->bEndpointAddress; } else if (UE_GET_DIR(ed->bEndpointAddress) == UE_DIR_OUT && UE_GET_XFERTYPE(ed->bmAttributes) == UE_BULK) { sc->sc_ed[UPL_ENDPT_TX] = ed->bEndpointAddress; } else if (UE_GET_DIR(ed->bEndpointAddress) == UE_DIR_IN && UE_GET_XFERTYPE(ed->bmAttributes) == UE_INTERRUPT) { sc->sc_ed[UPL_ENDPT_INTR] = ed->bEndpointAddress; } } if (sc->sc_ed[UPL_ENDPT_RX] == 0 || sc->sc_ed[UPL_ENDPT_TX] == 0 || sc->sc_ed[UPL_ENDPT_INTR] == 0) { aprint_error_dev(self, "missing endpoint\n"); return; } s = splnet(); /* Initialize interface info.*/ ifp = &sc->sc_if; ifp->if_softc = sc; ifp->if_mtu = UPL_BUFSZ; ifp->if_flags = IFF_POINTOPOINT | IFF_NOARP | IFF_SIMPLEX; ifp->if_ioctl = upl_ioctl; ifp->if_start = upl_start; ifp->if_watchdog = upl_watchdog; strlcpy(ifp->if_xname, device_xname(sc->sc_dev), IFNAMSIZ); ifp->if_type = IFT_OTHER; ifp->if_addrlen = 0; ifp->if_hdrlen = 0; ifp->if_output = upl_output; ifp->_if_input = upl_input; ifp->if_baudrate = 12000000; ifp->if_dlt = DLT_RAW; IFQ_SET_READY(&ifp->if_snd); /* Attach the interface. */ rv = if_initialize(ifp); if (rv != 0) { aprint_error_dev(self, "if_initialize failed(%d)\n", rv); splx(s); return; } if_register(ifp); if_alloc_sadl(ifp); bpf_attach(ifp, DLT_RAW, 0); rnd_attach_source(&sc->sc_rnd_source, device_xname(sc->sc_dev), RND_TYPE_NET, RND_FLAG_DEFAULT); sc->sc_attached = 1; splx(s); usbd_add_drv_event(USB_EVENT_DRIVER_ATTACH, sc->sc_udev, sc->sc_dev); return; } int upl_detach(device_t self, int flags) { struct upl_softc *sc = device_private(self); struct ifnet *ifp = &sc->sc_if; int s; DPRINTFN(2,("%s: %s: enter\n", device_xname(sc->sc_dev), __func__)); s = splusb(); if (!sc->sc_attached) { /* Detached before attached finished, so just bail out. */ splx(s); return 0; } if (ifp->if_flags & IFF_RUNNING) upl_stop(sc); rnd_detach_source(&sc->sc_rnd_source); bpf_detach(ifp); if_detach(ifp); #ifdef DIAGNOSTIC if (sc->sc_ep[UPL_ENDPT_TX] != NULL || sc->sc_ep[UPL_ENDPT_RX] != NULL || sc->sc_ep[UPL_ENDPT_INTR] != NULL) aprint_debug_dev(self, "detach has active endpoints\n"); #endif sc->sc_attached = 0; splx(s); usbd_add_drv_event(USB_EVENT_DRIVER_DETACH, sc->sc_udev, sc->sc_dev); return 0; } int upl_activate(device_t self, enum devact act) { struct upl_softc *sc = device_private(self); DPRINTFN(2,("%s: %s: enter\n", device_xname(sc->sc_dev), __func__)); switch (act) { case DVACT_DEACTIVATE: /* Deactivate the interface. */ if_deactivate(&sc->sc_if); sc->sc_dying = 1; return 0; default: return EOPNOTSUPP; } } /* * Initialize an RX descriptor and attach an MBUF cluster. */ Static int upl_newbuf(struct upl_softc *sc, struct upl_chain *c, struct mbuf *m) { struct mbuf *m_new = NULL; DPRINTFN(8,("%s: %s: enter\n", device_xname(sc->sc_dev), __func__)); if (m == NULL) { MGETHDR(m_new, M_DONTWAIT, MT_DATA); if (m_new == NULL) { printf("%s: no memory for rx list " "-- packet dropped!\n", device_xname(sc->sc_dev)); return ENOBUFS; } MCLGET(m_new, M_DONTWAIT); if (!(m_new->m_flags & M_EXT)) { printf("%s: no memory for rx list " "-- packet dropped!\n", device_xname(sc->sc_dev)); m_freem(m_new); return ENOBUFS; } m_new->m_len = m_new->m_pkthdr.len = MCLBYTES; } else { m_new = m; m_new->m_len = m_new->m_pkthdr.len = MCLBYTES; m_new->m_data = m_new->m_ext.ext_buf; } c->upl_mbuf = m_new; return 0; } Static int upl_rx_list_init(struct upl_softc *sc) { struct upl_cdata *cd; struct upl_chain *c; int i; DPRINTFN(5,("%s: %s: enter\n", device_xname(sc->sc_dev), __func__)); cd = &sc->sc_cdata; for (i = 0; i < UPL_RX_LIST_CNT; i++) { c = &cd->upl_rx_chain[i]; c->upl_sc = sc; c->upl_idx = i; if (upl_newbuf(sc, c, NULL) == ENOBUFS) return ENOBUFS; if (c->upl_xfer == NULL) { int error = usbd_create_xfer(sc->sc_ep[UPL_ENDPT_RX], UPL_BUFSZ, 0, 0, &c->upl_xfer); if (error) return error; c->upl_buf = usbd_get_buffer(c->upl_xfer); } } return 0; } Static int upl_tx_list_init(struct upl_softc *sc) { struct upl_cdata *cd; struct upl_chain *c; int i; DPRINTFN(5,("%s: %s: enter\n", device_xname(sc->sc_dev), __func__)); cd = &sc->sc_cdata; for (i = 0; i < UPL_TX_LIST_CNT; i++) { c = &cd->upl_tx_chain[i]; c->upl_sc = sc; c->upl_idx = i; c->upl_mbuf = NULL; if (c->upl_xfer == NULL) { int error = usbd_create_xfer(sc->sc_ep[UPL_ENDPT_TX], UPL_BUFSZ, 0, 0, &c->upl_xfer); if (error) return error; c->upl_buf = usbd_get_buffer(c->upl_xfer); } } return 0; } /* * A frame has been uploaded: pass the resulting mbuf chain up to * the higher level protocols. */ Static void upl_rxeof(struct usbd_xfer *xfer, void *priv, usbd_status status) { struct upl_chain *c = priv; struct upl_softc *sc = c->upl_sc; struct ifnet *ifp = &sc->sc_if; struct mbuf *m; int total_len = 0; int s; if (sc->sc_dying) return; if (!(ifp->if_flags & IFF_RUNNING)) return; if (status != USBD_NORMAL_COMPLETION) { if (status == USBD_NOT_STARTED || status == USBD_CANCELLED) return; sc->sc_rx_errs++; if (usbd_ratecheck(&sc->sc_rx_notice)) { printf("%s: %u usb errors on rx: %s\n", device_xname(sc->sc_dev), sc->sc_rx_errs, usbd_errstr(status)); sc->sc_rx_errs = 0; } if (status == USBD_STALLED) usbd_clear_endpoint_stall_async(sc->sc_ep[UPL_ENDPT_RX]); goto done; } usbd_get_xfer_status(xfer, NULL, NULL, &total_len, NULL); DPRINTFN(9,("%s: %s: enter status=%d length=%d\n", device_xname(sc->sc_dev), __func__, status, total_len)); m = c->upl_mbuf; memcpy(mtod(c->upl_mbuf, char *), c->upl_buf, total_len); m->m_pkthdr.len = m->m_len = total_len; m_set_rcvif(m, ifp); s = splnet(); /* XXX ugly */ if (upl_newbuf(sc, c, NULL) == ENOBUFS) { ifp->if_ierrors++; goto done1; } DPRINTFN(10,("%s: %s: deliver %d\n", device_xname(sc->sc_dev), __func__, m->m_len)); if_input((ifp), (m)); done1: splx(s); done: #if 1 /* Setup new transfer. */ usbd_setup_xfer(c->upl_xfer, c, c->upl_buf, UPL_BUFSZ, USBD_SHORT_XFER_OK, USBD_NO_TIMEOUT, upl_rxeof); usbd_transfer(c->upl_xfer); DPRINTFN(10,("%s: %s: start rx\n", device_xname(sc->sc_dev), __func__)); #endif } /* * A frame was downloaded to the chip. It's safe for us to clean up * the list buffers. */ Static void upl_txeof(struct usbd_xfer *xfer, void *priv, usbd_status status) { struct upl_chain *c = priv; struct upl_softc *sc = c->upl_sc; struct ifnet *ifp = &sc->sc_if; int s; if (sc->sc_dying) return; s = splnet(); DPRINTFN(10,("%s: %s: enter status=%d\n", device_xname(sc->sc_dev), __func__, status)); ifp->if_timer = 0; ifp->if_flags &= ~IFF_OACTIVE; if (status != USBD_NORMAL_COMPLETION) { if (status == USBD_NOT_STARTED || status == USBD_CANCELLED) { splx(s); return; } ifp->if_oerrors++; printf("%s: usb error on tx: %s\n", device_xname(sc->sc_dev), usbd_errstr(status)); if (status == USBD_STALLED) usbd_clear_endpoint_stall_async(sc->sc_ep[UPL_ENDPT_TX]); splx(s); return; } ifp->if_opackets++; m_freem(c->upl_mbuf); c->upl_mbuf = NULL; if (IFQ_IS_EMPTY(&ifp->if_snd) == 0) upl_start(ifp); splx(s); } Static int upl_send(struct upl_softc *sc, struct mbuf *m, int idx) { int total_len; struct upl_chain *c; usbd_status err; c = &sc->sc_cdata.upl_tx_chain[idx]; /* * Copy the mbuf data into a contiguous buffer, leaving two * bytes at the beginning to hold the frame length. */ m_copydata(m, 0, m->m_pkthdr.len, c->upl_buf); c->upl_mbuf = m; total_len = m->m_pkthdr.len; DPRINTFN(10,("%s: %s: total_len=%d\n", device_xname(sc->sc_dev), __func__, total_len)); usbd_setup_xfer(c->upl_xfer, c, c->upl_buf, total_len, 0, USBD_DEFAULT_TIMEOUT, upl_txeof); /* Transmit */ err = usbd_transfer(c->upl_xfer); if (err != USBD_IN_PROGRESS) { printf("%s: upl_send error=%s\n", device_xname(sc->sc_dev), usbd_errstr(err)); upl_stop(sc); return EIO; } sc->sc_cdata.upl_tx_cnt++; return 0; } Static void upl_start(struct ifnet *ifp) { struct upl_softc *sc = ifp->if_softc; struct mbuf *m_head = NULL; if (sc->sc_dying) return; DPRINTFN(10,("%s: %s: enter\n", device_xname(sc->sc_dev),__func__)); if (ifp->if_flags & IFF_OACTIVE) return; IFQ_POLL(&ifp->if_snd, m_head); if (m_head == NULL) return; if (upl_send(sc, m_head, 0)) { ifp->if_flags |= IFF_OACTIVE; return; } IFQ_DEQUEUE(&ifp->if_snd, m_head); /* * If there's a BPF listener, bounce a copy of this frame * to him. */ bpf_mtap(ifp, m_head); ifp->if_flags |= IFF_OACTIVE; /* * Set a timeout in case the chip goes out to lunch. */ ifp->if_timer = 5; } Static void upl_init(void *xsc) { struct upl_softc *sc = xsc; struct ifnet *ifp = &sc->sc_if; int s; if (sc->sc_dying) return; DPRINTFN(10,("%s: %s: enter\n", device_xname(sc->sc_dev),__func__)); if (ifp->if_flags & IFF_RUNNING) return; s = splnet(); if (sc->sc_ep[UPL_ENDPT_RX] == NULL) { if (upl_openpipes(sc)) { splx(s); return; } } /* Init TX ring. */ if (upl_tx_list_init(sc)) { printf("%s: tx list init failed\n", device_xname(sc->sc_dev)); splx(s); return; } /* Init RX ring. */ if (upl_rx_list_init(sc)) { printf("%s: rx list init failed\n", device_xname(sc->sc_dev)); splx(s); return; } /* Start up the receive pipe. */ for (int i = 0; i < UPL_RX_LIST_CNT; i++) { struct upl_chain *c = &sc->sc_cdata.upl_rx_chain[i]; usbd_setup_xfer(c->upl_xfer, c, c->upl_buf, UPL_BUFSZ, USBD_SHORT_XFER_OK, USBD_NO_TIMEOUT, upl_rxeof); usbd_transfer(c->upl_xfer); } ifp->if_flags |= IFF_RUNNING; ifp->if_flags &= ~IFF_OACTIVE; splx(s); } Static int upl_openpipes(struct upl_softc *sc) { usbd_status err; /* Open RX and TX pipes. */ err = usbd_open_pipe(sc->sc_iface, sc->sc_ed[UPL_ENDPT_RX], USBD_EXCLUSIVE_USE, &sc->sc_ep[UPL_ENDPT_RX]); if (err) { printf("%s: open rx pipe failed: %s\n", device_xname(sc->sc_dev), usbd_errstr(err)); return EIO; } err = usbd_open_pipe(sc->sc_iface, sc->sc_ed[UPL_ENDPT_TX], USBD_EXCLUSIVE_USE, &sc->sc_ep[UPL_ENDPT_TX]); if (err) { printf("%s: open tx pipe failed: %s\n", device_xname(sc->sc_dev), usbd_errstr(err)); return EIO; } err = usbd_open_pipe_intr(sc->sc_iface, sc->sc_ed[UPL_ENDPT_INTR], USBD_EXCLUSIVE_USE, &sc->sc_ep[UPL_ENDPT_INTR], sc, &sc->sc_ibuf, UPL_INTR_PKTLEN, upl_intr, UPL_INTR_INTERVAL); if (err) { printf("%s: open intr pipe failed: %s\n", device_xname(sc->sc_dev), usbd_errstr(err)); return EIO; } return 0; } Static void upl_intr(struct usbd_xfer *xfer, void *priv, usbd_status status) { struct upl_softc *sc = priv; struct ifnet *ifp = &sc->sc_if; uByte stat; DPRINTFN(15,("%s: %s: enter\n", device_xname(sc->sc_dev),__func__)); if (sc->sc_dying) return; if (!(ifp->if_flags & IFF_RUNNING)) return; if (status != USBD_NORMAL_COMPLETION) { if (status == USBD_NOT_STARTED || status == USBD_CANCELLED) { return; } sc->sc_intr_errs++; if (usbd_ratecheck(&sc->sc_rx_notice)) { printf("%s: %u usb errors on intr: %s\n", device_xname(sc->sc_dev), sc->sc_rx_errs, usbd_errstr(status)); sc->sc_intr_errs = 0; } if (status == USBD_STALLED) usbd_clear_endpoint_stall_async(sc->sc_ep[UPL_ENDPT_RX]); return; } stat = sc->sc_ibuf; if (stat == 0) return; DPRINTFN(10,("%s: %s: stat=0x%02x\n", device_xname(sc->sc_dev), __func__, stat)); } Static int upl_ioctl(struct ifnet *ifp, u_long command, void *data) { struct upl_softc *sc = ifp->if_softc; struct ifaddr *ifa = (struct ifaddr *)data; struct ifreq *ifr = (struct ifreq *)data; int s, error = 0; if (sc->sc_dying) return EIO; DPRINTFN(5,("%s: %s: cmd=0x%08lx\n", device_xname(sc->sc_dev), __func__, command)); s = splnet(); switch(command) { case SIOCINITIFADDR: ifp->if_flags |= IFF_UP; upl_init(sc); switch (ifa->ifa_addr->sa_family) { #ifdef INET case AF_INET: break; #endif /* INET */ } break; case SIOCSIFMTU: if (ifr->ifr_mtu > UPL_BUFSZ) error = EINVAL; else if ((error = ifioctl_common(ifp, command, data)) == ENETRESET) error = 0; break; case SIOCSIFFLAGS: if ((error = ifioctl_common(ifp, command, data)) != 0) break; /* XXX re-use ether_ioctl() */ switch (ifp->if_flags & (IFF_UP|IFF_RUNNING)) { case IFF_UP: upl_init(sc); break; case IFF_RUNNING: upl_stop(sc); break; default: break; } break; default: error = ifioctl_common(ifp, command, data); break; } splx(s); return error; } Static void upl_watchdog(struct ifnet *ifp) { struct upl_softc *sc = ifp->if_softc; DPRINTFN(5,("%s: %s: enter\n", device_xname(sc->sc_dev),__func__)); if (sc->sc_dying) return; ifp->if_oerrors++; printf("%s: watchdog timeout\n", device_xname(sc->sc_dev)); upl_stop(sc); upl_init(sc); if (IFQ_IS_EMPTY(&ifp->if_snd) == 0) upl_start(ifp); } /* * Stop the adapter and free any mbufs allocated to the * RX and TX lists. */ Static void upl_stop(struct upl_softc *sc) { usbd_status err; struct ifnet *ifp; int i; DPRINTFN(10,("%s: %s: enter\n", device_xname(sc->sc_dev),__func__)); ifp = &sc->sc_if; ifp->if_timer = 0; /* Stop transfers. */ if (sc->sc_ep[UPL_ENDPT_RX] != NULL) { err = usbd_abort_pipe(sc->sc_ep[UPL_ENDPT_RX]); if (err) { printf("%s: abort rx pipe failed: %s\n", device_xname(sc->sc_dev), usbd_errstr(err)); } } if (sc->sc_ep[UPL_ENDPT_TX] != NULL) { err = usbd_abort_pipe(sc->sc_ep[UPL_ENDPT_TX]); if (err) { printf("%s: abort tx pipe failed: %s\n", device_xname(sc->sc_dev), usbd_errstr(err)); } } if (sc->sc_ep[UPL_ENDPT_INTR] != NULL) { err = usbd_abort_pipe(sc->sc_ep[UPL_ENDPT_INTR]); if (err) { printf("%s: abort intr pipe failed: %s\n", device_xname(sc->sc_dev), usbd_errstr(err)); } } /* Free RX resources. */ for (i = 0; i < UPL_RX_LIST_CNT; i++) { if (sc->sc_cdata.upl_rx_chain[i].upl_mbuf != NULL) { m_freem(sc->sc_cdata.upl_rx_chain[i].upl_mbuf); sc->sc_cdata.upl_rx_chain[i].upl_mbuf = NULL; } } /* Free TX resources. */ for (i = 0; i < UPL_TX_LIST_CNT; i++) { if (sc->sc_cdata.upl_tx_chain[i].upl_mbuf != NULL) { m_freem(sc->sc_cdata.upl_tx_chain[i].upl_mbuf); sc->sc_cdata.upl_tx_chain[i].upl_mbuf = NULL; } if (sc->sc_cdata.upl_tx_chain[i].upl_xfer != NULL) { usbd_destroy_xfer(sc->sc_cdata.upl_tx_chain[i].upl_xfer); sc->sc_cdata.upl_tx_chain[i].upl_xfer = NULL; } } /* Close pipes */ if (sc->sc_ep[UPL_ENDPT_RX] != NULL) { err = usbd_close_pipe(sc->sc_ep[UPL_ENDPT_RX]); if (err) { printf("%s: close rx pipe failed: %s\n", device_xname(sc->sc_dev), usbd_errstr(err)); } sc->sc_ep[UPL_ENDPT_RX] = NULL; } if (sc->sc_ep[UPL_ENDPT_TX] != NULL) { err = usbd_close_pipe(sc->sc_ep[UPL_ENDPT_TX]); if (err) { printf("%s: close tx pipe failed: %s\n", device_xname(sc->sc_dev), usbd_errstr(err)); } sc->sc_ep[UPL_ENDPT_TX] = NULL; } if (sc->sc_ep[UPL_ENDPT_INTR] != NULL) { err = usbd_close_pipe(sc->sc_ep[UPL_ENDPT_INTR]); if (err) { printf("%s: close intr pipe failed: %s\n", device_xname(sc->sc_dev), usbd_errstr(err)); } sc->sc_ep[UPL_ENDPT_INTR] = NULL; } ifp->if_flags &= ~(IFF_RUNNING | IFF_OACTIVE); } Static int upl_output(struct ifnet *ifp, struct mbuf *m, const struct sockaddr *dst, const struct rtentry *rt0) { int error; DPRINTFN(10,("%s: %s: enter\n", device_xname(((struct upl_softc *)ifp->if_softc)->sc_dev), __func__)); /* * if the queueing discipline needs packet classification, * do it now. */ IFQ_CLASSIFY(&ifp->if_snd, m, dst->sa_family); /* * Queue message on interface, and start output if interface * not yet active. */ error = if_transmit_lock(ifp, m); return error; } Static void upl_input(struct ifnet *ifp, struct mbuf *m) { #ifdef INET size_t pktlen = m->m_len; int s; s = splnet(); if (__predict_false(!pktq_enqueue(ip_pktq, m, 0))) { ifp->if_iqdrops++; m_freem(m); } else { ifp->if_ipackets++; ifp->if_ibytes += pktlen; } splx(s); #endif }